Renovation work to the Existing Government Girls Higher Secondary School at Nandhivaram, Guduvancherry in Chengalpattu District

Amount

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

15.1) Providing Cuddappah Slab for cupboard wardrobe, shelves, kitchen sinks,hearth slab and sunshade etc., for the following thickness I. 20mm thick (a) In Ground Floor

31) Weathering course

39) M.s Grills

41) Painting - New "iron work"

Electrical arrangement 74) Charges for assembling and fixing of ceiling fan

78) Providing Earthing station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0 m of 20mm B-class GI pipe (Type I)

Annexure 2.15) Supplying and filling stone dust

3.1.3) C.C.1:5:10 for Foundation & Basement

3.2.3) P.C.C. 1:2:4 for Foundation & Basement and other similar works

6.2.2) Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3")

7.4) Cleaning the Expansion joint portion (20mm x 30mm ) provided in different places using air bloer to remove dust particles and racking the bituminous pad with foam pad ( Size 12mm )

8.2.4.1) Providing and laying in position, Standardised Concrete Mix M-25 Grade a. Foundation and basement

9.2.2) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") a. In Ground Floor

10.2.2) Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm tk (B.P.) b. In Ground Floor

11.2.3) Brick partition walls 70mm thick using Flyash bricks of size of size 9”x4¼”x2¾” (23x11x7cm) in cement mortar 1:4 (One of cement and four of crushed stone sand) a. In Ground floor

b. In first Floor

16.2) Supplying and fixing of Terra cotta jally (Not below 50mm thick) of best quality and fixing in position

18.1) Formwork using M.S.Sheet a.For Column footings, plinth beam, Grade beam,Raftbeam, Raft slab etc.,

b. Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

21.5.2.2) Supply and Fixing Soild UPVC door Shutter with frame

22.3.3) T.W. frame & TW styles & rails with BWR double leaf shutters for cup board/ ward robes including two coat enamel paint & one coat primer.

28.1) Floor plastering in C.M. 1:4, 20 mm tk.

29.8.1) Glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm tk

29.9.1) Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).

32.1.1) Finishing top of roof with one course of pressed tiles over bed of CM 1:3 12mm thick mixed with water proof compound at 12% by weight of cement

33.2.1) Plastering in C.M. 1:5, 12 mm tk.

43.1) Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit (M25)

b) Augering 30cm dia

44.6) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992- type 'A' for Rain water down fall pipe

51.1) Supply and errection of Rotational Moulded Polyethylenewater storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 750 litres

52.1.2) Supplying, laying, fixing and jointing the following UPVC Pipe (Schedule-40) a) 20mm UPVC Pipe (Schedule-40)

b) 32mm UPVC Pipe (Schedule-40)

c) 40mm UPVC Pipe (Schedule-40)

d) 50mm UPVC Pipe (Schedule-40)

54.1.1) Supplying and fixing of of 15mm dia half turn CP long body tap

54.2.1) Supplying and fixing of of 15mm dia half turn CP short body tap

56.3.1) Supply and fixing of of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap In Ground floor.

64.1.1) Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with 3mm thick laminated hylem sheet for LIGHT POINT WITH CEILING ROSE (Open wiring)

65.1.1) Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with 3mm thick laminated hylem sheet for FAN POINT ,(Open wiring)

67.1) Open Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with 3mm thick laminated hylem sheet for 5 amps 5 pin plug socket point Switch Board itself

68.2.1) Wiring 1.5 sqmm copper wire for open wiring for 5 AMPS socket at convenient places (open wiring)

70.5.2) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with fitting

75.2) Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

76.1) Supply and laying 2 no of 8SWG GI earth wire for Pole earthing

82.3.1)Supply and fixing of LED Street lighting luminaries suitable for fixing 25 watts LED lamp

82.4.1) Supply, installation, testing and commissioning of following street light control panel suitable for 415V, 3 phase, 4 wire, 50Hz distribution system.

82.4.2) Supply and erection of standard coil earthening for street light pole with suitable 25mmdia GI pipe all poles

82.4.3) Supply, Erection of 8m Free Standing Single Arm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification.

82.4.5) Supply and fixing of 48 wattts LED street light fitting with control gear (driver unit) to be fixed with 7 /8m height swaged pole on both Single / Double arm bracket

82.4.7) Supplying and fixing of 1 x 48W lamp post top latern fitting for gate light

84.3.1) Run off mains with 2 wires of 4 Sqmm copper PVC insulated unsheathed single core 1.1KV cable (Open Wiring)

93.1) Plastering with CM 1:3, 12mm with WPC

96.7)Supplying and laying of Rubber moulded hydraulic pressed Paver blocks 83mm thick

108.1.2) Supplying and fixing of 65 mm dia G.I pipe including cost of labour charges cutting, threading, jointing i) 65mm dia GI pipe

151.3.1) Supply and laying of the following size of PVC LTUG aluminium armoured cable (below GL) a) 3.5 c x 185 sq mm PVC LTUG aluminium armoured cable

b) 3.5 c x 120 sq mm PVC LTUG aluminium armoured cable

c) 3.5CX 35sq.mm PVC LTUG aluminium armoured cable

d) 4 C x 10 sq.mm. PVC LTUG aluminium armoured cable

155.1) Supply and erection of 125 Amps capacity floor mounting / wall mounting panel board (Cubical type) with bus bar chamber

161.1.4) Supplying and fixing of brass cable gland suitable for following core sqmm PVC armoured LTUG cable a 3.5 c x 185 sq mm PVC LTUG aluminium armoured cable

b) 3.5 c x 120 sq mm PVC LTUG aluminium armoured cable

c) 3.5CX 35sq.mm PVC LTUG aluminium armoured cable

d) 4 C x 10 sq.mm. PVC LTUG aluminium armoured cable

161.4) Supply and providing cable end termination of following PVC LTUG Aluminium armoured cable i 3.5 c x 185 sq mm PVC LTUG aluminium armoured cable

b) 3.5 c x 120 sq mm PVC LTUG aluminium armoured cable

c) 3.5CX 35sq.mm PVC LTUG aluminium armoured cable

d) 4 C x 10 sq.mm. PVC LTUG aluminium armoured cable

162.2.1) Supplying and clamping of PVC armoured LTUG cable(Above GL) 3.5CX 35sq.mm PVC LTUG aluminium armoured cable

a) 4C x 10 sq.mm. PVC LTUG aluminium armoured cable

175.1.1) Supply and fixing of 7 Segments (3 tier) 3 phase distribution board with MCB 4 way TPMCB sheet steel distribution boards flush type

207.3.1) Providing two coats of Plastic Emulsion PAINT including primer for inner walls

207.3.7) Painting One coat of Old Walls with ready mixed interior EMULSION PAINT of first class quality including Thorough scrapping

207.4.1) Providing two coats of Exterior Emulsion paint including primer for outer walls

207.4.2) Painting Two coats of Old Walls with ready mixed Exterior EMULSION PAINT of first class quality including Thorough scrapping

207.5) Painting one coat of OLD wood work and other similar works such as Door shutter & Window Shutter with approved second class synthetic enamel ready mixed paint of approved quality including Thorough scrapping

207.7) Painting one coat of OLD Iron work and other similar works such as grills with approved second class synthetic enamel ready mixed paint of approved quality including Thorough scrapping

207.8.2) Painting the Existing plastered surface with animation painting

207.8.3) Painting the old plastered surface 1 st class apcolite satin enamel paint

209.5.2) Clean removal of Cement plaster from walls and racking out joints 20mm deep.

213)Dismantling the damaged brick works in cement mortar in all floors

217) Dismantling the damaged Pressed tiles laid over cement mortar and Weathering Course

222.4.1) Removing the Existing PVC door with frame for Toilets without affecting the adjacent structure,

224.1) Dismantling the Existing RCC jally ventilator without affection the adjacent structure

228.1) Chipping of concrete and roughening the surface

243.7) Removing the Existing MS grill door for staircase without affecting the adjacent structure,

243.7.1) Thorough scrapping of old plastered surface

343.8.1) Supplying, Fabrication and Erection of Ms – 72x 72mm tube column, 233 thick 60/40 Rectangular tube as Truss at every 10 Feet Spacing and 50 X 2mm Thick Square Tube

361.5) Supplying and fixing of Ivory colour Vitrified Tiles of size 59.5x59.5cmx10mm for flooring in cement mortar 1:3 20mm thick

615.2.8) Removing light point with ceiling rose ,5AMPS Switch board, convyence place & Fan point , PVC pipe

615.2.9) Removing Ceiling Fan & Tube Light including labour charges and using any machineries in all etc

832.5.2) Supplying and fixing in position of UPVC window of casement type (open) for all sizes

832.5.3) Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

961.5) Supplying & fixing of electrically operated sanitary Napkin incinerator / destroyer 200 nos per day to top door opened

961.6) Supply of Water Purification with Drinking water RO Plant of capacity 2000LPH with UV System and all Accessories with the technical Specifications

961.7) Installation & Erection of Charges for the Water Purification with Drinking water RO Plant of capacity 2000LPH with UV System.

Haarine Associates

BHARATH BUILDING CONSTRUCTION

Bidder Name

R.SURESH BABU

BHARATH BUILDING CONSTRUCTION

Haarine Associates