Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹10.5 LAccepted-AOC AT KUCHANA POST KUCHANA TAH BHADRAWATI DISTRICT CHANDRAPUR MS 442503 | CHANDRAPUR | MAHARASHTRA | 442503 | ₹10.5 L Quoted ₹8.9 L | L-1 | Accepted-AOC The work is being awarded to the L-1 bidder, RAJESH KUMAR SINGH, vide Reference No. SECL/GM/KSM/C/26-27/397 dated 07/08/2026. |
| 2 | L-2₹9.4 L+₹48,619.96 (5.45%)Rejected-Finance | ₹9.4 L+₹48,619.96 (5.45%) | L-2 | Rejected-Finance Rejected not being L-1 bidder. |
| 3 | L-3₹9.5 L+₹54,553.24 (6.12%)Rejected-Finance | ₹9.5 L+₹54,553.24 (6.12%) | L-3 | Rejected-Finance Rejected not being L-1 bidder. |
| 4 | L-4₹9.9 L+₹97,734.36 (11.0%)Rejected-Finance NEAR GAYATRI MANDIR ADARSH NAGAR KUSMUNDA KORBA CG 495454 | KORBA | CHHATTISGARH | 495454 | ₹9.9 L+₹97,734.36 (11.0%) | L-4 | Rejected-Finance Rejected not being L-1 bidder. |
| 5 | L-5₹10.1 L+₹1.1 L (12.8%)Rejected-Finance DIPKA KATGHORA KORBA 495452 | KORBA | CHHATTISGARH | 495452 | ₹10.1 L+₹1.1 L (12.8%) | L-5 | Rejected-Finance Rejected not being L-1 bidder. |
Tender Value
₹19.4 L
EMD Value
₹24,400
Closing Date
7 May 2026, 5:00 pmClosed
STAFF OFFICER (CIVIL), SECL KUSMUNDA AREA
OFFICE OF THE STAFF OFFICER (CIVIL), SECL KUSMUNDA AREA P.O. KUSMUNDA COLLIERY 495454 DISTT. KORBA (CG) CONTACT No. 8269842001
Providing and fixing of Profile sheeting work at roof of VVIP Guest House of Kusmunda Area.
2026_SECL_358694_1
SECL/GM/KSM/CIVIL/e-Tender /26-27/20 dt 23/04/2026
Open Tender
Civil Works - Others
Percentage
60 days
KUSMUNDA AREA, SECL
AS PER NIT and TENDER DOCUMENT
3 documents required · 3 mandatory
₹24,400
7 Aug 2026
25 Apr 2026
8 May 2026
27 Apr 2026
7 May 2026
27 Apr 2026
27 Apr 2026 - 30 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Item Description / Heading | |||||
| 1.01 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes | 7,586 | kg | 122.6 | ₹9,30,043.6 |
| 1.02 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | 91.2 | kg | 81.2 | ₹7,405.44 |
| 1.03 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 502.7 | kg | 95.15 | ₹47,832.38 |
| 1.04 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 1,007 | sqm | 607.8 | ₹6,12,054.6 |
| 1.05 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1.54 | cum | 6,993 | ₹10,762.23 |
| 1.06 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts | 20.52 | sqm | 649.85 | ₹13,334.92 |
| 1.07 | Painting on structural steel works two or more coats with approved brand synthetic enamel paint all complete work as per instruction of the Engineer-In-Charge. | 8.09 | MT | 1,510.55 | ₹12,218.39 |
| 1.08 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos Cement sheet | 180 | sqm | 47.8 | ₹8,604 |
| 1.09 | Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, angles, tees and flats | 2,248.4 | kg | 1.45 | ₹3,260.18 |
stage.html
html • 0.06 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_371575.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.33 MB
Tendernotice_2.pdf
PDF • 1.99 MB
Tendernotice_3.pdf
PDF • 0.60 MB
BOQ_371575.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .