Special repair to HT Over Line, Street lighting, Astro time switch and connected item in East Camp at MFFR under AGE (I) MFFR

Amount

M&L for PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in foundations of poles, filling, mass concrete and similar works, complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate as in foundations of poles, stay assembly, filling, mass concrete and similar works, complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in copings, pedestal of poles and the like including use and waste of form work (straight or curved), all exposed surface of concrete finished even & smooth without using extra cement, complete all as specified and as directed. Note for item No 01 to 03 : Volume of pole/strut embedded in concrete shall be deducted for the purpose of payment.

S&F pre-stressed concrete pole 11 metre long of cross section 152mm x 152mm at the top and 152mm x 260mm at bottom, class 9, complying with requirements of IS-1678-1998 with & including two coats of synthetic enamel paint in alternate black and yellow strips 30 cm each upto 1.5 metre height from PCC coping/pedestal and marking pole number in letters & figures of size not less than 8cm height, including taking out old unserviceable pole complete all as specified and as directed

S&F Prestressed concrete pole, 9.0 metres long, 102mm x 152mm at top and l02mm x 289mm at bottom, class 10 & including two coats of synthetic enamel paint in alternate black and yellow strips 30 cm each upto 1.5 metre height from PCC coping/pedestal and marking pole number in letters & figures of size not less than 8cm height, including taking out old unserviceable pole complete all as specified and as directed Note for item 4 & 5 :- Excavation, earthwork, PCC in foundation & coping shall be measured and paid for separately.

M&L in replacement Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections, including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and as directed.

M&L in replacement Aluminium conductor, steel reinforced (ACSR) including jionting for over head line on pole including binding wire 14 SWG, jumpers line tapes etc complete all as specified and as directed. ( for measurement and payment purpose of ACSR the weight of winding wire shall not be considered.)

M&L in replacement Loop type insulator, vitreous porcelain, white, brown or green: Large size, with overall dimensions 90mmx140mm, clearance of hole 25.5mm complete all as specified and as directed.

M&L in replacement Stay assembly complete with accessories as shown in electrical plate No. 1 (loop type insulator, stay clamps, excavation and concrete measured separately) complete all as specified and as directed.

S&F in replacement Switch air break, gang operated outdoor, Horizontal operated type, HT 11 KV, Triple pole, 400 Amps, 3 insulator per phase, tilting/rocking horizontal type, with fixed contacts of phosphorous bronze and moving contacts of copper, manually operated from ground level with operating mechanism including GI tubing medium grade 25 mm bore operating rod, pad locking arrangements, MS arcing horns, flexible braiding earthing blades, rod and contacts without drop out fuse assembly and jumpers with Mink conductor line, taps, clamps, colour coated HT sleeves and fittings suitable for horizontal mounting, complete all as specified and as directed.

M&L in replacement lighting arrestor expulsion type complete with all fittings, Transmission class, discharge capacity 65 kilo amp, 11000 volts complete all as specified and as directed.

S&F in replacement GI wire 4 mm and stranded 7/1.6 mm dia fixing for cradle in road crossing and stay wire complete all as specifiedand as directed.

S&F in replacement of LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

S&F in replacement post top lantern made up of iron and glass duly painted in black colour, including LED 9Watts CCT-3000K, 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light protection with impact and corrosion resistant complete all as specified and as directed.

S&F in replacement garden spike light made up of aluminium,wattage- 12W of size 122x85x85mm,Lamp base-LED COB integrated luman/CCT- 625lm/3000K,80% energy savings,outdoor ambient lighting protection against dust & jet of water from any direction, IP 65 fixture complete all as specified and as directed. Model No- 31386 of philips or equivalent out of makes specified in list of makes.

S&F in replacement LED bollard light 9W,dimensions -85mmx85mmx800mm, black premium finish,luman/CCT-460lm/3000K, IP 65, outdoor lights, typically giving off light from the side, suitable to illuminate walkways, steps or pathway complete all as specified and as directed. Model No-58169 of philips or equivalent out of makes specified in list of makes. NOTES FOR LED LIGHT FITTINGS (Item 13 to 16) : (i) All LED light/luminare shall meet the provision laid down in IS - 16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part -II / Section 13. (ii) Contractor shall submit test report of LED street light fitting from Government accredited test laboratory for LM-79 and LM-80. (iii) Contractor has to furnish a replacement warranty of 05 years for LED light fittings complete including lamps from the date of completion of contract. The product will be replaced on site free of cost in the following case :- (a) Manufacturing defects. (b) Failure due to mechanical and electrical impact. (c) Drop in lumen (or lux at 1 m) below 90% of claimed values of lumen (or lux at 1 m) of the LED /Luminaries.

M&L for two core FRLS PVC insulated flexible muiltstand copper conductor cable of size 2.5 Sqmm in PVC conduit including fixing arrangement Complete for connection from terminal box to street/ flood light fitting complete all as specified and as directed.

S&F in replacement Pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 150 mm height, 150 mm dia. for working pressure 11000 volts grade, complete all as specified and as directed.

S&F 'Single Disc assembly' Disc type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 145 mm height, 255 mm dia. for working pressure 11000 volts grade, complete all as specified and as directed.

M&L for Earthing complete with galvanised steel perforated pipe electrode, 40mm bore,medium grade, 2.5 metres length,buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion complete all as specified and as directed.

M&L for Earthing to Transformer / GOD switch / equipments / panels etc with & including galvanised mild steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the earth plate at a depth not less than 1.5 m below ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides, connected to & including galvanized mild steel strip 32x6 mm as earth lead, including nuts, bolts, check nuts & washers of galvanized iron or steel and riveted/welded to earth plate at one end and other end of strip connected to transformer / GOD / Panel / equipment body / test point with two Nos nuts bolts or welding with steel structure, GI earth strip encased in and including 40mm bore GI light grade perforated pipe with all fittings from upper edges of earth plate upto 7.5 metre above ground level fixed with and including 25x3 mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from earth pit to top of electrode and including funnel, wire mesh, copper lugs etc complete with earth pit in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and 40mm thick RCC (1:2:4 type B1) cover complete all as specified and shown in electrical plate No 3 of SSR Part-I including necessary excavation and earthwork in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exc 50m complete all as specified and as directed including dismantling & taking out old existing unserviceable earthing.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

S&F junction box out door type of external dimensions 30cmx20x13cm, single door type hinged with locking arrangement front operated, 3 phase and neutral bus bar including MCB SP 6 Amp and connecting the incoming/out going cables with nuts, bolts etc complete all as specified and as directed.

S&F in replacement street light fitting bracket made out of 40mm bore GI pipe, light grade, tubing bend to shape, 1.5 metre long, fixed to pole/wall with and including two sets of clamps made out of flat iron of size 40 x 6 mm with bolts, nuts and washers, complete, all as specified and as directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for route of cable and getting out complete all as specified and as directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and exc exceeding 1.5 metre but not exc 3.0 mtr in depth for route of cable and getting out complete all as specified and as directed.

Returning, filling in soft/loose soil including spreading, leveling, watering and well ramming, in layers not exc 25 cm complete all as specified and as directed.

Removing of surplus soil to a distance not exc. 50 meter and depositing where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Supply and laying of double wall corrigated pipe of outer dia 77mm and inner dia 63 mm for cable protection as per IS-16205 complete all as specified and as directed.

M&L for borning of holes under main road Pavment,hard standing by trenchless technology using ultra sound tecnique and necessary machine for accomodet upto 80mm bore DWC pipe in the drilled holes, returning,filling in the end working space including removal of surface soil and making good the surface complete all as specified and as directed. Note:-(i) DWC pipe shall be measured and paid separetely.(ii) Only length of the road /hard standing /pavement will be measured and necessary excavation at both side of bore will be measured and paid seperately under relevent item of the BOQ.

S&F of automatic street light switch using infrared sensor based Nature Switch-, 25 kw equally distributed, 63 Amps,3-pole, Model - Swadeep-02 EC 25 Kw3P or equivalent for automatic switching of street lights based on LUX level of natural light . The sensor (Nature switch ) along with suitable power contactor rating 63 Amps 3- pole & 40 Amps 2-pole, MCB SP 63 Amps -03 nos and support terminals should be enclosed in pole/wall mountable enclosure made of rust proof ,electric shock proof, termite proof and FR grade SMC Junction box (Sintex make) confirming to IP54.The contactor suitable to 3- phase load of 25 kw , rating 63 amps 3pole, MCB rating 63 amps SP 03 Nos complete all as specified and as directed.

Dismantling of existing 100KVA transformer from the two pole structure after disconnection of HT and LT lines and earthing,placing the transformer on a temporary but safe plinth, reconnection of all HT/LT connections and restroration of power supply complete in all respects as directed by the Engineer-in-charge. Note:-All mtrl required for making the temporary arrangment shall be arranged by the contractor at his own cost and shall remain the property of the contractor.After placing the Transformer on the new two pole structure complete all as specified and as directed.

After erection of the new two ploe structure, shifting of the 100KVA transformer from the temporary plinth to the newly erected two pole structure, reconnection of all HT and LT connections, and restroration of power supply complete all as specified and as directed.

KANINWAL ENTERPRISES (BID ID -3495369)

M/S BIKANER CHEMICAL LABORATORIES (BID ID -3495331)