PROVN OF CERTAIN MW AND REV WORKS AND DEPOSIT WORK AT OLD CANTT PRAYAGRAJ

Amount

Excavation in trenches in soft/loose soil not exceeding 1.5 M wide and not exceeding 1.5 Mtr deep and getting out complete all as specified and directed.

M&L for Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft loose soil complete all as specified and diretced.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

M&L for brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1: 6 complete all as specified and as directed.

M&L for brick work with old size fly ash bricks straight or curved on plan to any radius half brick thick wall built in CM (1:4) complete all as specified and as directed.

Returning filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft soil complete all as specified and directed.

Removing excavated surplus soil not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.

M&L for sand filling under the floor/ foundation including watering, ramming and consolidation complete or sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand up to 18 cm thick and consolidation complete all as specified and directed. Note : Punned thickness i.e 18 cm shall only be measured for payment purpose.

M&L for Hard core of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and diretced.

M&L for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in levelling course complete all as specified and directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:4) complete all as specified and as directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450mm X 300mm X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick plaster in cement mortar (1:4) complete all as specified and directed.

M&L for Reinforced cement concrete (design mix) M-25, (using 20 mm graded stone aggregate) slabs supported on walls, beams, and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like in similar RCC work incl necessary formwork complete all as specified and directed. NOTE: Reinforcement to be measured and paid separately under respective item here-in-after.

M&L for mild steel TMT bars 10 mm dia and over in reinforcement cut to length bent to shape required incl cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantcomplete and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as per direction of Engineer- In- Charge.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F 150mm Aluminium handles, cast type, anodised of pattern/design as approved by GE/sample kept in GE's office complete all as specified and directed.

S&F 200mm(bolt length) Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

Contd/... Note :- (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. (ii) Net opening will be measured for payment purpose.

Supply only 4.8 mm thick frosted sheet glass ordinary quality (area of each pane not exc 0.5 Sqm) complete all as specified and directed.

M&L for rendering 5 mm thick on concrete surface in ceiling in CM 1:3 complete all as specified and as directed.

M&l for two coat of white wash on new plastered surface of ceiling including preparation of surface complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) complete all as specified and as directed.

M&L for preparing new plastered surfaces of walls and applying two coats of Oil bound distemper (smooth wall finish) in approved colour/shade over a coat of primer over 2 mm thick wall care putty complete all as specified and directed .

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4, mixed with liquid water proofing compound @ 200ml/50Kg cement complete all as specified and as directed. NOTE: Liquid water proofing compound shall be measured and paid separately under respective item here-in-under.

Supply only Liquid water proofing compound complete all as specified and as directed.

M&L for Preparing of new plastered or unplastered surfaces of walls and applying two coats of cement base paint in approved colour/shade over a coat of primer complete all as specified and directed.

M&L for Cutting chases pinning in brick walls, making good to facing where required and pointing in CM 1:3 to ends or edges of landing , steps, cills, sunshades, shelves lintels etc. and cutting chases for concealed for water tubing or concealed conduit wiring etc and making good, cutting n.exc 10cm girth complete all as specified & directed.

S&F GI tubes 15mm bore medium grade with all fittings fixed to walls and ceilings or laid in floor complete all as specified & directed

S&F 20mm bore GI tubing medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed.

S&F rotational moulded HDPE water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (minimum weight 210gms) complete all as specified and directed.

S&F 20 mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed

S&F european type combination pattern water closet (casket type christina) with mounted flushing cistern incl seat cover and pvc connection complete all as specified and as directed. Make: Jaquar CONTINENTAL SERIES or equivalent

S&F brass chromium plated 2 way bib cock with wall flange 15 mm dia including fixing to pipe complete all as specified and directed Make: Jaquar CONTINENTAL SERIES. or equivalent

S&F health foucet with 1200mm long flexible mild steel tube 80mm dia with wall hook complete all as specified and as directed. Make: Jaquar ALLIED SERIES or equivalent

S&F 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed. MAKE:Jaquar CONTINENTAL SERIES. or equivalent

S&F 15 mm dia stop valves cast copper alloy chromium plated long shank(concealed type), screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed

S&F 15mm bore CP brass bib cock screwed for iron pipe or ferrule and fixed complete all as specified and directed MAKE:Jaquar CONTINENTAL SERIES. or equivalent

S&F table top wash hand basin of size 600mm X 445mm X 150mm including waste coupling complete all as specified and directed. Make : Jaquar Model KUS-WHT-35933PM or equivalent .

S& F 15 mm bore central hole basin mixer with 450 mm braided connection pipe (witout popup)complete all as specified and directed. MAKE:Jaquar CONTINENTAL SERIES or equivalent

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent complete all as specified and as directed.

S&F Salt glazed stoneware gully traps of size 150 mm x 100 mm, square or round mouthed, type ‘P’ including setting and jointing in cement mortar 1:1 complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. Make: Jaquar CONTINENTAL SERIES. or equivalent

S&F toilet paper holder fixed to wall with chromium plated brass screws complete all as specified and directed. Make : Jaquar Continental series ( CAN-CHR-1151N) or equivalent.

S&F brass chromium plated Tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges including brackets fixed to wall complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and as directed.

S&F 75mm PVC (SWR) bends any radius complete all as specified and as directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and as directed.

Supply, laying, jointing and testing in trenches DWCPE pipe (SN 8) of nominal size 163 (ID)/180 (OD) dia as per IS-16098 (Part-2): 2013 upto a depth of 1.65 m required to make sewer line functional complete all as specified and as directed. Note:- Excavation and earthwork incl returning filling shall be measured and paid seperately under respective item of BoQ.

M&L for providing precast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and as directed. NOTE: Reinforcement shall be measured and paid separately under respective item.

M&L for mild steel TMT bars 6 mm to 8mm dia cut to length bent to shape required incl cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for 20 mm granite slab work (in single full length) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, suspended slab and like in 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc for pipes upto dia 200mm complete all as specified and directed.

S&F 25mm bore GI tubing medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed.

S&F 25 mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed

S&F Ball brass valve with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed for pipe of dia 25mm complete all as specified and directed.

M&L for drilling and tapping existing CI/DI/GI water mains (in position) for branch connection of any dia complete all as specified and directed.

Supplying and laying CPVC pipe of dia 16 mm SDR 11 and plain CPVC SDR 11 fittings in trenches complete all as specified and directed. Note: Excavation and earthwork shall be measured and paid seperately.

M&L for point wiring for one light point/ fan point with 1.5 sq.mm FRLS PVC sheathed/insulated multi stranded 1100 volts grade copper conductor cable in PVC conduit complete all as specified and directed. NOTE:- (i) PVC conduit shall be of 20mm dia (min), medium class and with it's all accessories. (ii) Terminal box shall sunken type and suitable forswitch/sockets of appropriate modules. (iii) Sheet and cover of suitable modules shall be provided (iv) Proper colour code shall be followed for Phase, earth and neutral wire. (v) Cutting chases in wall (in case of concealed or resseced type point wiring), if required, shall be measured and paid separately under respective item here-in-after. (vi) Point wiring shall strictly as per relevant code. (v) Rates of all material required/mentioned above shall deemed included in quoted unit rate except switches, sockets, fan regulators, ceiling rose, lamp holders etc.

All as per Srl item No. 68 above but in PVC casing caping of size 20 mm wide complete all as specifed and directed.

All as per Srl Item No. 68 above but in existing PVC/steel conduit of any dia complete all as specified and directed.

All as per item No 68 above but with 2.5 sqmm cable for one 5/6 Amp socket outlet point on independent board .

All as per item No 68 above but with 4.0 sqmm cable for one 15/16 Amp socket outlet point independently (for Geyser & AC) controlled by one earth plug and socket box in lieu of sunken box, moduler plate and cover.(Except sunken box, moduler plate and cover) Note: Earth plug and socket box shall be measured and paid seperatly.

S&F switch flush type, single pole, one way, 5/6 Amps 230 Volts complete all as specified and directed.

S&F socket outlet, flush type, suitable for 5/6 Amp, 2 module complete all as specified and directed.

S&F switch piano , flush type 15/16 amps, single pole, one way complete all as specified and directed.

S&F socket flush type suitable for 15/16 A, 5/6 pin, 2 module complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface Bakelite sheet 63.50mm dia complete all as specified and directed.

S&F LED tube light fittings, 20 watt fixed to wall, complete all as specified and directed.

S&F LED Mirror light fitting, 10Watt, 2 feet long including LED lamp and making connection complete all as specified and directed.

S&F exhaust fan heavy duty, steel body with steel blads, 300mm sweep, single phase 240 volt including louvers and making electrical connection and writing MES No with black paint complete all as specified and directed. Note :- Rate shall be inclusive of proper fixing to wall and making hole on wall as per site requirement and making good thereafter complete.

S&F 300mm sweep exhaust fan made of sturdy engineering plastic complete with louvers shutter, 230V, 50Hz, RPM 1200, Copper winding complete all as specified and directed . Note :- Rate shall be inclusive of proper fixing to wall and making hole on wall as per site requirement and making good thereafter complete.

Supply, installation, testing and commissioning of Split type air conditioner unit 1.5 Ton capacity (indoor and outdoor) having digital inverter rotary type compressor (single phase unit both), 220V-240V, 50Hz, 5 star rating and EER 3.2 with cordless remote control, complete all as specified and directed. Note: Cost of copper tube of required distance and stand for outdoor unit deemed to be included in quoted unit rate.

Supply and fix automatic Voltage stablizer wall mounted, copper wound, naturally cooled, indoor type, automatic boost/buck for low and high voltage correction equipped with electronic circuit, relays of single phase 50Hz AC supply, complete designed for input variaton Voltage of 130 to 280 volts and output voltage stablized at 230V with aacuracy of + 2.5% TDR to 3mm + 20 second of capacity 4 KVA capacity complete all as specified and directed.

M&L for Sub main wiring with two single core PVC insulated unsheathed, grade cable 6.0 sq.mm (nominal area) FRLS type multi stranded copper conductor and one run of 6 sq.mm nominal cross sectional area FRLS PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire connected to common earth as per IS including provision of cutting chases for conduit and sinking for boxes including making good to walls disturbed surfaces and applying finishes to match existing surfaces and laying through and including provision of 20mm dia 'medium grade' PVC conduit and fittings, complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, one run of 6 sq.mm copper earth continuity conductor and one run of PVC conduit and its fittings shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

M&L for Sub main wiring with two single core PVC insulated unsheathed, grade cable 4.0 sq.mm (nominal area) FRLS type multi stranded copper conductor and one run of 4 sq.mm nominal cross sectional area FRLS PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire connected to common earth as per IS including provision of cutting chases for conduit and sinking for boxes including making good to walls disturbed surfaces and applying finishes to match existing surfaces and laying through and including provision of 20mm dia 'medium grade' PVC conduit and fittings, complete all as specified and directed. NOTE:- (i) Two runs of 4 sq.mm copper conductor, one run of 4 sq.mm copper earth continuity conductor and one run of PVC conduit and its fittings shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

M&L for Sub main wiring with two single core PVC insulated unsheathed, grade cable 2.5 sq.mm (nominal area) FRLS type multi stranded copper conductor and one run of 2.5 sq.mm nominal cross sectional area FRLS PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire connected to common earth as per IS including provision of cutting chases for conduit and sinking for boxes including making good to walls disturbed surfaces and applying finishes to match existing surfaces and laying through and including provision of 20mm dia 'medium grade' PVC conduit and fittings, complete all as specified and directed. NOTE:- (i) Two runs of 2.5 sq.mm copper conductor, one run of 2.5 sq.mm copper earth continuity conductor and one run of PVC conduit and its fittings shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

S&F TPN DB double door 4 way 415 V including busbar and other accessories without MCB complete all as specified and directed.

S&F MCB, TPN, AC, 415 volts of 100Amps capacity 10KA, 'C' series including making connections with suitable size of copper lugs complete all as specified and directed.

S&F MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'C' series including making connections with suitable size of copper lugs complete all as specified & directed.

S&F MCB , SPN, AC, 240 volts of 32 Amps capacity 10KA, 'C' series including making connections with suitable size of copper lugs complete all as specified & directed.

S&F MCB , SPN, AC, 240 volts of 63 Amps capacity 10KA, 'C' series including making connections with suitable size of copper lugs complete all as specified & directed.

S&F two pin and earth plug and socket with one MCB single pole 6 to 32 amps 'C' series 10KA in sheet metal enclosure and connecting complete all as specified and directed.

S&F sheet metal enclosure/Distribution board for MCBs, double door type, epoxy powder coated, factory made, Triple Pole and Neutral (SPN), 8 way 240Volts with 200 Amps rated bus bar, with enclosure blank plates for unused way complete all as specified and directed.

S&F sheet metal enclosure/Distribution board for MCBs, double door type, epoxy powder coated, factory made, Single Pole and Neutral (SPN), 4 way 240Volts with 200 Amps rated bus bar, with enclosure blank plates for unused way complete all as specified and directed.

Supply, laying and testing (in replacement) 1.1_KV XLPE insulated PVC sheathed armoured Aluminium LT cable with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified and directed.

Supply, laying and testing (in replacement) 1.1_KV XLPE insulated PVC sheathed armoured Aluminium LT cable with stranded aluminium conductor of size 6 sq mm 2 core complete all as specified and directed.

Supply and laying dry well burnt locally available brick sub class 'B' old size bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as specified and directed.

S&F for 50 mm dia GI pipe 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing/hard standing complete all as specified and directed. NOTE : Excavation and earth work shall be measured & paid separately.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL with top edge of plate not less than 1.50 m below GL) connected with GI wire 4.0 mm dia as earthing lead by means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, GI pipe (ISImark) light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate ) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover 1:2:4 , type B-1(using 20 mm graded crushed stone aggregate ) reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade(ISI marked) for watering all as shown in electrical plate No 3 of SSR Part-I and connected to earth test point including testing including dismantling of old ineffective earthing complete all as specified and directed. (Note:- The rates quoted shall also deemed to include the cost of Earth test point and earth strip and protection pipe upto 7.5 meter beyond the earth plates electrode)

Supply and fixing electric water heater storage type made up of stainless steel body and heating element upto 2 KW , capacity 25 litres , BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, PVC connection etc. complete all as specified and directed.

Supply, installation, testing and commissioning of Deep freezer, 300 ltrs capacity having single door, hard top, 4/5 star rated complete all as specified and directed.

Supply, installation, testing and commissioning of water cooler, electric driven (single phase) having approximate storage capacity of 80 litre and nominal cooling capacity of 60 litrs per hour, 4/5 star rated complete all as specified and directed.

Supply, installation, testing and commissioning of convertible type refrigerator, double door, 320 Ltrs capacity, BEE 4/5 star rated complete all as specified and directed.

Supply and installation of wall mounted heavy duty air circulator fans, industrial type, 600 mm sweep, 240V, automatic rotation with air delivery not less than 245 cub mtr/min having 1440 RPM including making neccesary connection with suitable size copper wire complete all as specified and directed.

Supply and fixing 150 Watt highbay LED light, new generatiuon, aluminium PDC housing and toughned glass to ensure IP66, luminous efficacy not less than 100lm/W with discreet high lumen LED complete including making necessary connection with suitable size copper wire complete all as specified and directed.

Supply, installation, testing and commissioning of commercial type electric chimney for cook house kitchen with hood made up of SS 304 grade steel, SS grease filters and grills dimension of chimney 12x3 feet or different independent size connected to common duct as per site requirement with 3 HP suction motor and blower single phase 240V, 1500 RPM, foot mounted frame for installation of blower motor incl duct made up of GI with min thickness 0.8 mm, cross section and length are as per manufacturer's design and drawing including all electrical connections/ wiring / wall cutting and repair to match existing surface alongwith all other fittings and fixtures to make it functional complete all as specified and directed. Note :- Manufacturer design and drawing of chimney shall be approved by Accepting officer before execution of the work.

Supply and fixing desert cooler metal body, electric driven (single phase), having nominal air flow capacity of 5000 CuM per hour or nearest size with fan motor of 450 mm sweep incl stand made up of GI pipe or angle iron complete all as specified and directed. Make : Orient Cart Part No- OD7004H or equivalent in Havells/Crompton/Symphony.

S&F BLDC ceiling fan, 1200 mm sweep, BEE 5 star rated, 230 V, 50 Hz, single phase AC supply with remote unit for speed control and all remaining accessories complete all as specified and directed.

Supply and fixing wall fan, 400 mm sweep with blades, AC single phase, 230 V incl necessary fixing on wall complete all as specified and directed.

M&L for Carryingout boring , sampling, testing & conducting standard penetration test (SPT) test as part of soil investigation to ascertain soil profile & bearing capacity of soil for deplth upto 10 mtr below ground level complete as specifed and directed by engineer in charge. Note :- Standard penetration test shall be conducted as per relevent/latest IS code and as per procedure/guideline specified in Appendix - 'F' to particular specifications.

Ditto all as per Item No. 110 but for boring depth upto 30mtr

NEHA INFRASTRUCTURE & COMPANY (BID ID -3452522)

M/S Garg Sons (BID ID -3445370)

Ram Babu Bros (BID ID -3446770)

R K CONSTRUCTION COMPANY (BID ID -3452561)

LOKESH CONSTRUCTION (BID ID -3446841)