REPAIR AND MAINT TO INTERNAL ELECTRIFICATION WORK INCERTAIN BLDGS AT 10 SECT RR AND 29 RR AT PATTANGARRISON UNDER AGE (I) CIF (K)

Amount

Taking down carefully copper/aluminium point wiring (light, fan, light & power socket) complete with fittings and fixtures such as switches,ceiling rose ,pendents ,regulators,socket,lamp holders brackets,bulk head fitting, etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and also making good distrubed surfaces of wall,floors etc, complete all as specified and directed by the Engineer-in-Charge.

Taking down old unserviceable Distribution board or main switches of any type and size including fuses, MCB's etc after removing all connections and making good the disturb surface, complete all as specified and directed by the Engineer-in-Charge.

Point wiring with 1.5 sqmm copper conductor (Multistranded) PVC insulated and unsheatheted FRLS electric cable 1100 volts grade and including PVC casing caping/conduit pipe of suitable size with all fittings accessories and including PVC insulated electric cable 1100 volts, 1.5 sqmm (multi stranded) copper conductor single core (Green colour) cable as continious earth wire connected to common earth dolly including sunk sheet terminal box made out of 1.6 mm thick MS sheet concealed on wall or on surface as per site requirement and making good distrubed surface of wall ,covered with 3 mm thick plastic laminated for mounting of switches, socket, fan regulators etc., complete all as specified and directed by the Engineer-in-Charge for the following:-

One light /fan/bell point controlled by one No, one way 5 Amps switch. complete all as specified and as directed by the Engineer-in-Charge.

One 3/5 pin socket outlet, 5 Amp, independent, controlled by one No. one way switch on independent board, complete all as specified and as directed by the Engineer-in-Charge.

One 3/5 pin socket outlet, 5 Amp controlled by one No, one way switch on same board, complete all as specified and as directed by Engineer-in-Charge.

One bell/buzzer point controlled by one bell switch 5 Amp, complete all as specified and as directed by the Engineer-in-Charge.

One light point controlled by two Nos ,2 way 5 Amps switchs, complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 3 here-in-before ,but for one socket out let 15 Amp on the independent board with 2.5 sqmm copper conductor multistranded PVC insulated and unsheathed electric cable 1100 volts (ISI MARKED) including PVC insulated and unsheathed electric cable 1100 volts, 2.5 sqmm copper stranded conductor as continious earth wire connected to common earth dolly, complete all as specified and as directed by the Engineer-in-Charge.

Piano type switch one way, SP, flush type, 5 Amps, 230 volts AC, 50 Hz, complete all as specified and as directed by the Engineer-in-Charge.

Piano type switch socket combination, flush type, 5 in 1, 15 Amps, 230 volts AC, 50 Hz, multipurpose type, complete all as specified and as directed by the Engineer-in-Charge.

Modular Socket 6A/16 A, 2/3 Pin combined 2 Module, complete all as specified and as directed by the Engineer-in-Charge.

Modular Switch 1 Way 16 Amp ,1 Module, complete all as specified and as directed by the Engineer-in-Charge.

Piano type switch two way, SP, flush type, 5 Amps, 230 volts AC, 50 Hz, complete all as specified and as directed by the Engineer-in-Charge.

Piano type bell push switch, one way, SP, flush type, 5 Amps, 230 volts AC, 50 Hz, complete all as specified and as directed by the Engineer-in-Charge.

Bell AC, 230 Volt, single Pole, complete all as specified and as directed by the Engineer-in-Charge.

Piano type socket outlet, flush type, 2 in 1, 3 pin, 5 Amps, 230 volts AC, 50 Hz, complete all as specified and as directed by the Engineer-in-Charge.

Replacement of existing Sheet metal enclosure DB with new Sheet metal enclosure factory made (double door) shutter type for MCB DB SPN, 240 Volts, 8 ways with 200 Amps rated bus bar, neutral link, earth bar, complete all as specified and as directed by the Engineer-in-Charge.

Replacement of existing Sheet metal enclosure DB with new Sheet metal enclosure factory made (double door) shutter type for MCB DB SPN, 240 Volts, 4 ways with 200 Amps rated bus bar, neutral link, earth bar, complete all as specified and as directed by Engineer-in-Charge.

MCB TPN, 100 Amps, 4 pole, 230 volts, 10 KA rupturing capacity, 'C' curve type, including taking down old existing, complete all as specified and as directed by the Engineer-in-Charge.

MCB TPN, 32 Amps, 4 pole, 230 volts, 10 KA rupturing capacity, 'C' curve type, including taking down old existing, complete all as specified and as directed by the Engineer-in-Charge.

MCB SPN, 63 Amps, 230 volts, 10 KA rupturing capacity, 'C' curve type, including taking down old existing, complete all as specified and as directed by the Engineer-in-Charge.

MCB SPN, 32 Amps, 230 volts, 10 KA rupturing capacity, 'C' curve type, including taking down old existing, complete all as specified and as directed by the Engineer-in-Charge.

MCB SP, 5 -32 Amps, 230 volts, 10 KA rupturing capacity, 'C' curve type, including taking down old existing, complete all as specified and as directed by the Engineer-in-Charge.

Ceiling rose surface type, 65 mm x 50 mm three terminals/PVC/polycarbonate, isolated body fixed on PVC block,complete all as specified and as directed by the Engineer-in-Charge.

Electronic dimmers, 450W, 250V flush type on the exiting phenolic laminated sheet etc. as requried, complete all as specified and as directed by the Engineer-in-Charge.

LED light fitting 1x9W/1x10 W Bulkhead luminaires including LED light driver holder and making of electrical connection with and including three core flexible copper conductor cable of suitable size, including taking down existing old unserviceable, complete all as specified and as directed by the Engineer-in-Charge. Make : Havells Cat part No LHEXCGP7UN5WO13 or equivalent in /Bajaj/Philips

LED light fitting 1x20 Watt ,220 V, AC, decorative box type with driver ,holder including LED tube light and making of electrical connection with and including three core flexible copper conductor cable of suitable size from ceiling rose, including taking down existing old unserviceable, complete all as specified and as directed by the Engineer-in-Charge. Make : Havells Cat part No LUMININEBS20WLED865SPCWH or equivalent in /Bajaj/Philips

LED light fitting (warm white type) 1x20 watt, 220 V, AC, decorative box type with driver, holder including tube light and making of electrical connection with and including three core flexible copper conductor cable of suitable size, including taking down existing old unserviceable, complete all as specified and as directed by the Engineer-in-Charge. Make : Havells Cat part No LHEXAWP5IN1W020 or equivalent in /Bajaj/Philips

Edgepro round slim-fit low profile downlights are engineered to deliver superior light output and uniformity utilising the latest edge-lit LED technology.An ideal solution where ceiling voids are limited but high lumen output 12Watt LED and making of electrical connection with and including three core flexible copper conductor cable of suitable size, including taking down existing old unserviceable, complete all as specified and as directed by the Engineer-in-Charge. Make: Havells Cat No- EDGEPRORDDLR12WLED857S or equivalent in Bajaj/Crompton Greaves/Phillips

Post top lantern LED Type 15 watt 230 Volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 with impact and corrosion resistant complete with driver and lamp and making of electrical connection with and including three core flexible copper conductor cable of suitable size, including taking down existing old unserviceable, complete all as specified and as directed by the Engineer-in-Charge. Make :- Havells Cat No- RUBYMINIPT15WLED830PSYMTOPC or equivalent in Bajaj/Crompton Greaves/Phillips

Replacement of existing Lamp holder with new Lamp holder PVC polycarbonate type with back plate and providing LED 9 Watt lamp , complete all as specified and as directed by the Engineer-in-Charge. Make:- Crompton Cat Part No. LED-9WDF/CDL-BI or equivalent in Bajaj/Havells/Philips.

Replacement of existing LED bulb 9 watts with new LED bulb 9 watts , complete all as specified and directed by the Engineer-in-Charge. Make:- Philips/CG/Wipro.

Replacement of existing worm white type LED bulb 18 watts with new worm white type LED bulb 18 watts, complete all as specified and directed by the Engineer-in-Charge. Make:- Philips/CG/Wipro.

Replacement of submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 4 sqmm complete drawn in and including casing caping/PVC conduit ISI marked of suitable size and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface, complete all as specified and directed by the Engineer- in-Charge. Note :- 2 +1 run of 4Sqmm cable including casing caping/PVC conduit of suitable size shall be measured as one running metre.

Note :- An amount of Rs. 13,441.00.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S SHEIKH FEROOZ AHMAD

M/S FAYAZ AHMAD BHAT

JK BUILDERS AND ENGINEERS

M/S ZAHOOR ENTERPRISES