REPAIR/MAINT TO CHEQUERED TILING, CHAIN LINK FENCING, DRAINAGE, FOOT PATH ETC AT TAJ VIEW ENCLAVE OTM AND MD ACCNS, ENGRS UNITS, ASHA SCHOOL AND CERTAIN PLACES IN THE AOR OF AGE B/R-I UNDER GE (EAST) AGRA

Amount

Excavation of post holes each not exc 0.50 cum and getting out in soft and loose soils, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm , watering and removing surplus soils to a distance not exc 50 m and making good surfaces.

S&F in repair galvanised ,2 srand steel barbed wire 2.24mm dia barbed with 2mm dia barsbs at 75mm spacibg and straining and fixing to any type of standard rail straining bolts incl, securing or tying at crossing with and provision of galvanised mild steeled wire staples or steel pins etc complete all as specified and directed. Note : Each line shall be measured including taking down existing barbed wire.

Restraining resecuring including making good staples etc. old galvanised steel barbed wire with galvanised mild steeled wire staples or steel pins etc complete all as specified and directed.

Supply only GI chain link fencing (2.4kg/sqm)including line wires to any type of standards, rails, straining bolts, etc. complete all as specified and directed. Note :- Line wire and flat iron shall be measured and paid separately

Fixing only GI chain link fencing including line wires to any type of standards, rails, straining bolts, etc. including provission of flat iron for securing with post and taking down existing chain link fencing complete all as specified and directed. Note :- Line wire and flat iron will be measured and paid separately

S&FMild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fittedwith washers and one hexagonal or square nut, exc 5cm but n exc 10cm long and 16 to 20 mm diameter of neck complete all as specified and directed.

Supply only mild steel in flat , round or square bars in available length confirming to Fe-410-W(Gde-E-250) complete all as specified and directed.

S &F of Mild steel round bars Fe 290 (Gde - E-165)10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n exc 15cm thickness (below or above the ground level) built in cement mortar complete all as specified and directed.

M&L for cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.

M&L for providing pre-cast RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in cover slabs (for manholes and drains) including necessary form work set in CM 1:4 complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately)

M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n exc 200mm thick (Horizantal or sloping ) for flat for finished surfaces complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise poivided complete all as specified and directed.

S & F angle iron as in post and struts in fencing including embedding in concrete, cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., simillar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for two coat of sythetic enamel paint over one coat of red oxide primer on new steel surfaces of any description ,over 10cm in width or girth not otherwise described including preperation of surface complete all as specified and directed.

M&L for one coat of sythetic enamel paint on previously treated/ un treated old steel surfaces of any description ,over 10cm in width or girth not otherwise described including preperation of surface complete all as specified and directed.

Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for brick work with subclass B bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L, rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surface and finishing surface fair and even complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of cement base paint overa coat of primer complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying three coats of white wash paint complete all as specified and directed.

M&L for preparing old plastered surfaces of wall and applying two coats of white wash complete all as specified and directed.

M&L for preparing old plastered surfaces of wall and applying one coat of white wash complete all as specified and directed.

M&L for preparing old plastered surfaces of wall and applying one coats of cement base paint complete all as specified and directed.

M & L for applying one coats of Acrylic weather proof Exterior paint (Apex paint) on old plastered or unplastered surfaces of walls or concrete including preparation of surfaces at any height (not.exc8 mtr) complete all as specified and directed.

M&L for PCC 1:2:4 type B2 (20mm graded Agg) 40mm thick as in surface channel and drains manhole etc complete all as specified and directed.

Providing cement concrete Type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for 75 mm thick Cement concrete type D-2 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing finishing surface even and rough using broomfinish complete all as specified and directed.

M&L for Chequered cementconcrete tiles 20cm x20cm x 25mm thick,set, jointed and pointed in neat cementslurry in floors over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

jmd engineers

PARIWAR INFRATECH

M/S RISHI RAJ AGRAWAL

M/S KAMAKHYA CONTRACTORS

M/S SHARADA ASOCIATE

Asha Construction

JWALA ELECTRIC CONTRACTORS

M/s Kok Singh Sisodia