Loading
Loading…
Loading…
Tender Value
₹13.1 L
EMD Value
₹16,400
Closing Date
21 Sept 2026, 6:00 pm
STAFF OFFICER, CIVIL DIPKA AREA
OFFICE OF STAFF OFFICER CIVIL, DIPKA AREA, CG 495452
Replacement of rusted profile sheet of 10 cum Shovel section along with packing of shutter portion at workshop of Dipka Expansion project at Dipka Area
2026_SECL_363989_1
SECL/DA/CIV/e-TENDER/26-27/24 dated 08-09-2026
Open Tender
Civil Works - Others
Percentage
30 days
DIPKA AREA
AS PER NIT
3 documents required · 3 mandatory
₹16,400
8 Sept 2026
8 Sept 2026
22 Sept 2026
8 Sept 2026
21 Sept 2026
9 Sept 2026
8 Sept 2026 - 14 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | 3.5 | cum | 226 | ₹791 |
| 1.02 | Brick work with fly ash bricks in super structure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) | 12.08 | cum | 6,297.3 | ₹76,039.9 |
| 1.03 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) | 39.75 | sqm | 226.5 | ₹9,003.38 |
| 1.04 | Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 microns
minimum to avoid scratches during transportation and should besupplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever required. | 1,192 | sqm | 618 | ₹7,36,656 |
| 1.05 | White washing with lime to give an even shade : New work (three or more coats) | 998 | sqm | 25.8 | ₹25,748.4 |
| 1.06 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. | 500 | m | 163.65 | ₹81,826.74 |
| 1.07 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete | 184 | KG | 97.64 | ₹17,965.76 |
| 1.08 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete.Ridges plain (500 - 600 mm). | 50 | Mtr | 532.4 | ₹26,620 |
| 1.09 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of. G.S. Sheet. | 1,192 | sqm | 112.6 | ₹1,34,219.2 |
| 2 | Total Impact of GST for the Purpose of CTC | 1 | Nos. | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.48 MB
Tendernotice_2.pdf
PDF • 2.03 MB
Tendernotice_3.pdf
PDF • 1.05 MB
BOQ_376905.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .