Pond rejuvenation at village -jhajhar near balmiki basti,YEA WC-06

Cleaning jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m aboveground level and removal of rubbish up to distance of 50m out side the periphery of the area cleared

Pumping out water by Diesel pump of discharge capacity of 4000 lts per hour including fuel operator , suction & delivery pipes of size 4'' X 4'' length 150 as per direction of Engineer in Charge

Item code morth 301 Excavtion in soil using hydraulics excavator and tippers with disposal upto 1000 meters Excavation for road work in soil with hydraulics excavator including cutting and loading in tippers, trimming bottom and side slopes in accordance with requiremements of lines , grades and cross section and transportation to the embankment location within all lifts and lead upto 1000 meters

Add extra for sludge/mud/liquid 50% of Excavated earth 25% of H.No.3 UP PWD

Providing and laying in position cement concrete with 4 cm gauge approved stone ballast c sand and cement in pro of 8:4:1 including supply of all material labour tools and plants etc req for proper comp of work

Laying non-pressure NP2 class R.C.C Pipe jointed with stiff mixture of cement mortar in the proportion of 1:2(1cement: 2 coarse sand) including testing of joints etc, 250mm UP PWD SOR-2020/DAR-18/ NP2 pipe

Cement Concrete with 4cm gauge approved stone ballast corse sand and cement in the propertion of 8:4:1 including supply of all material labour tools and plants etc required for proper completion of the work

M-150 brick work in 1:6 cement & fine sand 1.25f.M mortar in foundation and plinth including supply of all materials labour complection of the work compiation of work (1:4:8)

Cement Concrete with 4cm gauge approved stone ballast corse sand and cement in the propertion of 4:2:1 including supply of all material labour tools and plants etc required for proper completion of the work. Same as above item no.279 but with 2cm gauge stone grit in stend of 4cm gauge stone lallast. UP PWD SOR-2020/DAR-18/279a

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (DAR/10.25.2/Based on UPPWD/SOR-2020))

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.

R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in- charge (cost of earth works in excavation, concrete works in foundation to be paid separately).

12mm Cement plaster of mix 1:6 (1 Cement : 6 coarse sand)

Please Enable Macros to View BoQ information