Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹1.7 CrAccepted-AOC | ₹1.7 Cr | L-1 | Accepted-AOC L-1 Successful bidder |
| 2 | L-2₹1.8 Cr+₹10.2 L (6.18%)Rejected-AOC | ₹1.8 Cr+₹10.2 L (6.18%) | L-2 | Rejected-AOC L-2 Successful bidder |
| 3 | L-3₹2.1 Cr+₹43.9 L (26.5%)Rejected-AOC D 4 276 KH NO 424 FIRST FLOOR BHAGEL SADAN BANK COLONY ROAD MANDOLI EXTN NEAR JAIL BOUNDARY DELHI 110093 | DELHI | DELHI | DELHI | 110093 | ₹2.1 Cr+₹43.9 L (26.5%) | L-3 | Rejected-AOC L-3 Successful bidder |
| 4 | L-4₹2.3 Cr+₹68.9 L (41.6%)Rejected-AOC | ₹2.3 Cr+₹68.9 L (41.6%) | L-4 | Rejected-AOC L-4 Successful bidder |
Tender Value
₹2.6 Cr
EMD Value
₹5.2 L
Closing Date
22 Jun 2024, 5:30 pmClosed
Chief Construction Engineer RAPP- 7 and 8
RAPP- 7 and 8, Rawatbhata Rajasthan site
Supply, fabrication and Installation of air duct distribution system for pump room, FM vault and New chiller area for RAPP-8.
2024_NPCIL_197685_1
NPC/RRS/78/2024/LT-B2713
Limited
Metal Fabrication
Item Rate
240 days
RAPP- 7 and 8
As per Tender Documents, Limited Tender
4 documents required · 4 mandatory
₹0
₹5.2 L
Head (C and MM-WG), RR Site
17 Oct 2024
12 Jun 2024
24 Jun 2024
12 Jun 2024
22 Jun 2024
15 Jun 2024
12 Jun 2024 - 14 Jun 2024
15 Jun 2024
Amount
Fabrication of GI duct including transformation piece (round to square duct) out of Class-IV GI sheet (GI coating thk. - 275 GSM) alongwith reinforcement and flanges, gaskets, tie tods, nut-bolt, sealent etc. as per Tech. Spec. PC-E-773. (GI Sheet and flange ,bracing material will be issued on free basis).
Erection of GI Duct. alongwith reinforcement and flanges, gaskets, tie tods, nut-bolt, sealent etc. as per drawing and Specification.( 16G to 24G size)
Supply and Fabrication of structural materials consisting of ISMB/ISMC/ISA/Rods type members, steel plates for supports, maintenance plate forms, sealing plate etc. confirming to IS : 2062.
Fabrication of structural materials consisting of ISMB/ISMC/ISA/Rods type members, steel plates for supports, maintenance platforms, sealing plate etc. conforming to IS: 2062.
Erection of CS permanent hanger / supports.
Supply, surface prepareation with abrasive blast cleaning and application of epoxy paint as per Techncial specification PC-E-615 & other applicable painting standard / documents and approved procedure. Epoxy painting system : Inorganic Zinc silicate primer (100 microns DFT) & finish coat with epoxy paint (150 micorn DFT) Total thickness - Not less than 250 microns DFT.
Installation of Resistors, Grilles & Diffusers
Installation of Anchor fastners of approved make or Equivelent Size M-10 to M-16.
Installation of gravity operated Blade Type Backdraft Dampers/ Flow Balancing Dampers etc.
Installation of Fan (5000 CMH to 25000 CMH)
Dismantling of erected GI duct including handling cutting, returning to Engineers store.
Dismantling of CS supports including handling, cutting and returning to Engineers store.
Dismantling of gravity operated Blade Type Backdraft Dampers.
Welding of CSxCS Pipe/ plate as per approved cutting plan, manufacturing drawings and NPCIL Technical specification. This includes edge Preparation,grinding, welding, finishing etc . (SW/FW)
Welding of CSxCS Pipe
welding of CSxCS plate
Dye penetrant examination of weld joint.
Dye penetrant examination of weld joint.
Fabrication of CS Plenum, CS duct and specials , fabricated from CS Sheet/plate 3.15 mm thk. confirming to IS 1079 Gr HR3 as per approved cutting plan, manufacturing drawings and NPCIL Technical specification. This includes edge Preparation,grinding, welding, finishing etc .
CS Plenum/ CS duct
Specials such as Mitres, Reducers, Wye pieces, Transformation pieces (TP) etc.
Supply of Grilles & Diffusers
Assistance during commissioning work.
Highly Skilled manpower.
Skilled manpower.
Semi Skilled manpower.
Unskilled manpower.
Handling, cutting, fixing of Aluminium foil for sealing PE opening in PRC area (north and South FM vault at RAPP-8). Aluminium foil will be issued on free basis.
Handling, cutting, folding of 3 mm thick (2 layer) and 4 mm thick (4 layer) lead sheet (to achieve total thickness of 22 mm) and fixing with metal frame on CS duct installed at PCP area of RAPP-8. Lead Sheet will be issued on free basis.
Om Engineering Enterprises
MGR FABRICATORS PRIVATE LIMITED
ULTRA TECH ENGINEERS
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .