The work of installing high mast and flag mast lights is underway at the Dharam Samaj College, Aligarh campus.

Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.(SOR - 2018 Item no.651

S/F Of national Flag size 12*8 perachute polyester (M.R.)

S/F Of fidder panel for flag mast (M.R.)

Supply and fixing of factory wired integral LED(phillips, bajaj, crompton, havills) flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect. CAT- AAA[ Item No 1454] SOR 2018

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (SOR - 2018 Item no.501 (i) 16 sqmm 4 core

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of (15 A ) TPN, complete in all respect. (SOR - 2018 Item no.807. D (ii)

Supply and Wiring of submains with 4 nos. of 4 sq. mm.FRLSH PVC insulated 1100 V grade single core multistrand copper conductorcable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge (SOR - 2018 Item no.289(C)

Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. (SOR - 2018 Item no.721

Supply and laying of 12mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect.(SOR - 2018 Item no.715.

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. (SOR - 2018 Item no.725. (b)

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect.(SOR - 2018 Item no.1455 AA

S/F of following size DWC HDPE pipe ISI marked along with all accessories like socket bend, coppers etc. confirming to is 1493 part-11 complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level), including excavation refilling the trenches but excluding sand cushioning and protective covering at complete as required 63 mm dia (OD)-63mm & 51 mm (ID)

Please Enable Macros to View BoQ information