Development of Open-air Party zone with stage, toilet block, green rooms, and Boundary wall opposite IMAX at lake view park, Hyderabad

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc, as per SS - 20 B (APSS 308). Ordinary soils-Mechcanical Means-Upto 3 m depth including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately etc, complete for finished item of work as per Technical Specification Clause 202 MORD / MORTH and including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Plain Cement concrete 1:3:6 nominal machine mixing with concrete mixture (Cement:Sand: Metal) as per IS 456 using 20mm size graded machine crushed hard granite metal (Course aggregate) from approved Quarry / source including cost and conveyance of all materials like Cement , sand, Metal, Water etc to side and inclusive of all materials all operational incidental , labour charges like machine , mixing placing of concrete compacting, curing, overhead charges and contractor profit etc excluding seigniorage charges etc. complete for foundations flooring footings bed etc.complete for finished item of work and as directed by Engineer in Charge.

Supply and spreading of stone crusher dust (HBG stone chips 2.36 mm and below ) not more than 10% passing 0.075 sieve. for resting the pavers and filling the voids and crevices between the pavers, including cost and coveyance of all materials to site, leads, lifts, and labour charges etc., including Contractor's and over head profit but excluding seinorage charge, complete for finished item of work and as directed by Engineer In Charge.

Supply and placing of Reinforced Design Mix Concrete M 25 grade (1:1:2) corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm and down size graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50:50) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges, seigniorage charges etc, complete for finished item of work and as directed by Engineer-in-charge. FOR FOOTING

Supply and placing of Reinforced Design Mix Concrete M 25 grade (1:1:2) corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm and down size graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50:50) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges, seigniorage charges etc, complete for finished item of work and as directed by Engineer-in-charge. FOR PEDESTAL

Supply and placing of Reinforced Design Mix Concrete M 25 grade (1:1:2) corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm and down size graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50:50) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges, seigniorage charges etc, complete for finished item of work and as directed by Engineer-in-charge. FOR PLINTH BEAM

Supply and placing of Reinforced Design Mix Concrete M 25 grade (1:1:2) corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm and down size graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50:50) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges, seigniorage charges etc, complete for finished item of work and as directed by Engineer-in-charge. FOR COLUMNS

Supply and placing of Reinforced Design Mix Concrete M 25 grade (1:1:2) corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm and down size graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50:50) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges, seigniorage charges etc, complete for finished item of work and as directed by Engineer-in-charge. FOR BEAMS

Supply and placing of Reinforced Design Mix Concrete M 25 grade (1:1:2) corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm and down size graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50:50) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges, seigniorage charges etc, complete for finished item of work and as directed by Engineer-in-charge.- Slab 150mm

Providing High Yield Strength Deformed HYSD Fe 500/500D/550D of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Masonry work in CM(1:6) prop with fly ash cement of size 290mm x 225mm x 140mm for manufacturing fly ash solid blocks using fly ash of 80kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including all materials and all labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift and lead charges, curing, including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.. (APSS No. 501 & 504).

Coarsed Rubble Stone Masonary 2nd sort in CM 1:6 using selected size stones including bond stones from approved quarry including cost of all materials at site like cement, sand, stones, water etc to site other taxes on all materials all operational incidentals and labour charges including dressing of stones to required sizes, curing etc including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Plastering with CM 2 coats, 12 mm thick, base coat in CM (1:5), 8mm thick and top coat in CM (1:3), 4mm thick etc, including cost and conveyance of all materials like cement, sand, water etc. to site, exclusive of seigniorage charges, inclusive of all operational incidental , lift charges, labour charges like mixing, placing, curing etc, including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.. BLD-CSTN8-10

Flooring with non-skid full body ceramic floor tiles of size 0.6m x1.2 m (Kajaria) thickness between8- 9 mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles, including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Supply and Laying with Flamed/ bush hammered grey high polished Granite slabs 25-30 mm thick slab other than black to suit the design over base coat of of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth. the item is inclusive of cost and conveyance of all materials like granite, cement, sand and water etc to site and overheads & contractors profit complete excluding cost of seigniorage charges etc., complete for finished item of work as directed by the Engineer in charge.

Skirting with High polished Granite slabs 25-30 mm thick slab other than black to suit the design set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth. the item is inclusive of cost and conveyance of all materials like granite, cement, sand and water etc to site and overheads & contractors profit complete excluding cost of seigniorage charges etc., complete for finished item of work as directed by the Engineer in charge.

Supply and Laying with 60-75 mm thick flamed/ bush hammered Sadarali / Banglore Granite slabs to suit the design over base coat of of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth. the item is inclusive of cost and conveyance of all materials like granite, cement, sand and water etc to site and overheads & contractors profit complete excluding cost of seigniorage charges etc., complete for finished item of work as directed by the Engineer in charge.

Providing dadooing to internal walls with 0.6 mx 1.2 m ceramic tiles (Kajaria) of 9 mm thick of length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Providing and applying Exterior grade Texture ready mixed paint with sand texture added sand particles Acrylic copolymers and mineral compounds, bactericides and various additives of average 4 to 6 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. including overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge. -including cost of access scaffolding

Supply & application of one coat water based cement primer, acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound) content less than 30 grams/ Lit. of approved brand and shade, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Supply and fixing of pre-painted steel top hung and fixed louvered ventilators made of pre - painted steel as per IS 513 of -0.58 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint & 4 mm pinhead glass for ventilators with EPDM Gasket with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6 pitch complete for finished item of work for (i) Ventilators: Fixed louvers 2'-0 x 2'-0 (609.6x609.6mm)(Box section) outer frame section size of 33 x 56 mm and (ii) Ventilators: Fixed louvers 4'-0 x 2'-0 (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm and (iii) Ventilators: Fixed louvers 4'-0 x 3'-0 (1219.2 x 914.4 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Verticalmembers are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used withreverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall in including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Supplying and fixing of 28/30 mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fiber), and the remaining 15% additives, and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete excluding cost of hinges, latches, aldrops including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Supply, Installation and commissioning approved make floor mounted Close Coupled wash down EWC conforming to IS:2556 (Part 8)-2004 suit with 'P' ' trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: Coloured-Grade-I/Grade-II including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm -Double C.P. Pillar cock including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Supplying & Fixing low down porcelain flushing tank with lid 10 Lit Capacity with internal components including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

SSupplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter – (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl Coated Fibre mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, , excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge..-GF

Supply, fabrication and fixing of Mild Steel rectangular/square/circular hollow section of specified size including cost of welding rods, power charges, Labour charges for erecting & fixing, cutting, placing, welding and erecting in position and fixing etc, including cost & conveyance of all materials, wastage, all operational, incidental charges, overheads & contracors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer In Charge.

Supply, fabrication and fixing of Mild Steel, structural steel ie, angles, channels & I-section of specified size including cost of welding rods, power charges, Labour charges for erecting & fixing, cutting, placing, welding and erecting in position and fixing etc, including cost & conveyance of all materials, wastage, all operational, incidental charges, overheads & contracors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer In Charge.

Supply and fabrication of Mild steel plates of different sizes for supporting the various members including cost of welding rods, power charges, Labour charges for erecting & fixing, cutting, placing, welding and erecting in position and fixing etc, including cost & conveyance of all materials, wastage, all operational, incidental charges, overheads & contracors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer In Charge.

Providing and fixing ornamental cast iron cylindrical balls for railing including casting to required sizes and shapes placing in position as per approved design, including cost and conveyance of all cast iron sections, wastages and all operational, incidental charges including labour charges etc, including overheads and contractor's profit but excluding seignorage charges complete for finished item of work as directed by Engineer-in-charge

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 withstandard C.P. Spreader fixed with screws completeIndian make : 410 x 265 x 305 mm including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Supplying & fixing approved make Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-2004 with "P" or "S" trap: 580 mm x 440 mm etc. including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Supply & fixing of PVC low level system with internal components & short bend: 10 Liters capacity Single Flush including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 10 years warranty.labour charges fixing etc including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Supply of 12" (300mm) Light duty exhaust fan with wire guard etc complete etc., complete. Makes : Crompton / Bajaj Bahar WG / Havells Ventil Air-DB / Orient hill air. including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Supply of 50mm PPR Ball Valve conforming to DIN Standards 8077/8092 etc., labour charges fixing etc including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Supply and transportation of 20W +/-10%, >/ 2000 lumens, 1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, PF≥0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by thedepartment and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty with BIS Certification.LUMINAIRE MAKE: Phillips / OSRAM / Wipro / Crompton /Bajaj / Havells / Jaquar / Panasonic / Halonix / HPL / Eveready / Surya /Keselec / Arraystorm / GM /Goldmedal / Goldwyn / Fortune Arrt /Lighting Technologies / Bee-Lite. LED MAKE : Philips Lumileds /Cree / Nichia / Osram / Samsung / LG LEDs. including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Supply of premium make CPVC Pipes of 41.30mm OD Pipe- SDR 13.5 including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

S&F premium make CPVC Pipes of 22.20mm OD Pipe- SDR 13.5, including cost of loading, cost of conveyance, unloading, labour charges etc, including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Manufacture, Supply, & Delivery of 200mm Dia Pipe Series (S20) unplasticized Nonpressure polyvinyl chloride(PVC-U) pipes of dark (any shade of brown) for use in underground drainage & sewerage system conforming to IS 15328/2003) with solvent cement jointing as per specification inclusive of transportation to the subdivisional stores anywhere in T.G, including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge..

Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop;½” thick both inside and outside fitted with 20” dRCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand,bricks, water etc., to site, and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., c including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge. as per Standard specification.

PVC PIPES & FITTINGS (Materials shall be procured from the list of approved Brands/ Manufacturers/ Suppliers) 110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

S&F of 15 mm brass body premium variety Chromium Plated finish bib tap angular shape with wall flange of not less than 500 grams weight with quarter turn spindle with either internal or external threaded connection conforming to IS 8931 and with 10 years warranty including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight with quarter turn spindle with either internal or external threaded connection conforming to IS 8931 including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

S&F of 15 mm brass body CP finish pillar tap of not less than 500 grams weight quarter turn spindle conforming to IS 8931 including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

S&F of 15 mm brass body CP finish two way bib tap of not less than 400 grams weight with quarter turn spindle internal/ external threaded connection conforming to IS 8931 including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

S&F of 15 mm brass body Premium variety Chromium plated finish Swan neck tap with right/left hand operating knob with aerator of not less than 500 grams weight quarter turn spindle conforming to IS 8931 and with a warranty of 10 years

Manufacture, Supply, & Delivery of 75mm Dia of PVC PIPES & FITTINGS (Materials shall be procured from the stores anywhere in T.G, including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Random Rubble stone masonry, in CM (1:6) prop: (Cement: Sand) using Hard Granite stones from approved quarry including cost and conveyance of all materials like Granite stones, cement, sand, water, etc., to site including all materials, all operational, incidental, and labour charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing, contractor profit and over head charges, excluding seigniorage charges etc., complete for finished item of work and as directed by Engineer In Charge for foundation and basement (APSS No. 601 & 615), BLD-CSTN6-12

Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges, including all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary etc., including overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge. , external walls

Painting with 2 coats of ready mixed synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound ) content less than 30grams/Lit. over primer coat of first quality of approved make for new iron work including cost and coneyance of all materials like paint brushes etc. to site including all labour charges for preprationof surface painting etc including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 -3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc but excluding seignorage charges. complete for finished item of work and as directed by Engineer In Charge.

Refilling with useful excavated earth (excluding rock) in trenches, sides of foundations and basement etc with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and including all incidental, labour charges, hire charges, T&P, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.. (APSS NO. 309 & 310)

Collection supply and filling with borrowed Gravel including cost and coveyance of gravel and water to work site and all operatinal, incidental, labour charges, hire charged of T&P,including Contractor's and over head profit but excluding seinorage charges etc., complete for finished item of work and as directed by Engineer in charge (APSS NO. 309 & 310)

Carting away the surplus excavated earth/dismantled material/unwanted debris etc, from the work site with a lead of 16.0 km including initial lead including all incidental, labour charges, overheads and contractors profit and also loading& unloding and conveyance etcbut excluding seignorage charges. Complete for finished item of work and as directed by Engineer in charge.

Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of H.D.-35 with 560mm dia clear opening manhole covers and frames with ISI marking anywhere in T.G., F.O.R. destination including, loading, un-loading & stacking at site . I.S.I Mark including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose/BH/SBH Modular switch box with cover plate including all labour charges etc., complete for Light, Fan, Exhaust Fan etc., including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.Makes of cable:Finolex / RR kabel / Havells / APAR EBXL / KEI / L&T / VGuard.Makes of switches: Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina,

Supply, Transportation of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle’ kit, safety rope, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.5, Air delivery minimum 235 CMM, 350 RPM( tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Supply,Transportation and Fixing of wall mounting fan 450 mm (18") sweep A.C 50 Hz 1350 rpm oscillating type with regulator unit for speed control and service value 2.7 CMM/watt with all accessories including safety pin, nut bolts, washers, labour charges, transportation of the material to the site, fixing, etc including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Supply and fixing of 20mm outer dia Medium grade (1.8 mm thick) FRLS with IS:9537 part 3 rigid P.V.C. pipe (ISI MARK) concealed in wall with all required MS junction deep boxes, MS bends and all accessories including masonary, labour charges etc., complete for fan points, light, EPABX, LAN, and CCTV, Bell, including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge. Makes : Sudhakar / Finolex / Modi / VIP / Precision / Universal /Million Plast

Supply and fixing of 6-32A SP MCBwith cost and conveyance of materials and labour charges, transportation etc including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.

Supply and fixing of 40 A SP MCB with cost and conveyance of materials and labour charges, transportation etc including all incidental, labour charges, overheads and contractors profit etc but excluding seignorage charges, complete for finished item of work and as directed by Engineer in Charge.