Repair and Maintenance Work of UDA Quarter D-1, Moti Magri. 1709

Item Code [12.43.1 BSR2022]:Item Type [building] :: Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision . New work

Item Code [2022 12.22.1 Putty]:Item Type [building] :: Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete. New Plastered Surface (three or more coats)

Item Code [2022 13.1]:Item Type [building] :: Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand)

Item Code [2022 3.16.3]:Item Type [building] :: P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia

Item Code [BSR2022 16.1.2.1]:Item Type [building] :: Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately).For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately).Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer)

Item Code [BSR2022 16.5.2]:Item Type [building] :: Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm).

Item Code [BSR2022 5.2.1]:Item Type [building] :: Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in.Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Item Code [BSR2022 8.13.3.3 ]:Item Type [building] :: Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure A .35 mm thick Decorative teak veneer both side

Item Code [Glazed Tiles China Mosaic]:Item Type [building] :: Providing and laying 25 to 35 mm size glazed tiles thickness 5mm pieces for roof treatment having colour and shade as approved by the engineer in charge over 25 mm thick layer of cement mortar mix 1:4 prepared with 1% solution of water proof compound with application of cement slurry including finishing of joints with white cement and curing etc. complete in all respect. washing with acid. with all lead and lift.

Item Code [S 2022 2.26]:Item Type [building] :: Sub Item Code [S 2022 2.26 + 2.26.5]: P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 litres capacity