Carryout the Renovation works in TNCSC godown campuses at Dindigul Unit-I, Natham, Vedasandur, Batlakundu, Palani and Ottanchatram in Dindigul District

Amount

CIVIL WORK

Carryout the Renovation works in TNCSC Godown campus at Dindigul Unit-1 in Dindigul Taluk and District. Clean removal of cement plaster from walls including all labour charges for removing and disposing off all the removed materials.

Dismantling AC Sheets roofing without timber and clearing away and carefully stacking materials useful for re-use and as directed by the departmental officers.

Supplying and fixing FRP sheet roofing of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

PLASTERING with cement mortor 1:5 (one cement and five sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

PLASTERING with cement mortor 1:3 (one cement and Three sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coat with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting new iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Supplying and fixing in position of 4mm pin headed glass of approved quality and required size in the wooden window shutter by using 50% of old teak wood beading, including cost of nail, conveyance and all labour charges etc. complete complying with standard specification and as directed by the departmental officers.

supply and filling in basement with wet mix 250mm thick in layers not execeding 250mm thick well watering ramming and consolidation including machenris for higher and running charges leader 5 cum capacity hire charges for tipper water springler vibtory roller etc complete and all labour charges as directed by the departmental officers.

Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

Carryout the Renovation works in TNCSC Godown campus at Natham Taluk in Dindigul District. Painting the walls with two coats of exterior plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coat with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Renewing the broken Air Inlet Window and Ventilator glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

Carryout the Renovation works in TNCSC Godown campus at Vedasandur Taluk in Dindigul District. Clean removal of cement plaster from walls including all labour charges for removing and disposing off all the removed materials.

Dismantling AC Sheets roofing without roof timber and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.

EARTH WORK excavation for foundation in all classes of soils and subsoils to full depth, as may be directed except in hard rock, requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered rammed and consolidated including depositing surplus earth with in the Godown or inside compound in places shown with initial leads and lifts, clearing, leveling site, shoring, strutting, baling of water wherever necessary etc., complete complying with standard specification and as directed.

Supplying and filling in foundation and basement with clean M.SAND in layers of 150mm thick, well watered, rammed and consolidated including watering etc., complete complying with standard specifications and as directed.

supply and filling in basement with wet mix 250mm thick in layers not execeding 250mm thick well watering ramming and consolidation including machenris for higher and running charges leader 5 cum capacity hire charges for tipper water sprinkler vibtory roller etc complete and all labour charges as directed by the departmental officers.

CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facial, vertical wall etc.

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed.

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed.

Supplying and fixing inposition of 12mm thick mastic pad for expansion joints etc., complete

Supplying and filling in foundation with Gravel in layers of not exceeding 150mm thick well watered, rammed and consolidated including watering etc., complete complying with standard specification and as directed.

Hoisting and fixing of 300mm dia RCC Hume pipes and collars proper gradient including all labour charges and all other incidental charges etc., complete as per standard specification.

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing FRP sheet roofing of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitudinal direction to avoid the lifting of roofing due to wind, the rate inclusive of necessary G.I screw, Rubber, Aluminum washer with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete

Labour charges for re alignment of existing AC Corrugated sheets including fixing of ridges, cost of U or J bolts and nuts, bitumen washers, etc. complete and as directed by the Engineer in charge complete.

Supply and fixing of Tarfelt with 3mm thick laid by bituminous compound including cost of materials and labour charges etc complete.

Brick work in CM 1:5 (one cement and five sand) using using best quality IInd Class chamber burnt bricks of size 9" x 4⅜" x 2¾ including cost of scaffolding, finishing curing etc., complete complying with standard specification In foundation and basement

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

PLASTERING with cement mortor 1:3 (one cement and Three sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coat with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Weathering course in Brick jelly and lime concrete using broken brick jelly of size 20 mm uniform gauge in pure slacked lime (no sand to be used) the proportion of brick jelly to lime being 32:12.5 by volume laid over the RCC roof slab in a single layer of required design , slope and finished thickness by beating the concrete with wooden and beaters of approved pattern keeping the surface constantly wet by springing lime Jiggery water etc,. complete as per standard specification and as directed by the Engineer in charge.

Finishing the top of Roof with one course of machine pressed tiles of size (23x23x2 cm)approved quality in C.M 1:3 -12mm thick mixed with water proofing compound confirming to IS @2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortor mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification

Renewing the broken Air Inlet Window and Ventilator glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Flooring with colour designed ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing the walls with Colour glazed tiles of size 200mmx300mmx6mm of approved quality and colour over a base layer of C.M.1:2, 10mm and pointing the joints with white cement mixed with colouring pigment at the rate of 0.40 kg/sq.m neatly in all floors, curing etc., complete complying with standard specification and as directed by the departmental officers. (The tiles should be got approved by the Executive engineer before use on works).

Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthen ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supply, laying jointing PVC pipes of 25 mm dia approved quality and best variety confirming to ISS and with ISI mark of the following sizes .including cutting threading and fixing PVC /GI specials but excluding the cost of such specials and fixing to wall with necessary teak wood plugs , clamps screws and making holes on the walls, floors and making good the dismantled portion to the original condition with necessary scaffolding charges etc., complete complying with standard specification

Supply, laying jointing PVC pipes of 20 mm dia approved quality and best variety confirming to ISS and with ISI mark of the following sizes .including cutting threading and fixing PVC /GI specials but excluding the cost of such specials and fixing to wall with necessary teak wood plugs , clamps screws and making holes on the walls, floors and making good the dismantled portion to the original condition with necessary scaffolding charges etc., complete complying with standard specification

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

Supplying and fixing in position 15mm dia brass Cp screw down tap / pillar tap (heavy duty) of approved make conforming to BIS specification s and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing PVC specials of approved quality and best variety as directed by the departmental officers. 25mm dia PVC Elbow

25mm dia PVC Tee

25mm dia PVC Coupling

25mm x20mm dia PVC reducer

25mm dia Hex Nipple

Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

Supplying and fixing of CI Manhole cover heavy duty of size 600 x 600 mm of best approved quality including raising the elevated portion around the manhole to accommodate manhole cover with brick wall in cement mortar 1:3,

Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

Carryout the Renovation works in TNCSC Godown campus at Batlagundu Taluk in Dindigul District. PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coat with best shell lime including cost .of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works).

Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

Supplying and fixing in position of 4mm thick pin headed glass of approved quality and required size in the wooden window shutter by using 50% of old teak wood beeding, including cost of nail, conveyance and all labour charges etc. complete complying with standard specification and as directed by the departmental officers.

Carryout the Renovation works in TNCSC Godown campus at Palani Taluk in Dindigul District. Clean removal of cement plaster from walls including all labour charges for removing and disposing off all the removed materials.

Dismantling AC Sheet roofing without roof timber and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers

Dismantling Plain Cement Concrete and clearing away as directed by the departmental officers.

Dismantling Reinforcement Cement Concrete and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.

Dismantling Pressed Tiles & Weathering Course and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corrugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing FRP sheet roofing of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitudinal direction to avoid the lifting of roofing due to wind, the rate inclusive of necessary G.I screw, Rubber, Aluminum washer with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete

Labour charges for re alignment of existing AC Corrugated sheets including fixing of ridges, cost of U or J bolts and nuts, bitumen washers, etc. complete and as directed by the Engineer in charge complete.

Supply and fixing of Tarfelt with 3mm thick laid by bituminous compound including cost of materials and labour charges etc complete.

Brick work in CM 1:5 (one cement and five sand) using best quality IInd Class chamber burnt bricks of size 9" x 4⅜" x 2¾ including cost of scaffolding, curing etc., complete complying with standard specification In foundation and basement

PLASTERING with cement mortor 1:5 (one cement and five sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

PLASTERING with cement mortor 1:3 (one cement and Three sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Painting the walls with two coats of exterior plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coat with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Painting old Wood work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthen ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supply, laying jointing PVC pipes of 25mm dia approved quality and best variety confirming to ISS and with ISI mark of the following sizes .including cutting threading and fixing PVC /GI specials but excluding the cost of such specials and fixing to wall with necessary teak wood plugs , clamps screws and making holes on the walls, floors and making good the dismantled portion to the original condition with necessary scaffolding charges etc., complete complying with standard specification

Supply, laying jointing PVC pipes of 20mm dia approved quality and best variety confirming to ISS and with ISI mark of the following sizes .including cutting threading and fixing PVC /GI specials but excluding the cost of such specials and fixing to wall with necessary teak wood plugs , clamps screws and making holes on the walls, floors and making good the dismantled portion to the original condition with necessary scaffolding charges etc., complete complying with standard specification

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthenware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

Supplying and fixing in position 15mm dia brass Cp screw down tap / pillar tap (heavy duty) of approved make conforming to BIS specification s and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (taps should be got approved by the Executive Engineer before use on the works)

Supply and fixing PVC specials of approved quality and best variety as directed by the departmental officers. 25mm dia PVC Elbow

25mm dia PVC Tee

25mm dia PVC Coupling

25mm x20mm dia PVC reducer

25mm dia Hex Nipple

Supplying and fixing in position of 4mm thick pin headed glass of approved quality and required size in the wooden window shutter by using 50% of old teak wood beeding, including cost of nail, conveyance and all labour charges etc. complete complying with standard specification and as directed by the departmental officers.

EARTH WORK excavation for foundation in all classes of soils and subsoils to full depth, as may be directed except in hard rock, requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered rammed and consolidated including depositing surplus earth with in the Godown or inside compound in places shown with initial leads and lifts, clearing, leveling site, shoring, strutting, baling of water wherever necessary etc., complete complying with standard specification and as directed.

Supplying and filling in foundation and basement with clean M.SAND in layers of 150mm thick, well watered, rammed and consolidated including watering etc., complete complying with standard specifications and as directed.

supply and filling in basement with wet mix 250mm thick in layers not exceeding 250mm thick well watering ramming and consolidation including machineries for higher and running charges leader 5 cum capacity hire charges for tipper water sprinkler vibtory roller etc complete and all labour charges as directed by the departmental officers.

CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centers with casuarinas props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusive of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facial, vertical wall etc.

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed.

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed.

Supplying and filling in foundation with Gravel in layers of not exceeding 150mm thick well watered, rammed and consolidated including watering etc., complete complying with standard specification and as directed.

Supplying, fabricating and fixing in position MS channel 100 x 50 x 6mm at the edge of loading platform with M.S. bolt of 16mm dia of 45cm long including two coats of Anti Corrosive metallic nut brown colour paint over one coat of primer etc. complete.

Weathering course in Brick jelly and lime concrete using broken brick jelly of size 20 mm uniform gauge in pure slacked lime (no sand to be used) the proportion of brick jelly to lime being 32:12.5 by volume laid over the RCC roof slab in a single layer of required design , slope and finished thickness by beating the concrete with wooden and beaters of approved pattern keeping the surface constantly wet by springing lime Jiggery water etc,. complete as per standard specification and as directed by the Engineer in charge.

Finishing the top of Roof with one course of machine pressed tiles of size (23x23x2 cm)approved quality in C.M 1:3 -12mm thick mixed with water proofing compound confirming to IS @2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortor mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification

Paving the floor with best quality Vertified Tiles of size 600x600x8mm of approved colour, shade and quality laid in Cement mortar 1:3 (One cement and Three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.

Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

Carryout the Renovation works in TNCSC Godown campus at Oddanchathram Taluk in Dindigul District. EARTH WORK excavation for foundation in all classes of soils and subsoils to full depth, as may be directed except in hard rock, requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered rammed and consolidated including depositing surplus earth with in the Godown or inside compound in places shown with initial leads and lifts, clearing, leveling site, shoring, strutting, baling of water wherever necessary etc., complete complying with standard specification and as directed.

Supplying and filling in foundation and basement with clean M.SAND in layers of 150mm thick, well watered, rammed and consolidated including watering etc., complete complying with standard specifications and as directed.

supply and filling in basement with wet mix 250mm thick in layers not exceeding 250mm thick well watering ramming and consolidation including machineries for higher and running charges leader 5 cum capacity hire charges for tipper water sprinkler vibtory roller etc complete and all labour charges as directed by the departmental officers.

CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centers with casuarinas props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusive of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facial, vertical wall etc.

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed.

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed.

Supplying and fixing in position of 12mm thick mastic pad for expansion joints etc., complete

Supplying and filling in foundation with Gravel in layers of not exceeding 150mm thick well watered, rammed and consolidated including watering etc., complete complying with standard specification and as directed.

Hoisting and fixing of 300mm dia RCC Hume pipes and collars proper gradient including all labour charges and all other incidental charges etc., complete as per standard specification.

S K VADIVELMURUGAN