REPAIR/ MAINTENANCE TO STREET LIGHTS, PERIMETER LIGHTS AND CONNECTED ACCESSORIES AT INS SHIVAJI LONAVALA

Receiving complaints from JE/E&M In-charge lodged by users and attending the same day by deploying 01 x electrician and 02 x helper, tracing and rectifying faults in the street lighting system by disconnecting power supply wherever required, checking and repairing/replacing defective LED street light fittings, LED drivers, LED modules, surge protection devices (SPD), photocells, timers, contactors, MCBs, MCCBs, feeder pillars, control panels, junction boxes, terminal blocks, pole cut-outs, underground cables, internal pole wiring, cable glands, lugs, ferrules, connectors, brackets, outreach arms, and all other associated accessories, including alignment of poles, removal of faults in circuits, loose connections, open circuits, short circuits, earth leakage and poor contacts (All items required for Repair/ Replacement will be issued items as mentioned in succeding paras of BOQ. The connected items including dismantling of defective components, providing and fixing consumables/stores such as insulation tape, ferrules, cable ties, screws, nuts, bolts, washers, glands, connectors and other minor materials required for rectification of the complaint, testing the complete installation, restoring supply, refixing all dismantled fittings and accessories to their original position, cleaning the work area and ensuring satisfactory operation of the street light installation complete in all respects as directed by the Engineer-in-Charge will be deemed included in quoted price Note : (i) Any complaint which is left out/unattendent 1 days by the electrician by any reasons the same to be communicated to the JE incharge /AGE E/M (ii) New material/stores provided for completing the job shall be measured and paid for separetely under relevent items of sch 'A'. (iii) Contractor shall provide the all type of T & P to each electrician for attending the internal electric complaints. (iv) Contractor shall provide the complaint register and complaint slip serially numbered in duplicate as per sample.If complaint received online the contractor should provide A4 size paper and printer for printing complaints. The rate of such items included in this items. (v) Any unattended complaints not done in specified time limit. The contractor shall penalty Rs. 200/- on each complaints per day is applicable.

Excavation in trenches not exc. 1.5m wide and not exc 1.5m in depth and getting out in soft/loose soil for laying of cable trenches all as specified and directed.

Excavation in trenches not exc. 1.5m wide and not exc 1.5m in depth and getting out in hard/dense soil for laying of cable trenches all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layer not exc 25cm all as specified.

Removal of surplus soil (excavated soil) to distance not exceeding 50m and depositing where directed at a level not exc 1.5m above the starting point and all specified.

Supply laying and testing cable XLPE insulated screened PVC beded,galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 25 sq mm 4 core. Including taking down old unserviceable cable any size by dismantling of all electrical connection etc all as specified and diercted.

Supply and lay DWC (Double Wall Corrugated) HDPE pipe of size 63/50 mm dia in trenches, along walls, floors, ceilings, or other required locations for protection of LT cables, including excavation where required, cutting/chasing, fixing with saddles/clamps, bends, couplers, sockets, end caps, junctions, fittings, accessories, making good disturbed surfaces, and all incidental works complete.

Supply laying and testing cable XLPE insulated screened PVC beded,galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 16 sq mm 4 core. Including taking down old unserviceable cable any size by dismantling of all electrical connection etc all as specified and diercted.

Supply laying and testing cable XLPE insulated screened PVC beded,galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 10 sq mm 4 core. Including taking down old unserviceable cable any size by dismantling of all electrical connection etc all as specified and diercted.

Supply and lay DWC (Double Wall Corrugated) HDPE pipe of size 50/39 mm dia in trenches, along walls, floors, ceilings, or other required locations for protection of LT cables, including excavation where required, cutting/chasing, fixing with saddles/clamps, bends, couplers, sockets, end caps, junctions, fittings, accessories, making good disturbed surfaces, and all incidental works complete.