PROVN OF LBW WORK FOR SATCOM ANTENNA AT OTM ACCN LAMBALINE UNDER GE BRICHGUNJ

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation over areas, not exceeding 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

Excavation over area, exceeding 1.5m but not exceeding 3m deep and getting out in soft/loose soil complete all as specified and directed.

Excavation over areas, exceeding 3m but not exceeding 4.5m deep and getting out in soft/loose soil complete all as specified and directed.

Material & Labour for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

Material & Labour for Reinforced cement concrete design mix M-30 as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Material & Labour for Reinforced cement concrete design mix M-30 as in columns, pillars, piers,posts and struts complete all as specified and directed.

Material & Labour for Reinforced cement concrete design mix M-30 as in beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified and directed.

Material & Labour for Reinforced cement concrete design mix M-30 as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in,shelves and the like complete all as specified and directed.

Use & waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces of concrete complete all as specified and directed.

Use & waste of Form work to sides of square or rectangular columns, pillars, posts and struts for fair finished surfaces of concrete complete all as specified and directed.

Use & waste of Form work to sides & soffits of beams, cantilevers, etc for fair finished flat surfaces of concrete complete all as specified and directed.

Use & waste of Form work to chajjas , soffits of roof slab and similar items including edges for fair finished flat surfaces of concrete complete all as specified and directed.

Supply & fixing Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply & fixing Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply & fixing Mild steel TMT bars 5mm over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Material and labour for pre-cast cement concrete block masonry with PCC 1:3:6,type C1(using 20mm graded stone aggregate) with solid blocks exc 10cm in width and set in CM (1:6) complete all as specified and directed.

Material and labour for rendering 15mm thick in two coats on faces of brick work or concrete surfaces; first coat (rendering coat) of 10 mm thick in cement mortar 1: 6 and second coat (finishing coat) of 5 mm thick in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed. at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Material and labour for hard core of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and labour PCC 1:4:8 type D-2 using 40 mm graded stone aggregate in 100mm thick as in sub base complete all as specified and directed..

Material and labour PCC 1:3:6 type B-2 using 40 mm graded stone aggregate in 100mm thick as in sub base complete all as specified and directed..

Material and labour for Factory made, machine pressed, M-35 grade concrete interlocking paver blocks, with grey cement and no pigment, any shape and size conforming to IS:15658-2006 of 60 mm thickness, with & including stone dust cushion and joints filled with sand complete all as specified and directed..( Cost of Sand will be measured and paid separately)

Material and labour for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

KVR INFRA

ASW ENTERPRISES

M/S J P Construction

SRI MAHALAKSHMI CONSTRUCTIONS