Fabrication and fixing in position stainless steel benches and removing old RCC benches at various locations in Anushaktinagar and Mandala Township, Mumbai.

Amount

ABSTRACT SHEET

Part A : Main Items

Description of Work / Item(s)

Amount

Part A : Main Items

Providing, fabricating and fixing stainless steel Grade 304, S. S. Benches of approved size, 3 seater by using 1.2 mm thick perforated S. S. sheet /SS Rectangular Hollow Sections/ SS Tubes/SS Benches style arm 32 mm dia tube 1.2 mm thick, S. S. nut/bolts, legs & supporting beam cross section 40 mm x 80 mm, 2 mm thick S. S. tube for chairs with S. S. suface mirror finished standard type for outdoor use and fixing in cement concrete 1:2:4 for pedestal of size 750 mm x 450 mm x 450 mm. The rate shall be inclusive of all labours, materials and transportation to site of approved make etc all complete as per direction of Engineer-in-Charge. (The excavation and cement concrete will be measured under relevent item separately.)

Providing, fabricating and fixing stainless steel Grade 304, 18 SWG Dustbin of approved size (perforated) with supporting 2.5" dia and 42" height, S.S. pipe with suitable mounting plates & push to open type flap cover and hotizontal bracing of 1" dia s.s. pipe excluding earth work excavation, providig and laying cement concrete 1:2:4 for pedestal of size 450 x 450 x 450mm fixing supporting pipe with GI anchor fastner 10mm dia inside concrete pedestals, curing, cleaning the site etc. compelte all as per specifications and as directed by the Engineer-in-Charge. (The excavation and cement concrete will be measured under relevent item separately)

Depth not exceeding 1.50m from ground level.

Providing and laying in position cement concrete of 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) including mixing, consolidation, finishing, curing, formwork etc. complete all as per specifications and as directed by the Engineer-in-Charge.

Demolishing & dismanteling of C.C / R.C.C works benches at all levels with out damaging adjacent structures and disposal of dismantled materials within the colony at specified location etc. complete all as per specifications and as directed by the Engineer-in-Charge.

Providing and laying cement concrete chequered / patterned tiles 300 X 300 mm X 30 mm thick of approved make including levelling, curing, finisihing and cleaning etc. complete to obtain required finish complete on 20 mm thick bed of cement mortar 1:4 (using crushed sand) as per specifications and drawings complete as directed by the Engineer-in-charge

Providing and laying dry rubble stonehard core soling of followingconsolidated thickness in sub base tofloor and in plinth protection torequired levels and lines with blacktrap stone, hand set, well packedincluding filling the interstices withsmaller stone chips of approvedquality, supplying & finishing /blinding the surfaces with approvedblinding quality murrum/ stone dustincluding watering, consolidation etc.complete as per specification drawings& as directed by Engineer in charge. (Quoted rates shall include the cost of filling materials of smaller stone chips and murrum/stone dust etc.)

150mm consolidated thickness.