Renovation and Interior works in Meditation Centre and Reception area of Admin building at IIM Sambalpur, Odisha

Sl No. Description Scheduled Amount (Rs.)

2 Electrical Works ₹6,67,060.00 ₹3,65,062.00

4 Total-B (Sch.+NSC Item) ₹81,79,558.00

Digitally signed by JAYA

BOQ for Renovation & Interior works in Meditation Centre and Reception area of Admin building at IIM Sambalpur, Odisha

Scheduled Amount

Sl No. Ref. Unit

Description Qnty Rate ( Rs.) (Rs.) NS Amount (Rs.)

Meditation Centre

Dismantling existing GI/Profile Sheet Roofing including ridge pieces,

flashings, gutters, fastening bolts, screws, clips and all associated

accessories from the existing structural steel roof framework, carefully

removing the sheets without damaging the supporting steel members,

1 NS stacking serviceable materials at designated locations within the project SQM 712.338 ₹ 350.00 ₹2,49,318.30

premises as directed by the Engineer-in-Charge, including lowering,

handling, loading, unloading, disposal of unserviceable materials,

cleaning of roof framework and all labour, tools, tackles and incidental

works complete. Sloping roof area shall be measured.

Providing and fixing complete Galvanized Tile Profile Roofing Sheet

Roofing System over existing structural steel roof framework, comprising

pre-painted galvanized tile profile roofing sheets of approved thickness

(minimum 0.50 mm TCT, 0.45 mm BMT or as specified), fixed directly

over the existing steel purlins/roof framework with self-drilling/self-

tapping screws provided with EPDM washers, including matching ridge

2 NS caps, barge flashings, eave flashings, valley flashings (where required), SQM 712.338 ₹ 2,975.00 ₹21,19,205.55

breathable waterproof roofing membrane (if specified), sealants, closures,

cutting, drilling, fitting, lifting, scaffolding, labour, transportation and all

accessories required for a complete weatherproof roofing system,

finished true to line and level as per approved drawings, manufacturer's

specifications and directions of the Engineer-in-Charge. The sloping roof

area shall be measured in square metres (SQM)

Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse

sand(zone-III) : 4 graded stone aggregate 6mm nominal size ),

reinforcedwith 1.6 mm dia mild steel wire, including centering and

shuttering,roughening cleaning, fixing and finishing in cement mortar

1:3 (1 cement:3 fine sand) etc. complete, excluding plastering of the

jambs, sills and soffits. 50 mm thick

Providing and fixing exterior grade High Pressure Laminate (HPL)

cladding of approved shade, texture and pattern on columns, comprising

6 mm thick exterior HPL sheets conforming to EN 438 standards, fixed

on aluminium/galvanized iron sub-framing system using SS 304

4 NS fasteners/rivets as per manufacturer's specifications, including necessary SQM 292 ₹ 7,186.20 ₹20,98,370.40

brackets, cleats, spacers, edge trims, sealants, cutting, drilling,

fabrication, handling, lifting and all accessories complete to achieve a

true, plumb and finished surface as per approved drawings and

directions of Engineer-in-Charge

Providing and applying white cement based putty of average thickness 1

5 13.80 mm, of approved brand and manufacturer, over the plastered wall SQM 100 ₹ 156.05 ₹ 15,605.00

surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade,

having VOC (Volatile Organic Compound ) content less than 50 grams/

litre of approved brand and manufacture, including applying additional

coats wherever required to achieve even shade and colour.

Steel work in built up tubular (round, square or rectangular hollow

tubesetc.) trusses etc., including cutting, hoisting, fixing in position

7 10.16.1 andapplying a priming coat of approved steel primer, including welding Kg 1250 ₹ 194.40 ₹ 2,43,000.00

and bolted with special shaped washers etc. complete.Hot finished

welded type tubes

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6

8 4.1.5 graded stone aggregate 20 mm nominal size derived from natural Cum 7.2358 ₹ 7,294.70 ₹ 52,782.99

Centering and shuttering including strutting, propping etc. and removal

of form for all heights: Foundations, footings, bases of columns

Earth work in excavation by mechanical means (Hydraulic excavator) /

manual means in foundation trenches or drains (not exceeding 1.5 m in

10 2.8 width or 10 sqm on plan), including dressing of sides and ramming of

bottoms, lift upto 1.5 m, including getting out the excavated soil and

disposal of surplus excavated soil as directed, within a lead of 50 m.

Excavating, supplying, stacking and filling of local earth by mechanical

transport upto a lead of 5km also including ramming and watering of the

earth in layers not exceeding 20 cm in foundation trenches, plinth, sides

of foundation etc. complete for all lift.

Steel reinforcement for R.C.C. work including straightening, cutting,

13 5.22A.6 bending, placing in position and binding all complete above plinth Kg 650 ₹ 107.85 ₹ 70,102.50

level.Thermo-Mechanically Treated bars of grade Fe-500 D or more.

Digitally signed by JAYA

Providing & laying of Selection no. 1 Doob grass turf with earth 50mm to

60mm thickness of existing ground prepared with proper level

andramming with required tools wooden and than rolling the surface

withlight roller make the surface smoothen and light watering the same

andmaintenance for 30 days or more till the grass establish properly, as

per direction of the officer-in-charge.

Finishing with Epoxy paint (two or more coats) at all locations

preparedand applied as per manufacturer's specifications including

appropriate priming coat, preparation of surface, etc. complete. For Steel

Reception Counter at Admin Block

Providing & fixing 12 mm thick clear toughened glass partition including

floor and ceiling channels, patch fittings, Fabrication, transportation,

erection and alignment of complete cabin structure. as per direction of

Providing and fixing aluminium work for doors, windows,

ventilatorsand partitions with extruded built up standard tubular

sections/appropriate Z sections and other sections of approved

makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners

ofrequired dia and size, including necessary filling up the gaps at

junctions, i.e. at top, bottom and sides with required EPDM

rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust

free,straight, mitred and jointed mechanically wherever required

includingcleat angle, Aluminium snap beading for glazing / paneling,

C.P.brass / stainless steel screws, all complete as per

architecturaldrawings and the directions of Engineer-in-charge. (Glazing,

panelingand dash fasteners to be paid for separately

Anodised aluminium (anodised transparent or dyed to required shade

3 21.1.1.1 according to IS: 1868, Minimum anodic coating of grade Kg 450 ₹ 495.05 ₹ 2,22,772.50

Providing & fixing double-leaf frameless toughened glass entrance door

4 NS (12 mm thick) with floor spring, patch fittings, locks and handles, MS Each 1 ₹ 2,85,525.00 ₹2,85,525.00

Channels etc. all complete. (Min. Size-1800mm)

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed

glazing and false ceiling including disposal of unserviceable materialand

stacking of serviceable material with in 50 meters lead as directed by

Engineer-in-charge

Digitally signed by JAYA

ELECTRICAL WORKS

Sl. No. DSR 2025 /MR Descriptions Unit Qty Amount (Rs.)

Electrical Works

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC

insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch,

modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper

conductor single core cable etc. as required.

Wiring for twin control light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single

core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box

and earthing the point with 1.5 sq.mm. FRLS/HFFR PVC insulated copper conductor single core cable etc

Wiring for light/ power plug with 2X4 sq.mm FRLS/HFFR PVC insulated copper conductor single core

11 1.5 cable in surface/ recessed steel conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper Meter 60 ₹ 480.00 28,800.00

conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS/HFFR PVC insulated copper conductor single

12 1.6 core cable in surface/ recessed steel conduit along with 2 Nos. 4 sq.mm FRLS/HFFR PVC insulated Meter 40 ₹ 724.00 28,960.00

copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC

13 1.7 insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box

including connections but excluding modular plate etc. as required.

63 1.24.4 3 pin 5/6 A socket outlet Each 2 ₹ 136.00 272.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding

modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess,

86 1.31 including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, Each 6 ₹ 545.00 3,270.00

connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess,

87 1.32 including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular Each 3 ₹ 659.00 1,977.00

switch, connections etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without

independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in

surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper

conductor single core cable etc. as required.

Digitally signed by JAYA

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V,

99 2.3 on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for

112 2.10 inductive load of following poles in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

117 2.10.5 Triple pole and neutral Each 1 ₹ 1,301.00 1,301.00

Supplying and fixing following rating, Double pole, (single phase and neutral), 240 volts, residual

125 2.14 current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete

with connections, testing and commissioning etc. as required

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal

133 2.18 enclosed plug top along with 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, Each 2 ₹ 1,806.00 3,612.00

with chained metal cover for the socket out let and complete with connections, testing and commissioning

etc. as required.

145 EARTHING -

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing

147 5.4 masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. Set 1 ₹ 8,351.00 8,351.00

with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode,

151 5.9 including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be Meter 20 ₹ 160.00 3,200.00

done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

166 LED LIGHT AND FAN

LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt )

Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/

Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as

per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-

270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal surge protection of 2.5 KV

with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80,UGR (Unified Glare Rating)

< 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum

50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K /4000°K / 5700°K /

6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption

should not more than the specified rating and Fixture shall be confirming to relevant BIS standards.

Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect

i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and

earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120

lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be

submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal

management: heat sink of aluminium housing such that LED junction temperature shall not rise above

Powder coated die cast /Extruded aluminium Body including trim

Digitally signed by JAYA

LED Batten light (System lumen efficacy ≥105 <120 lm/Watt).

Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body

material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver

efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 °C to

40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P.F.≥0.95,

IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of

minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K /

186 8.9 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power

consumption should not more than the specified rating and Fixture shall be of relevant BIS standard.

Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect

i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and

earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt

output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.

Shape size and CCT shall be as approved by Engineer-in Charge as per requirement. (Thermal

management: heat sink of aluminium housing such that LED junction temperature shall not rise above

LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥105

Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast

aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input

voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C,

internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per

IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as

per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement.,

suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with

70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K

/4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum

power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard

complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper

conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System

70 wattefficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED Each 3 ₹ 2,114.00 6,342.00

204 MV CABLE LAYING

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of

following size on cable tray as required.

221 10.8.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Metre 140 ₹ 53.00 7,420.00

226 MV CABLE JOINTING & END TERMINATION -

Supplying and making end termination with brass compression gland and aluminium lugs for

227 11.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as -

TOTAL AMOUNT AS PER DSR (Rs.) 6,67,060.00

TOTAL AMOUNT AS PER DSR (Rs.) 6,67,060.00

231 MR 1 Supply of ISI marked aluminium conductor XLPE insulated cable as per IS 7098, & cable, armoured,

served, sheathed 1100 volts grade.

232 MR SITC of 1*4 RECESS LED LIGHT including fitting and Fram, having 36 W, CCT 5700K, Each 12 ₹ 7,061.60 84,739.20

Digitally signed by JAYA

233 MR SITC of Outdoor type STRIP LED LIGHT FITTING Mtr 150 ₹ 143.00 21,450.00

Supply, Installation, Testing and Commissioning (SITC) of LED Post Top Light fitting complete with 45W

LED luminaire, minimum system efficacy ≥120 lm/W, CCT 4500K, CRI ≥80, IP66/IK08 protection,

pressure die-cast aluminium housing, UV-stabilized polycarbonate diffuser, surge protection of minimum

10 kV, THD <10%, Power Factor >0.95, suitable for operation on 140–270V AC, complete with driver and

234 MR all associated accessories. The fitting shall be mounted on a 3.0 m high hot-dip galvanized MS decorative Each 8 ₹ 30,725.00 2,45,800.00

tubular pole with minimum 50-micron galvanization, including base plate, anchor bolts, RCC foundation of

suitable size in M20 grade concrete, excavation, backfilling, cable entry arrangement, earthing with GI

pipe electrode, suitable PVC/GI junction box, all clamps, nuts, bolts, ferrules, connectors, painting/touch-

up, testing, commissioning and handing over complete as required.

Total of NSR items Rs. 3,65,062.00

Grand Total Amount Rs. 10,32,122.00

Grand Total Amount Rs. 10,32,122.00

Digitally signed by JAYA