8866 SPECIAL REPAIRS TO BLDG NO P-12 AT COD KANDIVALI AND ADDN/ALTN OF AFMSD GUEST ROOM AT COD MALAD UNDER GE NORTH MUMBAI

Amount

B/R Works (AGE B/R Santacruz) Taking down steel/aluminium windows or ventilators with frame & shutter, fixed type with glazing bars exceeding 1.5 sqm but not exceeding 4.0 sqm each (without taking off shutters from the frame) all as specified and as directed.

Taking down steel/aluminium windows or ventilators with frame & shutter, fixed type with glazing bars not exceeding 1.5 sqm each (without taking off shutters from the frame) all as specified and as directed.

Material and labour for 20 to 25 mm thick machine cut, machine polished cudappah stone slabs in jambs and cills of windows, shelves, cooking platform, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including backing coat 10 mm thick in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 15 micron coloured aluminium sections for sliding or openable windows, ventilators, doors, partitions etc including fabrication of frame & shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and as directed by Engineer-in-Charge. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India Note: (i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed.

Supply and fix 4 mm thick figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 sqm each pane complete all as specified and as directed by Engineer-in-Charge Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix in repairs 15 micron coloured aluminium anodised grill of design No DG-101, 10 mm thick, cut to required size/shape, and fixed in position with and including aluminium beading and frame complete all as specified and as directed by Engineer-in-Charge. Make: DECOGRILLE of Associated group or equivalent make as approved by GE

Taking down chowkats or frame with shutters, exceeding 1.5 sqm but not exceeding 4.00 sqm each (without taking off shutters from the frames) including all fittings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engineer-in-Charge

Taking down chowkats or frame with shutters, not exceeding 1.5 sqm each (without taking off shutters from the frames) including all fittings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engineer-in-Charge

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing on Serial Page No 160 of SSR Part II (pertaining to item No 08095) and edges to be painted to match with prelam sheet complete all as specified and as directed by Engineer-in-Charge. Make : M/s Rajshri Plastiwood, Indore / M/s Sintex Industries Ltd / M/s Accucell / M/s Dura Plast Extrusion

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of M. S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing on Serial Page No 156 of SSR Part II (pertaining to item No 08080) complete all as specified and as directed by Engineer-in-Charge. Make : M/s Rajshri Plastiwood, Indore / M/s Sintex Industries Ltd / M/s Accucell / M/s Dura Plast Extrusion

Supply and fix plain solid straight chowkats, second class hardwood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good frame in cement concrete complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 35mm thick factory made plain framed panelled shutter 2nd class hardwood rail and style (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)

Supply and fix mild steel hold fast confirming to Fe 410-S grade E-310-S complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparing surfaces of wood and wood based materials, steel and iron work, treating ends of posts, hold fasts, backs of chowkats, etc., area tarred exceeding 0.1sqm not exceeding 0.5 sqm each and treated with tar or coal tar black paint complete all as specified and as directed by Engineer-in-Charge.

All as per item No 16 described here-in-before but treating small articles such as holdfast areas not exceeding 0.1 sqm each complete all as specified and as directed by Engineer-in-Charge.

Supply and fix butt hinges 100mm size stainless steel type B-21 complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminum anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy 300mm long, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix extruded aluminium alloy handles fabricated types, anodised, of size 150 mm long complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Material and labour for preparation of new or previously untreated wood and wood based surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Demolition of brick work/stone/PCC block masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for brick work with sub class "B" bricks straight or curved on plan exceeding 6 mtr mean radius with old size bricks and built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Material and labour for rendering 10mm thick on internal wall surfaces using factory manufactured pre mix/ready mix plaster of 'Roofit Mix' of M/s Premier Floor to Roof Materials Pvt Ltd/'Easy plast' of M/s Walplast Products Pvt Ltd/'Readiplast' of M/s Ultratech Cement Ltd' / Soundplast PMC-1 of M/s Sound buildcare Pvt Ltd/or other approved equivalent make, having minimum composition of C:S : 1:6 using fully treated dry, well graded natural sand confirming to IS 383 suitable for plastering, having low rebound properties, low water demand for curing properties mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over masonry and concrete surfaces and finishing with sagol finish not less than 1mm thick, including cleaning the surfaces, curing etc complete all as specified & directed by Engineer-in-Charge.

All as per item no.26 but of 5mm rendering of minimum composition of C:S 1:4 on ceiling and finishing surfaces complete all as specified and as directed by Engineer-in-Charge

Material and labour for rendering 15 mm thick cement plaster in CM 1:4, two coats using factory manufactured pre mix/ready mix of 'Roofit Mix' of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd/'Soundplast PMC-1' of M/s Sound buildcare pvt.Ltd/ or other approved equivalent make, having minimum composition of C:S :1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces with base coat of 10 mm thick and finishing coat of 5 mm thick final rendering with water proofing compound @ 3% by weight of cement or as per manufacturer's instructions, including using richer mix for making corners if necessary, at all floors and level, including making grooves of existing size wherever required, including cleaning the surfaces, curing including provide of 150mm chicken wire mesh fixed with nails at the junction of RCC columns/walls/ beams/ lintels and brick masonry at external faces before plastering including scaffolding at any height and all safety materials required for execute work etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for opening out cracks in wall surfaces in 'V' shape by mechanical grinder and removing the loose material. filling with crack filler of Dr. Fixit crack-X, shrink-free or equivalent all as per manufacturer's instructions and finishing the surfaces to match with existing finish complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over 1.5mm wall care putty on wall complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Material and labour for complete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of alkhali resistant primer over 1.5mm wall care putty including preparation complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Material and labour for preparing new plastered surfaces and applying two coats of Acrylic weather proof coat 100 % exterior grade paint over one coat of acrylic primer over a thin layer of wall care putty on wall surfaces complete all as specified and as directed by Engineer-in-Charge and as per manufacturers instructions. Make: Asian Paints / Nerolac Paints /Berger paints / Shalimar Paints

Material and labour for completely removing existing treatment and applying two coats of Acrylic weather proof coat 100 % exterior grade paint over one coat of acrylic primer on wall surfaces complete all as specified and as directed by Engineer-in-Charge and as per manufacturers instructions. Make: Asian Paints / Nerolac Paints /Berger paints / Shalimar Paints

Material and labour for preparing old wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints / Nerolac Paints /Berger paints / Shalimar Paints

Material and labour for preparing old wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints / Nerolac Paints /Berger paints / Shalimar Paints

Material and labour for preparation of old decorated or undecorated surfaces of walls & applying two coats of chemical waterproofing treatment (601 Raincoat of Pidilite or equivalent) on wall & Chajjah, terrace & Parapet wall; including filling of cracks in walls/concrete with "Crack- 'X' of Pidilite or equivalent complete as per manufactures Instructions, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of chalk whiting on wall complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm and removal of rubbish outside MD Land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 75mm thick PCC (1:4:8) type D2, (using 40mm graded stone aggregate) as in sub base, finished even and rough complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 75mm thick Plain Cement Concrete (1:3:6) type C1, nominal mix (using 40mm graded stone aggregate) as in plinth protection & finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in CM (1:6) complete all as specified and as directed by Engineer-in-Charge. Make:M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Nitco tiles

Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in colour cement to match including backing coat 10 mm in CM (1:3) complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Nitco tiles

Material and labour machine cut Kota stone slab flooring 20-25 mm thick over cement screed bed 10 mm in CM (1:4) base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer in Charge.

Material and labour for joint free, coloured glazed ceramic tiles of size 350mm x 250mm x 7 mm thick/ 450mm x 350mm x 7mm , on vertical surfaces etc., set and jointed in neat cement slurry and pointed in coloured cement to match over & including cement plaster 10mm thick in CM (1:4) complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Nitco tiles

Material and labour chequered cement concrete tiles of size 20 cm x 20 cm x 25mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors including screed bed of mortar 15mm thick (1:6) complete all as specified and as directed by Engineer-in-Charge. Make: Mehtab Tiles / National / Bharat Tiles & tech coy / NITCO / Modern tiles and marbles bangalore

Supply and fix in repair vitreous china bowl urinal, flat back, size 465 x 355x 265 mm white (minimum), with grating and urinal for discharge pipe, waste pipe complete including providing and fixing plugs, bedding urinal against wall in CM securing urinal to plugs with and including 60mm long brass screws, pointing around, fixing cistern with brackets, flush pipe grating and union for discharge pipe complete all as specified and as directed by Engineer-in-Charge. Make: Parryware/Cera(Istquality)/Jaguar/Hindware/Johnson

Supply and fix in repairs push cock / lifting cock of 15mm dia, cast copper alloy, chromium plated suitable for water cooler, complete all as specified and as directed by Engineer-in-charge. Make : Jaguar/Soma/ZOLOTO/PRAYAG/Leader

Supply and fix vitreous china squatting pan Orissa pattern of size 580 x 440mm white with integral foot rest, 'P' or 'S' trap front and back inlet and including connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern & flush pipe) all as specified and as directed. Make: Parryware/Cera(Ist quality)/Jaguar/Hindware/Johnson

Supply and fix in repairs PVC valveless, syphonic action type low level flushing cistern 10 ltr capacity white with inlet ball valve, float and handle including brackets and connection to pipes and fixing of chain and pull or lever complete all as specified and as directed by Engineer-in-Charge. Make: Parryware/Cera(Istquality)/Jaguar/Hindware/Johnson

Supply and fix in repair 32mm bore flush pipe of low or high density polythene of required length complete all as specified and as directed by Engineer-in-Charge. Make: Finolex/Prince/Kisan/Supreme/SFMC

Supply and fix in repair cast iron Nahani trap, 100mm dia outlet with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc, complete all as specified and as directed by Engineer-in-Charge. Make : LEADER/NETA/ZOLOTO

Supply and fix in repairs PTMT grating rounded of dia 100mm (minimum weight 25gms) complete all as specified and as directed by Engineer-in-Charge. Make : RS industries (POLYTUF)

Supply and fix in repairs PVC connection 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge. Make : INFRA / PRINCE / SUPREME / ASTRON PLASTIC / Kisan Pipes / Astral

Dismantling of 110mm cast iron/PVC pipe including bends/branch pipe jointed in cement mortar and taking out if required complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repair UPVC (SWR) single socketed rain water/soil waste pipes, type B, with rubber ring joints, 110mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex

Supply and fix in repair UPVC (SWR) single socketed rain water/soil waste pipes, type B, with rubber ring joints, 75mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex

Supply and fix in repair UPVC (SWR) bends any radius, 110 mm bore complete all as specified and as directed by Engineer-in-Charge Make : Prince / Supreme / Finolex

Supply and fix in repair UPVC (SWR) bends any radius, 75 mm bore complete all as specified and as directed by Engineer-in-Charge Make : Prince / Supreme / Finolex

Supply and fix in repair UPVC (SWR) branch piece double Y any radius, 110 mm bore complete all as specified and as directed by Engineer-in-Charge Make : Prince / Supreme / Finolex

Supply and fix in repair UPVC (SWR) branch piece double Y any radius, 75 mm bore complete all as specified and as directed by Engineer-in-Charge Make : Prince / Supreme / Finolex

Supply and fix in repair UPVC (SWR) Vent cowl any radius,110 mm bore complete all as specified and as directed by Engineer-in-Charge Make : Prince / Supreme / Finolex

Material and labour for surface preparation of structural part by gentle chipping by manually to make the surface rough and thoroughly cleaned with air as per standard practice and directions of Engineer-in-charge (including removal of external plaster, wherever exists) costs inclusive of transportation, labour, conveying debris away from the site (max 50m) tools and tackles, lead and lift etc, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix CRS (Corrosion resistant steel), 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. Note:Cutting of rusted reinforcement & welding shall be inclusive in this item of work

Supply and fix CRS (Corrosion resistant steel), 8 to 10mm dia in stirrups, spacers and binder cut to length bent to shape required incl cranking, bending spirally for hooping for columns hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work

Repairing of excessively damaged concrete portion by using superfluid dual shrinkage compacted and providing, casting with microconcrete of grade M-30 at all levels with all leads and lift as directed including mixing, laying, levelling, finishing including curing and formwork of steel or marine ply complete all as specified and directed by Engineer-in-Charge. Note: Grade of Micro-concrete to be M 30 at 28 days and shall be sourced from manufacturer's such as Fosroc / SIKA / BASF / Krishna Conchem or equivalent approved .

Supply and fix MS/TS dowel pins/staple/shear pins including drilling holes in concrete and providing labour and but excludes the materials for grouting the pins.etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for providing and applying rust cleaner (Re-backler solution) to exposed corroded reinforcement @ 0.20 Litre/Sq or approved make over prepared reinforcement, including removing concrete all around reinforcement including from behind the reinforcing bars by manual methods such as hammering the rebar, using wire brushes, chiseling, etc. and applying rust removing solution of approved make with cotton waste swab to reinforcements etc. complete as directed by Engineer-In-Charge.

Material and labour for providing and applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB or equivalent of approved make and quality comprises of resin and hardner mixed in equal proportion by volume with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc. including scaffolding etc complete all as specified and as directed by Engineer-in-Charge. NOTE:- New Reinforcement shall be measured and paid separately under respective item. (b) Cost of welding deemed to be inclusive in this item of work.

Material and labour for providing and applying a priming cum bonding coat of two component Epoxide Resin confoms to ASTM-C-882-91 of approved make and quality to clean and sound concrete area by brush or any other established method by mixing Base and curing agent in 2:1 proportion by weight for joining old and new concrete as per technical specifications of manufacturer. Work shall be carried out as per the manufacturers specifications & certificate on this account shall be taken from consultant and as approved by Engineer-in-charge

Material and labour Drilling and fixing teflon nozzles in RCC members, including drilling holes (drilling 12 mm dia, 40mm deep holes in structural members at the intervals of 600mm c/c in staggered manner or s directed by Engineer-in Charge in RCC structure elements and cleaning the holes (to clean the holes by air blower prior to fixing nozzles) and fixing of nozzles (to insert 12mm dia teflon nozzles in cleaned holes external end of nozzles (to insert 12mm dia teflon nozzles in cleaned holes external end of nozzles to be machined to receive outlet of grouting gun and fixing it inside the holes by applying thixotropic epoxy putty to ensure complete sealing and curing the system for minimum 12 hrs) and cutting of nozzles (to cut the nozzle by chisel after completion of grouting without damaging structural elements etc complete all as specified and as directed by Engineer-in-Charge.

Injecting low viscosity (3-5 cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories, till nozzles refuses to accept the grout, Including, Mixing of materials( Mixing material components (part a & b) in required quantities as per manufacturer’s instruction by weigh batching) and Grouting ( Filling the grouting gun with monomer. Maintain desired pressure in the gun by air compressor; maintain the pressure at exit (4 to 5 Kg/ Cm2) by monitoring pressure gauge at exit. Grouting the material through prefixed nozzles in the structural elements till its refusal. Sealing the nozzle with epoxy putty after the refusal. Monitoring leakages through other nozzles while grouting and seal them as per the requirement. Repeat the process for all the nozzles. the operation to be within pot life of the material.)and Cleaning of gun and accessories ( the gun and accessories like valves, pipes and other fixtures to be cleaned with thinner after the operation to avoid jamming of the gun.) etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for providing and laying 20 mm thick POLYMER MODIFIED MORTER over identified R.C.C. members in One layer in proportion of 1:5:15 by weight of polymer of approved make, cement and filler material of approved make, blended to a required consistency and applying and finishing by floating, curing after initial setting time, including providing and inserting 10 mm mild steel shear key bars (minimum 3 nos per sqm), wherever required, bonding slurry, etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Strengthening structural elements with non metallic composite fiber wrapping system comprise of uni-directional carbon fiber sheet (430 GSM) and compatible saturant Profiling, applying compatible primer on prepared substrate, Filling the holes and uneven surface with thixotropic epoxy putty etc. , complete mechanized wetting of fiber sheet, cutting the fabric to required size, mixing of saturant and filling in tub area of the saturation machine, placing the fiber on metallic rods and pass through the rollers of machine and saturant tub ensuring complete wetting (65% fiber volume fraction) of fibers, removing the fiber on rod and placing the new fiber sheet, wrapping the fiber sheet to structural element at desired orientation using tamping roller to avoid any air voids etc., repeating the same procedure for multiple layer with the interval of 8 hrs ,applying second coat of saturant after minimum 12 hrs after first coat, rectify air voids if any and finally rendering with10mm thick in CM 1:6 including finishing even & smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Mode of measurement- Per sq.mt of surface area of carbon fiber sheet without lapping. Make- FOSROC/FIXIT/Krishna Conchem/ Sika

Providing and fixing carbon fiber anchor including drilling hole in the base concrete, fixing the anchor using epoxy 50X55 system, spreading the anchor fibers in star pattern including appication of saturant complete all as specified and as directed by Engineer-in-Charge. Note for Item No.64 to 76:- (i) The work under Item No. 10 to 15 shall be carried out by authorised applicator only. (ii) Defect liability for these items shall be 5 years from certified date of completion. (iii) Amount of 5% of these items shall be retained during RAR and FB. This amount shall be released after successful completion of Defects liability period as mentioned above.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or taken in sch of credit account complete all as specified and directed by Engineer-in-Charge.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or taken in sch of credit account complete all as specified and directed by Engineer-in-Charge.

Supply and fix GI tubing, medium grade, 15 mm bore with all fittings and connections and fixing to walls including cutting chases in brick walls pinning in and making good disturbed surfaces using with cement mortar 1:3 all as specified and directed. Make:Tata/Swastik/ Prakash/Zenith/Zindal/Swastik

Fixing only old GI tubing & connections of 15 mm bore in new or old positions (walls, ceiling, floors etc) complete all as specified and as directed by Engineer-in-Charge. Note: Serviceable pipes obtained vide Item No. 77 shall be reused.

Supply and fix GI tubing, medium grade, 20 mm bore with all fittings and connections and fixing to walls including cutting chases in brick walls pinning in and making good disturbed surfaces using with cement mortar 1:3 all as specified and directed. Make:Tata/Swastik/ Prakash/Zenith/Zindal/Swastik

Fixing only old GI tubing & connections of 20 mm bore in new or old positions (walls, ceiling, floors etc) complete all as specified and as directed by Engineer-in-Charge. Note: Serviceable pipes obtained vide Item No.78 shall be reused.

Disconnecting of PVC water storage tank of capacity exceeding 250 ltrs and not exceeding 500 ltrs setting aside for repairs Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix rotational moulded polyethylene water storage tanks 500 litres capacity with inlet connections, three layer (cylindrical or vertical with closed top) HDPE with ISI marked, hoisted and fixed in position either inside or out side of the building, connecting up pipes securing access covers etc complete all as specified and directed by Engineer-in-Charge Make : Sintex/Polycon/infra/Rotex

Demolition of cement concrete / cement lime concrete / mud faska (unreinforced in roof and terrace other than ground floor) any description along with existing treatment and removal of rubbish to outside MD land etc complete all as specified and as per directed

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc., applying neat cement slurry @ 3kg of cement per square metre complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 40mm thick (average thickness) PCC (1:2:4), type B1, using 20mm graded stone aggregate as levelling course, laid to slope as required and finishing even & fair without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for 10mm thick rendering with cement mortar 1:3 on roof slab/canopies/chajjas with water proofing compound at 3% weight of the cement as per manufacture instructions and make surfaces to receive water proofing treatment finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note : Water proofing compound will be measured and paid separately

Material and labour preparation of surfaces by removing bitumen based water proofing treatment completely removed by mechanical scarification or by any other effective mechanical means and prepare the normal surface thoroughly by cleaning , washing and removing dust, dirt oil, grease, any loose particles etc and applying one coat of Dr FIXIT prime seal diluted with water in the ratio 2:1 and dry minimum 2-3 hours and apply Dr FIXIT new coat in three coats at the rate 0.50 litre per sqm in each coat and dry 6 to 8 hrs after each coat with and including laying woven glass fibre mesh 2-5 mm x 2.5mm between first coat and second coat complete all as specified and directed by Engineer-in-Charge.

Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit

E/M Works (AGE E/M Santacruz) Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Material and labour for Point wiring complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including non metallic rigid PVC casing / capping (ISI marked, not less than 20mm wide) and accessories on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for the following: Make: Plaza/Finolex/Anchor/Havells/Nicco/Polycab/RPG

One light/fan/bell point controlled by one, one way switch

One 3 pin 5 Amps switch socket point on independent board.

One 3 pin 5 Amps switch socket point on same board controlled by another switch.

All as per item No. 92 described here - in - before but for 3 pin 15 Amps switch socket on independent board with 2.5sqmm copper cable and provision of 2.5sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete.

Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 volts complete all as specified and as directed by Engineer-in-Charge. Make: Larsen & Toubro/ABB/Siemens/Schneider/Havells

Material and labour for Submain wiring complete with and including 2 runs of 4.0sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including PVC conduit, medium grade of size 25mm including accessories such as Tees, Elbows, junction box, reducers etc as required and fixed on walls and 2.5 sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note : Two runs of 4.0 sqmm PVC insulated cable and one run of 2.5 sqmm cable and one run of PVC conduit shall be measured as one unit length. Make: Plaza/Finolex/Anchor/Havells/Nicco/Polycab/RPG

Supply and fix Switch Piano, flush type, single pole, one way, 6 Amps, 240 volts, ISI marked complete all as specified and as directed. Make: Anchor / Legrand / Havells/Crabtree/Leader

Supply and fix Ceiling rose, surface type Bakelite, three terminal 65x32mm, ISI marked complete all as specified and as directed. Make: Anchor / Legrand / Havells/Crabtree/Leader

Supply and fix Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / Havells/Crabtree/Leader

Supply and fix switch socket combination 2 in 1 flush type 5 Amps multipurpose complete all as specified and as directed by Engineer-in-Charge. Make : Anchor/Crabtree/Leader/Legrand/Havells

Supply and fix socket outlet 2 in 1 flush type 5 Amps 3pin complete all as specified and as directed by Engineer-in-Charge. Make : Anchor/Crabtree/Leader/Legrand/Havells

Supply and fix switch socket combination 2 in 1 flush type 15 Amps 3/5 pin complete all as specified and as directed by Engineer-in-Charge. Make : Anchor/Crabtree/Leader/Legrand/Havells

Supply and fix ceiling fan regulator AC, 230 volts electronic step type complete all as specified and as directed by Engineer-in-Charge. Make : Anchor/Crabtree/Leader/Legrand/Havells

Supply and fix in repairs double door, sheet metal enclosure powder coated MCB DB TPN 8 way with 200 Amps rated bus bar, 240 volt, Vertical type, IP 42 protection, flush in walls including making good of disturbed surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge. Make: Larsen & Toubro/ABB/Siemens/Schneider/Havells

Supply and fix in repairs MCB TPN,63amps, 415 volts,16 KA complete all as specified and as directed by Engineer-in-Charge. Make: Larsen & Toubro/ABB/Siemens/Schneider/Havells

Supply and fix in repairs double door, sheet metal enclosure powder coated MCB DB SPN 8 way with 200 Amps rated bus bar, 240 volt, IP 42 protection, flush in walls including making good of disturbed surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge. Make: Larsen & Toubro/ABB/Siemens/Schneider/Havells

Supply and fix in repairs MCB SPN,32amps, 240 volts,16 KA complete all as specified and as directed by Engineer-in-Charge. Make: Larsen & Toubro/ABB/Siemens/Schneider/Havells

Supply and fix in repairs MCB SP,6 to 32amps, 240 volts,16 KA complete all as specified and as directed by Engineer-in-Charge. Make: Larsen & Toubro/ABB/Siemens/Schneider/Havells

Supply and fix exhaust fan, AC, single phase, 230V, 300mm sweep, 1300 RPM, single phase with double ball bearing , 5 blade, metallic robust rust proof body & blade with louver for protection of bird and rain water including cutting round shape in wall, grouting the foundation bolt in the wall, making good the disturbed surfaces of wall including rendering, painting to match the existing surfaces and connection with three core copper flexible wire 16/0.209mm from ceiling rose to fitting complete all as specified and as directed by Engineer-in-Charge. Make: Crompton Greaves, Bajaj, Orient, Khaitan, Havels

Supply and fix in repairs LED tube light fitting 1 x 18 Watts, 230 volts, all pre wired fixed on walls with all fixing accessories such as 2 Nos of PVC square/round box, screws etc and connecting up three core flexible copper conductor cable of size 24/0.20 sqmm including LED tube light complete all as specified and as directed by Engineer-in-Charge. Make: Bajaj LED tube light Cat Part No BLRB 21W CWC or equivalent in Wipro/CG/Havells Make: Bajaj Batten Cat Part No BLRB DB 118 or equivalent in Wipro/CG/Havells

Supply, install, test and commission LED street light fitting 1 x 60 watts,pressure die cast aluminium housing, Heat resistance toughened glass with frame, IP 66 protection, better optics for uniform distribution complete with necessary copper wire connection of suitable size complete all as specified and as directed by Engineer-in-Charge. Make: Crompton greaves Ltd Cat No. NEXUS + LSTP-60-CDL or Equivalent in Bajaj/ Philips/Havells/Halonix

Supply and fix in repairs GI bracket made out of 40 mm bore GI pipe, medium grade 1.2m long bent to shape suitable for fixing of street light fitting including with 2 Nos MS clamps made with 40x5mm flat iron, bolts, nuts, washers etc including two coats of synthetic enamel paint over one coat of zinc chrome primer and fixing on electric pole complete all as specified and as directed by Engineer-in-charge. Make : SAIL/Indian tube co/Lanco Andra pradesh/Kubota pipes Ltd

Taking down ceiling fan of any make/type/size/sweep, at site from any height of the building for any defect, including removal of down rod/anchor fastener and refixing the same after cleaning oiling greasing bearing/bush change and painting with two coats of synthetic enamel paint in existing colour as per site requirement complete all as specified and as directed by Engineer-in-Charge.

Material and labour Earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to and including galvanised earth lead wire 4 mm dia, 7.5 m long, by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel with provision of charcoal & common salt packed upto minimum 150 mm all around the earth plate, and protected by 15 mm bore light grade galvanised iron pipe and connected to control board / panel / equipment complete all as shown in electrical plate No.3 of MES schedule Part I with PCC pit in PCC 1:2:4 type B1 using 20 mm graded stone aggregate, MS angle iron frame of size 50mm x 50mm x 5mm, cast iron cover with locking arrangements, GI 20 mm bore medium grade pipe and CI funnel with wire mesh for watering arrangement including necessary excavation and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge.

B/R Works (AGE B/R Malad) Dismantling of wall and ceiling board (fibre,pulp,insulation etc) or insulation board/slabs/blankets any thickness including cover fillets complete all as specified and as directed by Engineer-in-Charge.

Supply and fix false ceiling of GI powder coated ceiling exposed grid system 'UNILOCK' comprising main runner 38 x 24 x 0.35mm cross tee 28 x 24 x 0.35mm and angle along with wall shall be in size 24 x 24 x 0.40mm including 4mm dia GI suspender fixed to ceiling and including 12mm thick gypsum board with all connected accessories suitably placed in false ceiling grid as per manufacture instruction etc complete alu8l as specified and as directed by Engineer-in-Charge. Make : Mangalam Timber Product / Gypsum Board / Jolly Bd, Mumbai / Indian Gypsum product / Armstrong World Industries

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges complete all as specified and as directed by Engineer-in-Charge.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated, steel sheet 0.50mm thick (total thickness including coating) of any colour having tensile strength of 550 MPA as in cladding to wall, roof covering, fixed with self tapping screws including dismantling existing asbestos sheet complete all as specified and as directed by Engr-in-Charge. Make: JINDAL /INDALCO/HINDALCO/ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets.

M/s. Deepak Traders

Vishal Builders

RAJU ENTERPRISES