Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹97.5 LAccepted-AOC 01 KHUMRIYAL KUPWARA KHUMRIYAL KUPWARA KUPWARA JAMMU KASHMIR 193223 | KUPWARA | JAMMU AND KASHMIR | 193223 | L1 | Accepted-AOC ACCEPT | |
| 2 | L2₹1.1 Cr+₹11.7 L (11.7%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹1.1 Cr+₹12.0 L (12.0%)Rejected-Finance KRAL PORA BAGH I MEHTAB NEAR MANCHOWA PETROL PUMP DISTRICT BUDGAM 190019 J K | BUDGAM | BUDGAM | J K | 190019 | L3 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹1.4 Cr
EMD Value
₹2.2 L
Closing Date
11 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF SRINAGAR
CWE AF SRINAGAR
ADDN ALTN TO CERTAIN OTM BUILDING AT 1 WING AF
2023_MES_630277_1
CWE(AF)SGR/SGR-33/2023-24
Open Tender
Civil Works
Item Rate
180 days
AF STN SRINAGAR
AS PER NIT
8 documents required · 8 mandatory
₹1,000
Yes
GE AF SRINAGAR
₹2.2 L
19 Mar 2024
29 Nov 2023
13 Jan 2024
29 Nov 2023
11 Jan 2024
28 Dec 2023
Amount
BUILDING
Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc, all as specified and directed.
Material and labour for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, all as specified and directed.
Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as spfd(except bricks)
Material and labour for Brick work with sub class 'B" old size bricks straight or curved of onplan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, all as specified and directed.
Material and labour for 10 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement, all as specified and directed.
Rendering 15 mm thick in two layers in(10 mm+5mm) cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth using integral water proofing compound complete all as specified .(WPC shall be measured and paid seperately)
Supply only integral water proofing compound.
Material and labour for for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 3mm thick wall care putty, all as specified and directed.
Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, all as spicified and directed.
Material and labour for complete removal of existing treatment from the old plastered, pointed/concrete wall surfaces and applying two coats of oil bound distemper over a coat of 3mm thick wall care putty, all as specified and directed.
Material and labour for complete removal of existing treatment from the old plastered, pointed/concrete wall surfaces and applying two coats of cement base paint, all as specified and directed.
Preparation of old painted wood and wooden base surfaces of any description over 10 cm width or girth and painting with one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Preparation of old painted steel surfaces of any description exc 10 cm width or girth and painting with one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Preparation of old plastered surfaces of walls and applying two coats of white wash complete all as specified and directed.
Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each , Complete all as specified and directed by Engineer-in-charge.
Taking down chowkats or frames including shutter (without taking off shutters from the frame) area exc.1.50 Sqm n.exc 4 Sqm each, Complete all as specified and directed by Engineer-in-charge.
Pressed steel frames 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh old bar, thickness of sheet 1.25mm and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) complete all as specified and directed.
Supply and fixing for aluminium frame for doors,windows, ventilators with powder coated (minimum thickness of powder coating 50 micron) of any colour ,with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
Supply and fixing for powder coated of any colour (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed.
Supply and fixing for powder coating of any colour(minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
Supply fabricated & fix in position aluminium powder coated(minimum thickness of powder coating 50 micron of approved colour) three track window(two shutters glazed & one shutters wire gauge) with frame glazed with 4 mm thick tinted glass and wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position,concealed type lock for all three shutter,PVC roller etc all as specified below,complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00x31.75x1.50 mm (Section No. 20831. (b) Frame(bottom) section shall of size 92.00x31.75x1.50 mm(Section No. 20832). (c) Top & side Members of shutter section shall be of size 18.00x40.00x1.55 (Section No. 20738). (d) Shutter interlock Section shall be be of size 18.00x40.00x1.45(section No. 20737). (e) Bottom Members of shutter section shall be of size 18.00x40.00x1.55 (Section No.20736). Note:- Section No. given above are of make Jindal,Contractor may use similar section of other approved make.
Supply and fixing for sheet glass 5.5mm thick, ordinary quality and glazing with aluminium glazing clips and rubber neosprine gasket in square or rectangular,with sheet glass is ground or obscured or frosted, on one side complete all as specified and directed.
Supply and fixing for sheet glass 4 mm thick, ordinary quality and glazing with aluminium glazing clips and rubber neosprine gasket in square or rectangular,complete all as specified and directed.
Supply and fixing for aluminium composite panels, 5mm thick as in doors/partition, of any colour, shape, size and design fixed on aluminium frame work including all necessary fittings and fixtures and necessary taping, complete all as per manufactures instructions, complete all as specified and directed.
Supply and fixing for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.
Supply and fixing steel window box type with tubular frame double rebate double shutter made ERW tubes including side hung shutters having glazing panels and gauged panel with gurad bars in corresponding to each other and fitted with box type hinges and handles dovetailed or welded peg stay and locking arrangements including one coat of red oxide zinc crome primer and PCC 1:3:6 type C1 using 20 mm gradede crushed stone aggregate for embedding of hold fast,complete all as specified and directed by Engr-in-Charge with ref to drawing No.CEUZ/TD/1269/2008
Supply and fixing for 3 mm thick sheet glass,ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane, complete all as specified and directed.
Plain framed factory made, panelled shutter 35mm thick (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated.
Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing for 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, Complete all as specified and directed by Engineer-in-charge.
Supply and fixing for Aluminium anodised, barrel tower bolts of extruded section and fixed 150 mm long, Complete all as specified and directed by Engineer-in-charge.
Supply and fixing for 150 mm long extruded aluminium handles, cast type, anodised, Complete all as specified and directed by Engineer-in-charge.
Supply and fixing for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, Complete all as specified and directed by Engineer-in-charge.
Supply and fixing for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, Complete all as specified and directed by Engineer-in-charge.
Supply and fixing for 125mm long aluminium handles, cast type, anodised, complete all as specified and directed.
Supply and fixing for 100 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and directed
Supply and fixing for 125 mm long butt hinges, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for, all as specified and directed.
Material and labour for 25 mm thick cement concrete type B-0, 1:2:4 1:2:4 (12.5mm graded aggregate) as in sub base complete all as specified and directed.
Material and labour for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry ,making uniform 5 mm wide joint using spacer and filling the joint with epoxy grout to match the shade of tiles, laid over including screed bed or bedding layer of mortar 15 mm thick for laying floor tiles in CM 1:4, Complete all as specified and directed by Engineer-in-charge.
Dismantlig of floor ,hearth or wall tiling or stone slab laid,bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat,including rubbish off the premises,all as specified and directed.
Material and labour for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular)as in vertical surface area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry ,making uniform 5 mm wide joint using spacer and filling the joint with epoxy grout to match the shade of tiles, laid over including screed bed or bedding layer of mortar 10 mm thick for laying floor tiles in CM 1:3, Complete all as specified and directed by Engineer-in-charge.
Material and labour for coloured glazed ceramic tiles in vertical surfaces 300x600x7mm thick set and jointed in neat cement slurry,making uniform 3 mm wide joint using spacer and filling the joint with epoxygrout to match the shade of tiles, over & including 10 mm thick backing coat in cement mortar (1:3) to receive wall tiles, complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.
Material and labour for double charged colour vitrified ceramic tiles 10 mm thick (square) polished, area of each tiles n.exc 0.36 sqm in floors/skirting etc laid over existing screed bed, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over including screed bed or bedding layer of mortar 15 mm thick for laying floor tiles in CM 1:4, Complete all as specified and directed.
Material and labour for machine cut kota stone slab flooring 20-25mm thick as in flooring/skirting over & including 20 mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed wiith pigment to match the shade of the slab with 150 mm wide white marble border all around including rubbing and polishing, complete all as specified and directed.
Demolition of cement concrete reinforced (reinforement cut as required to facilitate demolition) roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and removing form site all as specified and directed.
Material and labour for RCC (nominal mix) Type B1 1:2:4 using 20 mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs landings, balconies, canopies and in shelves and the like complete all as specified and directed.
Material and labour for form work to soffits of flat, fair finished surfaces of concrete of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping)
Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape including cranking bending spirallay for hooping for columns hooking end and binding with and including mild steel wire (annelead) not less than 0.9mm dia or scuring with clips.
Material and labour in repair 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.including screed bed bedding layer of 15 mm thick in CM1:4 complete all as secified and polished complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations.
Dismantling wall and ceiling boards, fibre pulp insulation etc or insulation boards/slabs/ blankets, any thickness, including cover fillets, all as specified and directed.
Supply and fixing for anodised aluminium snap grid frame work for false ceiling size of grid 605x605mm including hangers 6 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, all as specified and directed.
Material and labour for 12mm thick gypsum board 600mmx600mm in ceiling fixed with screw as per manufacturers instructions incl two coats of oil bound distemper over a coat 2 mm thick wall care putty,, all as specified and directed.
Material and labour for wooden panelling of second class softwood 12mm thick with tongue and groove joint fixed in any position over and including wooden framework in second class softwood with plain fillets square or rectangular in section clean sawn,secured with nails/screws of sectional area exc. 13 sqcm and nexc 25 sqcm at nexc. 90cm centre to centre in both direction and including three coats of french polishing on all the exposed surfaces including taking down existing electrical fittings and re-fixing the same locations as directed complete all as specified and diected.
Supply and fixing for Curtain rods 25 dia with PVC coating on hollow MS steel rods fancy type with brackets, corner & fancy types fineals complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, all as specified and directed.
Supply and fixing for 15 mm bore galvanized steel tubes, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, all as specified and directed.
Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, all as specified and directed.
Supply and fixing for 20 mm bore galvanized steel tubes, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, all as specified and directed.
Material and labour for lagging to 20mm dia pipes, all arround with 25mm thick bonded mineral wool pre-formed `snap on' pipe sections of density 144 Kg/cum conforming to IS 9842, all as specified and directed.
Vitreous china squatting pan, orrisa pattern, of size 580x440mm, white with integral foot rest with P or S trap including provision of cement concrete bedding (excluding flushing cistern and flush pipe) but including, making connections and demolition of concrete/lime concrete bedding for taking out existing broken squat pan complete all as directed at site.
Supply and fixing in repair, Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe , antisyphonage pipe , pvc cover sheet in same colour etc complete all as specified and directed.
Supply and fixing in repair for 10 ltr capacity PVC valveless, syphonic action type,twin/dual type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connection to pipes and incl 32mm dia pipe for low level cistern flush pipe, Complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repair, Vitreous china urinal half stall type white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe Complete all as specified and directed by Engineer-in-charge.
Supply and fixing for Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) Complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repairs for 15 mm bore dia pipe,fancy type bib taps, cast copper alloy chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repairs for 15 mm bore dia pipe, stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repair Vitreous China wash hand basin, white, flat back, size 550X400mm including cutting for and pinning in ends of brackets (including supply and fixing of brackets) or errecting stand, 32/40 mm brass chromium plated waste fitting with long screwed shank and fly nut flanged end bedded in red led cement, chain and plug and porcelain stopper complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repair for 15 mm bore dia pipe brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed,cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repair brass chromium plated overhead pressure adjustable shower with revolving joints with shower arms 125mm long heavy casted body with all fittings complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repair brass chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flanges complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repairs 15mm size PVC connections with brass nuts of length 600mm, all as specified.
Supply and fixing for waste coupling of PTMT (half or full threaded), minimum weight 45gms, suitable for discharge pipe of 32mm bore dia complete all as specified and directed.
Supply and fixing for waste pipe 32mm fixed to wash basin. complete all as specified and directed.
Supply and fixing in repairs soap dish of brass CP, Cat part No. 272130160051 of EVITA series of make - Somany or equivalnet, complete all as specified and directed by Engr-in-Charge.
Supply and fixing for chromium plated toilet paper holder make:-CERA complete all as specified and directed.
Supply and fixing in repair ABS plastic chromium plated Health faucet fixed with spring action and lever along with Flexible hose with brass nut of length 1 m to 1.2 m fitted in the existing water connection in the toilets, Complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.
Supply and fixing for PVC seat cover for EWC colour white including hinges, complete all as specified and as direted by the Engr-in-Charge.
Supply and fixing for Glass Shelf of size 500 mm x 125 mm wide with stainless steel wire guard fixed on wall with and including bracket and brass screws and wooden / plastic cleats. Make:- Prayag or equvallent make .
Supply and fixing for 32mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed. Complete all as specified and directed by Engineer-in-charge.
Supply and fixing for 300mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing for Door closer aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.
Supply and fixingin repairs PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors Complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repairs PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls Complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors Complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls Complete all as specified and directed by Engineer-in-charge.
Supply and fixing for 110mm PVC (SWR) WC connector with lip ring, Complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair PVC (SWR) 75 mm bore junction single, (Single T) equal or unequal complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair PVC (SWR) 110 mm bore junction single, (Single T) equal or unequal complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair PVC (SWR) bends any radius for 75 mm bore fitted with oval access doors complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair PVC (SWR) bends any radius for 110 mm bore fitted with oval access doors complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair 110mm bore PVC (SWR) 'P' trap complete all as specified and directed by Engr-in-charge.
Supply and fixing for PVC (SWR) vent cowl for 75 mm bore pipe, complete all as specified and directed by Engr-in-charge.
Supply and fixing in repairs grating doom 100mm dia of CP brass (minimum weight 25gms), all as specified and directed.
Supply and fixing in repairs CP stop valve/angle valve of 15mm bore, cast copper alloy screwed pressure with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed, all as specified and directed.
Supply and fixing for rotational moulded polyethylene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including hoisting, connecting including dismantling existing tank and removing to store, all as specified and directed.
Material and labour for ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 20mm.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, and removal of debries from site.
Supply and fixing for Pre- painted (in camouflage pattern) galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified specified and as directed by Engineer-in-charge
Supply and fixing for Pre-painted (in camouflage pattern) galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified all as specified and as directed by Engineer-in-charge
Dismantling timber scantling ,40 Sqcm and over in section in any position,including rafter and purlins framed work,complete all as specified and directed.
Supply and fixing for second class hard wood and scantling timber framed and fixed wrought complete all as specified and directed.
Material and labour for MS work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410- W (Gde- E-250) quality-B, all as specified and directed.
Supply and fixing for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe-410-W (Gde-E-250) quality A, complete all as specified and directed.
Supply and fixing for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long & diametre 16 to 20mm, all as specified and directed
Material and labour for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, all as specified and directed.
Material and labour for cement concrete type B-0 1:2:4 (using 12.5mm graded aggregates), as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.
Demolition of cement concrete (unreinforced) in ground floor and in paving n exc 15 cm thickness (below or above ground level), complete all as specified and directed.
Material and labour for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded aggregates), as in plinth protection, finished the surface even and smooth without using extra cement, all as specified and directed.
Supply and fixing in repair Powder coated superior quality venetian blinds horizontal or vertical type complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair sinks board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Supply and fixing in for Kitchen plate rack made of stainless steel 1 mm wall thickness with plugs washers as overall size of 75cm x 75 cm including fixing to wall and all assessaries in repair, Complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 15 mm bore dia pipe brass CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed,cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.
WATER STAGING
Excavation in trenches not exc 1.5m wide and not exc 1.5m deep for foundation etc or for shafts n.ecx 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil all as specified and directed.
Material and labour for PCC 1:4:8 type D-2 (using 40mm graded aggregates) as in bed concrete for foundation filling & mass concrete.
Material and labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil
Material and labour for form work to soffits of suspended slab and similar work n.exc 200mm thich (horizontal or sloping) for fair finished surfaces.
Material and labour for form work to edges of concrete flat and similar work exc 10cm but n.exc 20cm wide for fair finished surfaces
Mild steel TMT bars 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia securing with clips.
TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length beent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Material and labour for RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in slab supported on wall or similar work etc complete incl necessary form work all as specified and directed.
Material and labour for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete wall surfaces & finishing the surfaces fair and even.
Material and labour for preparation new plastered wall surfaces and applying three coat of white washing
Material and labour for broken stone hard core gauge n.exc 63mm deposited, spred and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces.
Material and labour for 75 mm thick PCC type C2 1:3:6 (usign 40 mm gradded stone aggregate) finishing the surfaces even and smooth without using extra cement.
Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point.
Supply and fixing for 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as spepcified including S&F ball valves high pressure of PTMT with epoxy coated aluminium rod suitable for 20 mm bore pipe with high-density plastic ball screwed for iron pipe and fixed (Minimum weight - 210 gms)
Supply and fixing for 20mm dia bore Steel water tubing medium grade galvanised with all fittings including short lengths, (such as bends, elbows, tee, short peaces, connectors, check nuts, diminishing pieces, caps and plugs, union etc.) complete all as specified and directed.
Supply and fixing for 20mm outer dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed as per requirement of the site
Cutting & screwing existing steel tubing 25mm bore for alterations or additions ( Each cut measured)
Supply and fixing for 25mm dia bore Steel water tubing medium grade galvanised with all fittings including short lengths, (such as bends, elbows, tee, short peaces, connectors, check nuts, diminishing pieces, caps and plugs, union etc.) complete all as specified and directed.
Supply and fixing for 25mm outer dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed as per requirement of the site
EXTENSION OF WEATHER SHELTER
Excavation in post holes (or similar holes) each not exceeding 0.5 Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in any type of soil, in layers not exceeding 25cm, complete all as specified and as directed.
Material and labour for Cement concrete in foundations, filling and mass concrete type B2 1:2:4 ( 40mm graded aggregate)
Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240
Supply and fixing for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
Supply and fixing for Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
Material and labour for MS work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410- W (Gde- E-250) quality-B, all as specified and directed.
Supply and fixing for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe-410-W (Gde-E-250) quality A, complete all as specified and directed.
Material and labour for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (any tint) over a coat of red oxide primer.Complete all as specified and directed .
NEW SHED
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, in any type of soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,
Material and labour for Cement concrete in foundations, filling and mass concrete type B2 1:2:4 ( 40mm graded aggregate)
Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240
Supply and fixing for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
Supply and fixing for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws as specified and directed.
Supply and fixing for 1mm thick Mild steel, plain, black sheet as in eve board
Material and labour for MS work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410- W (Gde- E-250) quality-B, all as specified and directed.
Material and labour for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (any tint) over a coat of red oxide primer.Complete all as specified and directed .
Supply and fixing for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe-410-W (Gde-E-250) quality A, complete all as specified and directed.
Supply and fixing for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long & diametre 16 to 20mm, all as specified and directed.
Surface excavation n exc 30cm deep and averaging 25 cm deep and getting out in hard/dense soil
Material and labour for broken stone ror boulder Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface
Cement concrete 100mm thick type B- 2, 1:2:4 (40mm graded aggregate)
Material and labour for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;
Material and labour for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point
Material and labour for applying two coats of concrete floor paints an new surface over a coat of primer including preparation of surface complete all as specified and directed.
INTERNAL ELECTRIC SUPPLY
Taking down carefully (copper/aluminum) unsv point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point ,socket point or power point including fixture and fitting such as switches , ceiling roses, pendants , regulators , sockets , light fitting etc. removing material to store for keeping in safe custody or for taking credit( credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of wall/floor or ceiling to match with existing surface and finishing the surfaces as per existing complete all as specified and directed.
Material and labour for Point wiring for one light/fan/Exhausr fan controlled by one switch on Independent board with 1.5 sqmm PVC insulated and unsheathed fire retardant low smoke and halogen(FR-LSH) copper conductor single core multi stranded copper cable confirming to IS:694(2010) using approved colour code for phase and neutral as per IS code drawn through non metallic PVC rigid concealed conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0 mm thick and minimum 20 mm external dia but shall be increased as per actual site requirement in accordance with clause No 19.125 of SI Part I ( ISI marked) including conduit accessories like bends, tees, junction boxes etc with all accessories suitable for modular/conventional type fitment,provision for fixing of modular flush boxes of appropriate size and dimensions for fixing of piano switches/sockets/regulator etc including PVC insulated and unsheathed FRLSH 1.5 sqmm multi stranded copper conductor cable (green color) as continous earth lead wire connected to common earth and earth dolly complete all as specified and directed by Engr-in-Charge. Note: (i) For concealed point wiring cutting chases for conduit shall be measured and paid seperately (ii) For sinking boxes cutting chases for conduit shall be measured and paid seperately
Description all as per item No 01 above bit for One bell /Buzzer point controlled by one bell push 5 amp on the same board with other switches or independent
Description all as per ser item No 01 but for 05 amp socket outlets point controlled by one switch on Independent board complete all as specified and directed.
Description all as per ser item No 01 but for 05 amp socket outlets point controlled by one switch on same board with other switches complete all as specified and directed.
Material and labour for modular switch 1 way 6 Amp,230 volts ,1 Module complete all as specified and as directed by Engr-in-charge.
M & L for modular switch 2 way 6 Amp,230 volts, 1 Module complete all as specified and as directed by Engr-in-charge.
Material and labourfor Modular Switch 1 way 16/20 Amp,230 volts, 1 Module complete all as specified and as directed by Engr-in-charge.
Material and labour for Modular Socket 6A, 230 volts, 2/3 Pin universal 2 module complete all as specified and as directed by Engr-in-charge.
Material and labour for Modular Socket 16A, 230 volts, 2/3 Pin combined 2 module complete all as specified and as directed by Engr-in-charge.
Material and labour for Modular fan step regulator 100 watt 2 module complete all as specified and as directed by Engr-in-charge.
Material and labour for Modular Bell push 6A, 230 volts, 1 way, 1 Module , complete all as specified and as directed by Engr-in-charge.
Supply and fixing for Ceiling rose, surface bakelite 65 x 50 mm, 3 terminals fixed on PVC Round Block, complete all as specified and directed by Engr-in-Charge.
Supply and fix bell electric AC,230V, single phase ,ding dong type complete all as specified and as directed including connecting complete.
Description all as per ser item No 01 but for 15 amp socket outlets point controlled by one switch on Independent socket outlet using 2.5sqmm PVC insulated and unsheathed fire retardant low smoke and halogen(FR-LSH) copper conductor single core multi stranded copper cable confirming to IS:694(2010) using approved colour code for phase and neutral as per IS code drawn through non metallic PVC rigid surface conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0 mm thick and minimum 20 mm external dia but shall be increased as per actual site requirement in accordance with clause No 19.125 of SI Part I ( ISI marked) including conduit accessories like bends, tees, junction boxes etc fixed concealed with all accessories suitable for modular type fitment,provision for fixing of modular flush boxes of appropriate size and dimensions for fixing of piano switches/sockets/regulator etc including PVC insulated and unsheathed FRLSH 2.5 sqmm multi stranded copper conductor cable (green color) as continous earth lead wire connected to common earth and earth dolly complete all as specified and directed by Engr-in-Charge.
Material and labour for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engr-in-charge.
Description all as per item no.08 above for exc 10 cm but not exc 20 cm girth complete all as specified and directed by Engr-in-charge.
Material and labour for Point wiring for one light/fan/Exhausr fan controlled by one switch on Independent board with 1.5 sqmm PVC insulated and unsheathed fire retardant low smoke and halogen(FR-LSH) copper conductor single core multi stranded copper cable confirming to IS:694(2010) using approved colour code for phase and neutral as per IS code drawn through non metallic PVC rigid concealed conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0 mm thick and minimum 20 mm external dia but shall be increased as per actual site requirement in accordance with clause No 19.125 of SI Part I ( ISI marked) including conduit accessories like bends, tees, junction boxes etc with all accessories suitable for modular/conventional type fitment,provision for fixing of modular flush boxes of appropriate size and dimensions for fixing of piano switches/sockets/regulator etc including PVC insulated and unsheathed FRLSH 1.5 sqmm multi stranded copper conductor cable (green color) as continous earth lead wire connected to common earth and earth dolly complete all as specified and directed by Engr-in-Charge. Note: (i) For concealed point wiring cutting chases for conduit shall be measured and paid seperately (ii) For sinking boxes cutting chases for conduit shall be measured and paid seperately
M & L for module cover plate with frame as per site requirement for following module (a) 3 module
(b) 4 module
(c) 8 module
M & L for Modular metal Flush box as per site requirement. (a) 3 module
(b) 4 module
(c) 6 module
Supply and fixing for energy efficient LED integrated batten type luminaires suitable for wall or ceiling mounting with built in LED Chip & integral LED driver 20 watt,Aluminium channel housing & Polycarbonate diffuser of length 1200 mm (approx.),Color temperature 6500 K or as directed,Luminaire efficacy not less 100 lm/W with all accessories, fixing arrangement internally pre-wired, making all connection using 1.5 sqmm copper conductor multistarnd PVC insulated cable from ceiling rose to fitting drawn through PVC flexible conduit complete fixed in position & connecting complete all as specified and directed by Engr–in-charge.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete making all connection using 1.5 sqmm copper conductor multistarnd PVC insulated cable from ceiling rose to fitting drawn through PVC flexible conduit complete all as specified and directed.
Supply and fixing LED light fitting surface type 600x600mm,35/36 watts, 220 V AC including connecting up with three core flexible copper conductor cable of suitable size complete making all connection using 1.5 sqmm copper conductor multistarnd PVC insulated cable from ceiling rose to fitting drawn through PVC flexible conduit complete all as specified and directed.
Supply and fixing LED Bulk Head type with high out put , 10 watt ,220 V AC,Color temperature 6500 K or as directed,Lumens 1000 lm with all accessories ,IP 65 protection dust and water resistant ,surge protection up to 2.5kV, PC opal high efficiency diffuser ,LM 80 tested made die cast aluminium housing with complete assembly, suitable for surface/wall mounted with driver holder including connecting up using 1.5 sqmm copper conductor multistarnd PVC insulated cable of suitable size complete all as specified and directed.
Material and labour for Disconnecting all water and electric connections of geysers and taking down carefully installed storage type electric geysers of any capacity of any make/type/size (horizontal/vertical) lowering and place at site , examine the parts including preparing inventory for each geyser separately in presence of Engineer-in-Charge and cleaning and de-scaling of deposited material from inner tank, outer tank and heating elements by HCL or aqua clear pedilite solution,checking electrical connection for thermostat and indicator lamp, repair to minor leaking by soldering/brazing of the inner copper tank if noticed and and painting of geyser of any capacity after scraping, cleaning, knotting and stopping including preparation of surface of geyser and rubbing with emery paper for painting with one coat of duco paint by spray painting of approved make first quality and re write MES No. on the body of geyser with black synthetic enamel paint (letters and figures 2cm high ) &reassembling and re-fixing of geyser in its original location including hoisting, connecting to water & electric connection and testing for proper functioning of geysers including earthing to the entire satisfaction of the Engineer-in-Charge
Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.
Material and labour for taking down carefully ceiling fan any type, sweep and make for overhauling including dismantling of blades frame and opening and examining motor cleaning of dust/dirt of fan cleaning and greasing of ball bearing and bushes with fresh oil and best quality of grease respectively and reassembling of complete fan after re-fixing parts complete all as specified and as directed by Engr-in-charge.
Material and labour for Hanging only ceiling fan (M.D. supply) incl replacement of rubber real insulator,split pin,nut,bolt, washer and connecting up including provision of cable 3 core flexible from ceiling rose or connector to fan complete all as specified and as directed.
Material and labour for Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and marking MES No. with black paint complete all as specified and as directed by Engr-in-charge.
Supply and fixing ceiling fan complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with servioce value 6.00 BEE. Five star rated with brushless direct current motor and as directed by Engr-in-charge
Material and labour for taking down carefully Exhaust fan 300mm sweep, or overhauling including dismantling of blades frame and opening and examining motor cleaning of dust/dirt of fan cleaning and greasing of ball bearing and bushes with fresh oil and best quality of grease respectively and reassembling of complete fan after re-fixing parts complete all as specified and as directed by Engr-in-charge. complete all as specified and directed .
Material and labour for Fixing only exhaust fan (M.D.supply) and connecting up including provision of cable 3 core flexible from ceiling rose or connector to fan complete all as specified and as directed.
Supply and fixing of Exhaust fan 300mm sweep, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding, includuing connection 1.5sqmm mutistrand copper conductor fiexible wire from ceiling rose, including oustsied louvers with proper hole, and necessary fixing arrangement and making good to disturbed surface complete all as specified and directed .
Supply and fixing for LED Street Light fitting 35 watt, for opearting voltage between 110V to 320V system efficiency not less than 120 lumen / watt,PF-0.95 minimum, IP66 protection, 5700CCT(K),CRI between 80-85,confirming to LM79 and LM 80 standards or as per IS-16104:2012 and IS-16106:2012,for estimated life span of minimum 50,000 hrs consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with LED street optics LENS for uniform light distribution, weather proof gasket for lamp & driver compartment, Heat resistance toughened UV stabilized glass fitted in cast aluminium housing with SS screws with IP 65/66 protection, complete all as specified and as directed by Engr-in-charge.
Supply & Fixing bracket made out of GI light grade pipe of size 40 mm dia 1.5 mtr long bend to an angle o f120 degree with 02 Nos MS clamp 50 mm x 50 mm and 04 sets of nuts, bolts and washers painting with two coats of synthetic enamel paint over a red oxide primer complete all as specified and directed by Engr-in-charge.
Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size 200 amps bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification
Supply and fixing for epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 8 way SPN suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting as in repair complete all as specified and directed. Make Legrand/ABB/C&S
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissionincomplete all as specified and directed.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and neutral and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissionincomplete all as specified and directed.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and neutral and current carrying capacity 40-63 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.
Material and labour for distribution board (DB), double door type, as per IEC 61439-3 made out of sheet metal enclosure (CRCA sheet) dust and vermin proof MCB DB, TPN 4 way with 200 Amps rated copper busbar, 415 Volts with in built MCCB 80Amps, 16KA, 2 neutral bar and 2 earth bar IP 54 protection,cable ties for cable management(Fully insulated busbar and shrouded neutral bars),reversible door for IP 43 & IP 54 ,flush mounted to wall complete all as specified and directed. Note : Rates are inclusive for flush(Concealed ) mounting of DB and MCCB 80Amp TPN is included under respected items.
Supply and fixing 440V, 25 KA 'B' curve miniature circuit breaker (MCCB) of TPN and current carrying capacity 100 Amp, Complete with connection testing and commissionincomplete all as specified and directed.
Earthing complete with galvanised steel earth plate electode 600 mm x 600 mm x 6.00 mm thick burried directly in ground (earth pit not less than 2.25 meter deep below normal ground level connected to and including galvanised steel earth lead wire 4 mm dia by means of bolts, nuts, chock, nuts and washers of galvanised iron or steel including PCC Pit in 1:2:4 type B-1 angle iron frame with RCC cover and handle, excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore upto main board complete all as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected to main control board as specified and testing completion complete all as specified and directed. Note: (i) The unit rate includes GI pipe up to 7.5m for protection of earth lead. For any additional length the same shall be adjusted through deviation order. (ii) The unit rate includes main earthing lead/strip from earth electrode to test point up to 7.5 meter (iii) In case measured value of earth resistance is recorded more than 1.0 ohms then the earthing shall be re done by the contractor without any extra cost to the department.
Material and labour for Sub main wiring using PVC insulated and unsheathed fire retardant low smoke and halogen(FR-LSH) copper conductor single core multi stranded copper cable confirming to IS:694(2010) using approved colour code for phase and neutral as per IS code drawn through non metallic PVC rigid conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0 mm thick and external dia as under but shall be increased as per actual site requirement in accordance with clause No 19.125 of SI Part I ( ISI marked) including conduit accessories like bends, tees, junction boxes etc with all accessories complete all as specified and as directed by Engr-in-charge of the following sizes of cables as under . Using two single core PVC insulated FRLSH cable 4.0 sqmm copper conductor multi stranded ( Phase and neutral) and 4.0 sqmm copper conductor PVC insulated FRLSH cable as earth wire drawing in and including concealed PVC conduit not less than 2.00 mm thick ,25 mm outer dia (ISI marked) with all accessories Note :2 runs of 4.0 sqmm copper cable & 1 run of 4.0 sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit
Using two single core PVC insulated FRLSH cable 6 sqmm copper conductor multi stranded ( Phase and neutral) and 6 sqmm copper conductor PVC insulated FRLSH cable as earth wire drawing in and including concealed PVC conduit not less than 2.00 mm thick ,25 mm outer dia (ISI marked) with all accessories Note :2 runs of 6 sqmm copper cable & 1 run of 6 sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit
INTERNAL ELECTRIFICATION (FLAME PROOF)
Material and labour for flame proof point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable in and including surface, stove enamelled steel conduit medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable of size 1.5 sq mm copper conductor as earth wire to common earth dolly controlled by one flame proof switch Note:- Colour code of wiring should be (for phase -Red, Neutral-black & earth wire green) (a) One light/fan point controlled by one way switch 6 amps 240 volts
Supply and fixing for flame proof rotary type switch with terminal box in LM 6 16 Amps single pole
Supply and fixing for LED light fitting 1x 16 watt flame proof, CMRI certified receommended for gas / vapor group of IIA & IIIB, Zone 1 & 2 and IP-65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures dirive, holders, connector etc. Complet with all accessories perewired and including connectiing up with three core flexible copper conductor cable with suitable size.
Flame Proof MCB DB SPN 240 volts 4 way suitable hazadous area laden with gasses/vapours of group II(a) & II (b) as per IS 2148/1994 10 Amp 240 V AC enclosed as per IP 55 protection as per IS 2147/1962 made out of cast aluminium alloy LM 6 having earthing terminal complete all as specified and directed by Engr-in-charge.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and neutral and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissionincomplete all as specified and directed.
Supply and fixing for flame proof industrial type heavy duty exhuast fan 12" (450 mm) with 0.50 HP motor and speed 1440 rpm, 4000 cfm single phase 240 volts with louvers incl all accessoreis as per manufacturer norms and connection up with electric system and including grounting of holding down bolts and incl PCC 1:2:4 type B-1 block, complete all as specified and directed by Engr-in-charge Make -Sudhir or equivalent approved by GE
Earthing complete with galvanised steel earth plate electrode 600x600x6 mm burried directly in the ground vertically to depth not less than 4.0 mtr below the ground level with the top edge of earth plate, depth not less than 1.5 mtr below the ground level connected to GI earth wire 4.0 mm dia which protected by GI tubing light grade 15mm dia upto test point 20 mm dia watering pipe with funnel & wire mesh, PCC 1:2:4 using 20mm stone aggregates 40 mm thick RCC cover slab (1:2:4) type B-1 using 20mm graded stone aggregates complete all as specified and shown in electrical plate No 3 of SSR Part-I including earth work in any type of soil removal of surplus soil and providing charcol dust & salt layers all around the earth plate upto 15cm all as specified and directed by Engr-in-charge Note- upto 7.5 mtr length of pipe of 20 mm dia and GI wire shall be deemed to be included in unit rate quoted by tenderer.
AIR CONDITIONING
Supply,installation,testing and commissioning (hot and cold reverse cycle) split Air Conditioner of capacity 2.0 TR (smart cooling with energy saving)Complete with plasmatron cyclotron filter,virus and energy filter,triple filter,anti bacterial filter fitterd with rotary compressor suitable for operation with NON CFC Refrigerant 410A suitable for operation on 220-240 volts single phase 50Hz Ac supply,including comprising on the following: (a) Refrigerant copper tubing for suction and discharge connections the indoor and outdoor units of suitable sizes complete with superior quality insulation duty connected after making of flares and joining with suitable size of flare nuts and saddling to the walls symmetrically as per common engineering practice. (b) Providing of electric connection between outdoor and indoor units with suitable size of electric cables provided by the manufacturer along with the units (c) Remote assembly complete with suitable size and capacity of batteries(cells). (d) Drilling of suitable size of hole into wall for passing of copper tubing (suction and discharge).Connecting wires flexible drain pipe including making good the disturb surfaces to match the existing surfaces. complete all as specified and directed by Engr-in-charge
Supply and fixing voltage stabilizer for automaic operation sigle phase naturally air cooled indoor type & designed for input variation between 170v to 250 volt with output voltage stabilized at 230 volts with accuracy of + 2.5% of and of capacity 5.0 KVA complete all as specified and directed by Engr-in Charge
Supply and fix outdoor unit mounting brackets Factory made heavy duty madeout of MS sheet bent to shape duly slotted for adjustment duly painted withsynthetic enamel paint over a coat of red oxide primer complete with s/sdash/hole fastener's of adequate length for fixing the bracket to wall formounting of Out Door unit complete all as specified and directed (Set of Two)
Material and labour for fabricating and fixing of a icerain protection covershed for outdoor unit made out of MS equal angle frame work of size 50cmx120cm made out of 25x25x5 mm angle 5 cm height in front of 15 cm height inback side with one supporting member in centre of the frame with heavy dutyacrylio sheet of suitable size and thickness complete with Gl hooks/nuts andgrouted into the wall and making good the disturbed surface including paintingthe MS work with synthetic enamel [paint over a coat of red oxide primer all asspecified and directed.
LIGHTING PROTECTION
Supply and fixing for Advanced Lightning protection device having advance triggering time of 63 microseconds, (79mtr radius protection, LEVEL-I) including 1m GI Mast, LA Insulator, Mounting accessories, Lightning counter 6 digits IP 67
Earth continuity conductor or main earth lead fixed to walls or recesses in chassis or buried in ground or drawn in conduit pipe or any indicating situation using 70 sq. mm flexible copper cable for connecting LA with earthing, As per IS 694 complete all as specified and directed.
Earthing complete with copper earth plate electrode of size (600 x 600 x 3.15) mm thick buried directly into ground vertically to depth not less than 4.0 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to copper strip of size 20 x 3 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3, strip protected by dia 40 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including from work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result all as specified and directed.
Supply and fixing PVC epoxy insulator complete all as specified and directed
ROAD/PATH
Demolition of stone slabs and tiles of any description or thickness in floors etc laid, bedded and pointed in any mortar, all as specified and directed.
Material and labour for screed bed or bedding layers of 15 mm thick for laying floors in CM 1:4 complete all as specified and directed.
Material and labour for coloured rubber moulded glossy finish Chequerred cement concrete tiles30cm x 30cm x 25mm thick set and jointed in neat cement slurry with grey cement and pigment in floors complete all as specified and directed.
Material and labour for for cement concrete type B-0 1:2:4 (using 12.5mm graded aggregates), as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, ,kerb,bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.
Demolition of cement concrete (unreinforced) in ground floor and in paving n exc 15 cm thickness (below or above ground level), complete all as specified and directed.
Material and labour for 75 mm PCC 1:4:8 type D-2 (40mm graded agg) as in sub base, all as specified and directed.
Material and labour for 25 mm thick sand cushioning for laying interlocking tiles, complete all as spcified and directed.
Material and labour for machine pressed rubber moulded precast concrete interlocking paver blocks any shape and size of any pattern conforming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigments, complete all as specified and directed.
EXTERNAL WATER SUPPLY
Excavation in trenches in soft loose soil n.exc 1.5 mtr wide & n.exc 1.5mtr in depth and n. exc. 10sqm on plan for laying pipe in trenches and getting out complete all as specified and directed.
Returning filling in trenches, spreading, levelling, watering and well ramming in layers n.exc 25cm in hard dense soil complete all as specified and directed.
Removing of surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above starting point complete all as specified and directed.
Taking out unserviceable/defective/damaged/blockage GI pipe 25mm bore steel water tubing,sorting out serviceable pipe fitting for reuse and cleaning the pipe including fitting and removing away all unserviceable pipe from site, complete all as specified and as directed. (Note: Exacavation and earhwork shall be measured and paid for separately.)
Taking out unserviceable/defective/damaged/blockage GI pipe 50mm bore steel water tubing,sorting out serviceable pipe fitting for reuse and cleaning the pipe including fitting and removing away all unserviceable pipe from site, complete all as specified and as directed. (Note: Exacavation and earhwork shall be measured and paid for separately.)
Supply and fixing for GI tubing medium grade, ISI Marked conforming to IS 1239 Part-I 2004, 25mm bore with and including all fittings such as bends , elbows,tees, short length , socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc including testing complete all as specified and as directed.
Supply and fixing for GI tubing medium grade, ISI Marked conforming to IS 1239 Part-I 2004, 50mm bore with and including all fittings such as bends , elbows,tees, short length , socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc including testing complete all as specified and as directed.
Refixing only serviceable 25mm bore steel water tubing and including new fitting conforming to IS 1239 Part-II: 2011 such as bends , elbows,tees, short length , socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc including testing complete all as specified and as directed .(Old serviceable pipe obtained from taking down shall be used)
Refixing only serviceable 50mm bore steel water tubing and including new fitting conforming to IS 1239 Part-II: 2011 such as bends , elbows,tees, short length , socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc including testing complete all as specified and as directed .(Old serviceable pipe obtained from taking down shall be used)
Cutting of existing cast iron pipe in position for insertion of new tees, branches etc for 100mm CI/GI pipe complete all as specified and as directed.
Supply and fixing for gun metal/bronze gate valve for 25mm bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778: 1984, complete all as specified and directed.
Supply and fixing for gun metal/bronze gate valve for 50mm bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778: 1984, complete all as specified and directed.
Material and labour for provn of new valve chamber including necessary earth work in any type of soil, PCC 1:3:6 in bed concrete, brick work in CM 1:6 with 10 mm thick plaster internally & 15 mm thick externally in CM 1:4 , 3mm thick MS cover with hinges and locking arrangement fixed to angle iron frame made out of 50mmX50mmX6mm MS angle complete with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on all metal works and applying two coats of white wash on all plastered surfaces all as directed by Engineer-in-Charge of size 450 X 450 X 450 MM
EXTERNAL ELECTRIC SUPPLY
Material and labour for taking out old unsv LT cable of various sizes 16 sqmm 4 core/ 240 Sqmm 3.5 core and placed at site for replacement complete all as specified and as directed.
Material and labour for taking out old unsv LT panel / Bus bar and all connected items and placed at site for replacement complete all as specified and as directed.
Material and labour for Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep and getting it out in soft/loose soil including forming bottom surface to required level for laying of cables/pipes/poles complete all as specified and as ditrected.
Material and labourfor returning filling in including spreading leveling watering and well ramming in layers not exc 25 cm deep as in soil complete as specified
Material and labour for removing the excavated material n.exc 50M to a distance and depositing where directed at a level n.exc 1.5 M above the starting point.
Material and labour for sand cushioning to underground cable with dry sand locally available 8cm thick before laying of the cable and 15cm thick after laying and strectching the cable below the bricks/PCC cover, punning of sand using suitable T&P as per site condition, complete all as specified and as directed by Engr-in-Charge. Note : Punned thickness of sand to be consider for measurement purpose.
Supply and laying for un-reinforced pre cast concrete cable cover confirming to IS:5820 with minimum average breaking load capacity 200 kgs for unreinforced covers , class LV Type 1, flat, size 250mm x 150mm x 40mm complete all as specified and directed by Engr-in-Charge.
Supply and laying for GI pipe light grade 40 mm dia as protection to cable along the pole / across road crossing/through culvert/passing through ceiling/walls with necessary clamps-02 nos(Flat iron 50x6mm) with ,nuts and bolts for fixing on pole complete all as specified and as directed.
Supply and laying for GI pipe light grade 100 mm dia as protection to cable along the pole / across road crossing/through culvert/passing through ceiling/walls with necessary clamps-02 nos(Flat iron 50x6mm) with ,nuts and bolts for fixing on pole complete all as specified and as directed.
Supply,laying,jointing and testing, fixing to wall using clamps/pole/floor or in air or passing through pipes/ducts/road/path/drain, laid in trenches, 1100 volts grade heavy duty electric cable XLPE insulated,screened ,PVC bedded, galvanised steel wire or wire armoured with electric power cable 1100 volts grade with stranded aluminium conductor of size 3.5 core 240 sqmm confirming to IS - 7098 Part-1 and its latest amendments complete all as specified and as directed by Engr-in-Charge.
Supply,laying,jointing and testing, fixing to wall using clamps/pole/floor or in air or passing through pipes/ducts/road/path/drain, laid in trenches, 1100 volts grade heavy duty electric cable XLPE insulated,screened ,PVC bedded, galvanised steel wire or wire armoured with electric power cable 1100 volts grade with stranded aluminium conductor of size 3.5 core 25sqmm confirming to IS - 7098 Part-1 and its latest amendments complete all as specified and as directed by Engr-in-Charge.
LT bus bar / Feeder pillar board kiosk type,LT (415 Volts, 50 Hz, 3 Phase, 4 wire supply) floor mounted, factory assembled, outdoor type weather and vermin proof (Protection class IP-54) made out and 3.15mm thick MS sheet CRCA sheet aluminium perforated bus bar of 200 Amps capacity suitable for 3 outgoings with hinged opening, rubber lining , locking arrangement, painted externally and internally with two coats of synthetic enemel gray paint first quality ovar a coat of red oxide primer and PCC and mounting arrangement complete all as specified and as directed.
SEWAGE DISPOSAL
Excavation in trenches not exceeding 1.5 metres wide and not exc 1.5 metres deep in soft/loose soil and getting out, all as specified and directed.
Supply and laying for 150mm internal dia salt glazed stoneware drain pipes laid in trenches and jointed specified including testing all as specified and directed.
Material and labour for cement concrete 1:3:6 type C-2, as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore of pipes, complete all as specified and directed.
Material and labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate), as in foundations, filling and mass concrete complete all as specified and directed.
Material and labour for brick work with sub class 'B' Bricks (using old size bricks) straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified and as directed.
Material and labour for 15mm thick cement plaster in cement mortar 1:4 on fair faces of brick work finished even and smooth without using extra cement, complete all as specified and directed.
Supply only integral water proofing compoud all as specified.
Material and labour for cement concrete type B1, 1:2:4 (using 20mm graded aggregate), in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, all as directed.
Material and labour for Extra for forming fair finished drain or channel 15cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.
Returning filling in soft/loose soil including spreading, leveling watering and well ramming in layers not exc 25 cm thick all as specified and directed.
Removal of excavated soils from site to in difence land a distance exceeding 250 meters but n exc 500m and depositing where directed at a level not exceeding 1.5 meters anove the starting point, all as specified and directed.
Material and labour for pre-cast reinforced cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregates), as in cover slab for man holes, set in CM (1:4) etc includimg necessary form work, complete all as specified and directed.
Material and labour for steel TMT bars, 6 to 8 mm dia, cut to length, bent tp shape required including cranking, bending spirally for hooping for columnm, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Supply installation,testing & commissioning HDPE septic tank for 16 users of size 2000 mm dia and 2250 mm height,with 115 mm dia inlet pipe and supply & fix 160 mm dia PVC (SWR) pipe of length 2 m for connecting septic tank to soakage Pit & 50 mm dia vent pipe,fixed in position and connection with inlet ,outlet & vent pipe as per manufacturer instruction complete all as specified and directed by Engr-in-Charge. Make:- Sintex Model No. CCST-500-01 or equivalent model No of make Comfert polymers,or make approved by GE.
Construction of soakage well including excavation in any type of soil, PCC in foundation, walls in honey combed masonry with top ring concrete including intercepting chamber & screen chamber made of brick masonry in cement mortar, RCC top cover and filled with brick bats of size 2.40m dia and 3.00m depth, complete all as specified and shown on drawings.
AREA DRAINAGE
Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified and directed.
Material and labour for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in bed of drain complete all as specified and directed.
Material and labour for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, all as specified and directed.
Material and labour for Rendering 15mm thick CM 1:4 on fair faces of brickwork or stone masonary /concrete surfaces finished even and fair w/o using extra cement complete all as specified as directed by Engineer-in-charge.
Material and labour for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in benching, coping etc and the like including necessary form work if any complete all as specified and directed.
Supply and fixing for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors etc.and similar work framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc conforming to Fe.290.Gde-E-165 complete all as specified and directed,
Material and labour for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, all as specified and directed.
Removing surplus excavated spoil to a distance not exc. 50m and depositing where directed at a level not exc 1.5m above the starting point, complete all as specified and directed.
Rturning,filling in ,including spreading,levelling,watering and well ramming in layers not exc 25 cm in hard /dense soil
M/S BASHIR AHMAD TANTARY
M/S RATHER CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .