Augmentation of Water Supply Scheme Daleri (MH/PC), Block Bhikhiwind, Distt. Tarn Taran. Under Nabard-XXIII. Pakage No. DWSS-W-DIV9-7576-1

Amount

Boring with casing pipe for tubewell in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tubewellis lowered & tested, equipment as required such as hand boring machine and its accessory,transportationton site and vice versa etc. complete in all respect.

(c) Boring with 250mm id Housing Pipe 0 to 150 m

Extra for boring beyond 150mtr. Depth

Supplying, lowering of MS Pipe as per IS: 4270-2001 including MS sockets having dimensions as per IS code duly welded with MS electrode to have extra strength to lower the pipe into tubewell bore.

(d) 200 mm nominal diameter (weight 41.6 kg per meter) 8 mm thickness

Supplying, lowering of Stainless Steel Cage type wire wound screen as per IS: 8110-2000 or latest ISI marked Duly welded with suitable grade S.S welding electrode to lower the strainer into tubewell bore.

200 mm internal diameter (slot size 0.15mm) 6.30 mm thickness

Supplying, Lowering & fixing of M.S. special socket to connect S.S. Strainer to M.S. Pipe duly welded with suitable grade welding electrode complete in all respect.

(c) 200 mm internal diameter

Supplying, Lowering & fixing of stainless steel socket as per IS 8110-2000 or latest ISI marked duly welded with suitable grade SS welding electrode to lower the strainer into T/Well bore complete in all respect.

( b)200 mm i/d

Supplying at site Wooden box of suitable size with Lid & locking arrangment for preserving strata sample collected from the bore.

Collection of water sample from different strata and testing of sample from approved laboratory (Physical & chemical Analysis)

Supplying and fixing M.S well cap having thread to fix on housing pipe complete in all respect

(c) 200 mm internal diameter

Supplying & fixing of bail plug of M.S. pipe complete with inverted U-hook attached to the bottom plug complete in all respect.

(c) 200mm internal diameter (weight 41.6 kg per meter) 8.00 mm thickness

Supplying & fixing of M.S. Clamp of size 150mm x 12mm made out of MS Flat 1.52 m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect.

Development of stabillizing of the tubewell with air compressor of required capacity as directed by the engineer-in-charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.

(a) Capacity of Air compressor 550 cfm at 600 PSI

Development of stabillizing of the tubewell with submersible pump of required capacity as directed by the engineer-in-charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.

Testing of water sample for Heavy metal from approved laboratory (Toxic material such as Arsenic, lead, mercury, pesticide etc.)

Repair of OHSR

Providing and fixing Steel ladder of top dome

Providing and fixing Alluminium ladder in side dome

Providing & fixing new autmatic gauge complete in all respect.

Ventilator

Repair of expansion joint and man hole cover.

Dr Fixel for inside Water Tank with Labour

Providing & fixing of Sluice Valve 80 mm complete in all respect

Providing & fixing of Sluice Valve 100 mm complete in all respect

Sacffolding with Labour

Pipe painting

Providing and fixing Railing

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications

160mm o/d pipe of 10 Kg/cm2 lines laid complete

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge)

Providing, Fixing & jointing Cast Iron Surface box for Sluice Valve, Air Valve, Fire hydrant etc. including all carriages complete

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department size 0.90m x 0.90m Including Carriage

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Manually) (6kgf/cm2) (excavation & including specials)

PVC pipe 63mm o/d

PVC pipe 90mm o/d

PVC pipe 110mm o/d

PVC pipe 160mm o/d

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Mechnically) (6kgf/cm2) (excavation & including specials)

PVC pipe 63mm o/d

PVC pipe 90mm o/d

PVC pipe 110mm o/d

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.

PVC pipe 63mm o/d

PVC pipe 90mm o/d

Dismentalling of Mettaled roads and back filling with excavated earth and fully compacted only

PVC pipe 63mm o/d

PVC pipe 90mm o/d

PVC pipe 110mm o/d

PVC pipe 160mm o/d

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge)

Providing, Fixing & jointing ISI Marked Gun-metal peet valve(Heavy pattern) as per IS 778 with hand wheels,on Gi pipe line laid in the ground or inside building including carriage complete in all respects. 50mm i/d Gun metal peet valve heavy pattern

Providing, Fixing & jointing Cast Iron Surface box for Sluice Valve, Air Valve, Fire hydrant etc. including all carriages complete in all respects

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department 13 No. With each of Size 0.6m x 0.6m Including Carriage

Bailing out water from the trenches for making new connections in existing pipe lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the Engineer-in- Charge including cost of specials9PVC to PVC)

Providing & Fixing One No. Bulk Meter inside pump chamber inlcluding rubber joint, nut bolt and other required accessories code 4064-2005 complete in all respect

Providing proposed water connection with to household up to Wall with providing, laying, jointing, testing GI pipe lines 15 mm i/d = 2.50 mtr. , B-Class as per CSR 28.36 (A) , (Above ground level) , Providing & fixing MDPE pipe 15 mm i/d with specials 2.00 mtr. (Below GL), including cost of special such as tees, bends, sockets, elbow, peet valve, union, nipples and hocks etc, cutting, threading and testing in trenches in the ground and ISI 15 mm i/d GM ferrule as per IS" 2692 and 3" i/d clamp with C..I. bib cock, 15 mm i/d as per IS " 210 with stainless steel spindle of approved make as per CSR 30.65 (b) Complete in all Respect

Providing & Installing Testing & Commissioning of One No. Electrically driven diaphragm opreated metering system chemical dosing chlorinator suitable for for delivering 0.5 to 6 liters of Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg/cm2 and suction left not less than 1.5 mtr., as per DWSS standard specifations.

Repair of Pump Chamber

Congolmerate floor 50mm thick cement concrete 1:2:4 on 100mm cement concrete 1:8:16 and 100mm sand or stone filling.

Congolmerate floor 40mm thick cement concrete 1:2:4 on 100mm cement concrete 1:8:16 and 100mm sand or stone filling for plinth protection.

Hollock wood doors window shutter including Hinges, Screws, Chocks Cleats, Stops and Cords etc. complete fixed in position (double Leaf) @ Paneled glazed or glazed and paneled 40 mm thick

Applying of pink primer or aluminum primer coat including preparation of surface. (with special quality paint)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. (With special quality paint)

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work

Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS:14935 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-incharge. (If fixed on wall face clamp to be paid separatly as per respective item)

Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.

Supply & Fixing of pressed steel frames (Chowkats) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section(standard design latest) including iron lugs (hold fasts) iron hinges, confirming to P.W.D. specifications including bolts for fixing stops, locknotch provision for receiving tower bolts,Hydraulic spring and finished with one priming coat of approved quality, fixed in position, including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete.

Wrought iron and mild steel grills (made of 20mm wide and 5mm thick flat)

Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15cum layers including ramming watering and consolidating lead upto 30 meters.

White washing 3 coats inside of pump chamber

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete.

Distempering with dry distemper of approved manufacture two coats over one priming coat to give an even shade.

Finishing wall with exterior decorative cement based paint such as snowcem robbiacem etc. on new work two coats to give on oven shade.

Providing & fixing of glass strips in floor 4mm thick (a) 50mm wide

(b) 40mm wide

Prov. & fixing C.I. steps duly I.S.I. marked wt. @4.50kg/each step

Providing & Installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed Make capable of delivering 255 LPM against a head of 70 mtr along with electric panel board consisting of electric appliances such as automatic Star Delta Push Button or oil immersed Starter, Main Switch, VM, Ampere Meter, ELCB, Shunt Capacitor, Single Phase preventer, Indicating Lamps, Kit-Kat etc. including G.I. Column Pipe of suitable size 80 mm =50 mtr (in 3 mtr lengths each with flanges , screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable (reputed make) complete in all respects as per standard Specifications.

Cost of pumping set 255 LPM Head 70 mtr.)

Cost of lowering (with length) G.I Column Pipe 50 mm i/d

Cost of submersible cable (with length) 2.5mm² B-class

Cost of pannel board

C.I FITTING INSIDE PUMP CHAMBER Providing and installing 150mm dia delivery main (From Tube well to Duck Foot bend including cost of C.I/D.F Pipes, D/F Sluice valves, D/F NRV & Specials as C.I Bends, Tail Piece Tees etc.. inside the pump chamber as per standard design complete in all respects

Development of Water Works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing . (including carriage)

Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing (including carriage)

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing . (including carriage)

Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing . (including carriage)

Construction of masonry gate pillar including cost of MS Steel Gate size 1.22mtr x 1.37 mtr as per standard Drawing with including & Analysis complete in all respects (including carriage)

Construction of Cement Concrete, Foot Path with masonry toe wall & earth filling inside water works as per standard Drawing D-7. (including carriage)

Providing & fixing MS Sign Board as per standard size of DWSS as per Drawing D-20 (including carriage)

Environmental

Making lawns including ploughing & dragging with 'Sohaga' breaking of clods, removal of earth rubbish dressing & Supplying doob grass roots and planting at 15 cm. apart including Supplying and spreading of farm yard manure@ 0.18 cum per 100 sqm & loosening.

Supplying and Planting prmanent trees including digging of eirth pits size 75x75x75 cm deep refilling the excavated eirth with manure supplyed @0.113cum each and watring supplying through tractor tanker(trees like Neem, Ashoka, Dake, arjun etc.)

Planting ground cover plants including digging and refilling of beds with excavated soil and FYM, Fertilizer and insecticides, planting of saplings at 30cm distance from plant to plant and row to row, providing and fixing brick tiles edging.

Planting, flower beds including digging and refilling of beds with excavated soil and FYM, fertilizer and insecticides, plating of sapling at 30cm distance from plant to plat and row to row.

Provision for one way stand post with khura complete in all recpect.

SARBJIT SINGH CONTRACTOR