SPECIAL REPAIR TO ROAD ALONG SECURITY WALL AT 15 FAD JINDRAH UNDER GE (AEMY) DHAR ROAD

M&L scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm exc 50mm and n exc 100mm including removing the material to a distance not exc 50m and stacking complete as all specified and directed.

Material & Labour for 150mm thick laid in two layers of 75mm thick each (compacted thickness) WBM with coarse aggregates (granite, trap or basalt) of grading 2 (63 to 40 mm size) or of grading 3 ( 50 to 20 mm size), spread rolled and consolidated to gredient and camber required including forming clay puddle bunds (retaining fillets) on both edges of spread aggregates and rolled with 8 to 12 tonne power roller complete all as specified and directed.

Material & Labour for preparing unsurfaced water bound macadam surface by brushing with wire burshes for removing caked mud etc, Sweeping with brooms and finally fanning the cleaned surfaces with gunny bags or with mechanical air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer (paving bitumen VG-10) @ 10 kg per 10 sqm complete all as specified and directed.

Material & Labour for laying premix bituminous macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) using binder content of paving bitumin (VG-30) by 4% weight of total mix, for repair to road edge, depression, speed breaker, potholes etc complete all as specified and directed.

Material & Labour for applying evenly a priming/ tack coat with bituminous primer (paving bitumen VG-30) @ 5 Kg per 10Sqm on black top surface of bituminous macadam complete all as specified and directed.

Material & Labour for bituminous semi-dense asphaltic concrete 40 mm consolidated thickness with paver with 5.5% binder content by weight of total mix (paving bitumen VG-30) laid with mechanically paver and material transported in tipped (covered) rolled with vibrating roller and compacted to required camber and gradient with 8 to 12 tonne power roller complete all as specified and directed. .

Surface dressing not exc 15cm deep in any type of soil for berms complete all as specified and directed

M&L for moorum filling in pavings, laid in layers not exc 15cm thick, spread, levelled and rammed to form uniform and consolidated surface with and including watering complete all as specified and directed.

Material & Labour for repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) and rolled with 8 to 10 tonne power roller to a uniform smooth surface completed all as specified and directed.

Material & Labour for providing and applying hot thermo plastic marking paint for making white traffic lines 2.5mm thick having clear and sharp edges over new /old road surfaces including straight portion, curve portion etc. The thermo plastic material shall be homogenously composed of aggregate pigment resin and glass reflectorizing beads in required percentage as specified. the quoted rate includes cleaning of road surface, heating the paints within tempreture limits specified by the manufacture, making proper arrangement for traffic operation etc. T&P etc, required for proper completion of work complete all as specified and directed.