NIT No GE/ND-42/2025-26

Amount

M&L for checking the leakage, blockage and petty repairs to bib taps, Pillar taps, Stop cock, Conceled stop cock, angle valves, gate valves etc of any description or size for stopping leakage of water by changing washers, etc complete all as specified and directed. NOTE : Fixtures/Fittings complete fixture shall be paid under relevant item against supply only and The rates quoted by the contractor are deemed to inclusive of Dhaga/safeda/PVC washers Note- (a) If necessiated by the Engr-in-charge/GE for work on Sunday/ holidays, the contractor shall provide skilled tradesmen. (b) Contractor Proper records (date wise) of complaints received & rectified by them and responsible to take care to complaint register, complaint slip from 9 AM to 5 PM per day other wise shall be penalised @ Rs.100/- per complaint if he fails to attend the complaint with in 6 hours as per complaint register which is kept in complaint cell. (c) Contractor arrengement skilled trademan, adiquate manpowers during execution of internal and external plumbing works including all safety precaution, scaffolding, standing pads, with all safety measures as per Govt guide linse and rules up to fourth storey of building in DAD Coplex Panchwati. Rate shall be quoted accordingly, keeping in mind above said all provisions.

Supply only chromium plated fancy type bib tap long body with flange fixed in 15mm bore of pipe, cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and directed.

Supply only Chromiumfancy type plated Pillar tap 15 mm bore cast copper alloy with capstan heads chromium plated screwed down high pressure screwed in iron pipe complete all as specified and directed.

Supply only ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball for 15/20 mm dia iron pipe (Minimum weight 142gms) complete all as specified and directed.

Supply only PVC connection 15 mm dia 45 cm/60cm long with 2 Nos PVC check nuts with washer complete all as specified and directed.

Supply only chromium plated fancy type Stop valve cast copper alloy, screwed down both, high pressure, with crutch or butterfly handle, screwed both end fixed, 15mm internal bore complete all as specified and directed.

Supply only for Brass chromium plated shower rose with swivel joints, 125 mm dia with CP neck including fixing to steel pipe or union 15 mm nominal bore complete all as specified and directed.

Supply only brass jumper washer, brass head, face and spindle for bib cock/ pillar cock/ stop cock 15 mm bore any type complete all as specified and directed by Engg in charge.

Supply only 15mm dia stop valve concealed type cast copper alloy, screwed down, high pressure chromium plated with long shank including making good dismantled portion complete all as specified and directed.

Supply only 32 mm dia PVC waste pipe for WHB & sink, 60 cm long with union complete all as specified and directed.

Supply only waste fittings brass chromium plated 32 mm dia for wash hand basin complete all as specified and directed.

Supply only waste fittings brass chromium plated 40 mm to 50 mm dia for stainless steel sink complete all as specified and directed.

Supply only brass CP towel rail 60Cm long complete all as specified and directed. Make-Prayag /Cera/Parryware

Supply only gun metal globe or gate valve 'ISI' MARKED, with iron wheel head screwed both ends and for iron pipes and fixed for bore of pipe 25 mm complete all as specified and directed.

Supply only small fittings galvanised iron 'medium grade' such as socket, elbow, nipple of any length upto 150mm long, Tee, union etc for 15 mm bore pipe (ISI marked) complete all as specified and directed.

Supply only small fittings galvanised iron 'medium grade' such as socket, elbow, nipple of any length upto 150mm long, Tee, union etc for 20 mm bore pipe (ISI marked) complete all as specified and directed.

Supply only CI bracket of exiting size, for WHB or Kitchen Sink etc including cutting, necessary fitments for pinning in brackets complete all as specified and directed.

Supply only 10 ltrs capacity PVC Low level flushing cistern including PVC syphon and float valve with float, PVC long bend for out let connection of cistern with WC complete fixing and connecting bend with WC complete all as specified and directed.

Supply only PVC polyplast float valve for cistern tank complete all as specified and directed.(Make : As per sample).

Supply only plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium anodised hinging device complete all as specified and directed.

Supply only CP Health faucet for Europeon type WC with 1.5m long pipe as per approved sample complete all as specified and directed.

Supply only, CP grating 127 mm dia with/without hole round, fixed on floor / nahani trap, fixed with cement mortar(1:3) complete all as specified and directed.

M&L for petty repairs to joinerys works, such as easing/ adjusting of door, repairs of wire mesh, cub board shutters, iron mongerys, of any type or description and any type of carpentery works etc Easing of window shutters/CB shutters (One unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening , tightening of hinges or changing the position of hinges, adjustement of tower bolt,s sliding bolt etc complete all as specified and directed by Engg in charge. Note: The rate quoted by the contractors is deemed to include the necessary tools and plants, screws, nails etc. Note- (a) If necessiated by the Engr-in-charge/GE for work on Sunday/ holidays, the contractor shall provide skilled tradesmen. (b) Contractor Proper records (date wise) of complaints received & rectified by the them and responsible to take care to complaint register, complaint slip from 9 AM to 5 PM per day other wise shall be penalised @ Rs.100/- per complaint if he fails to attend the complaint with in 6 hours as per complaint register which is kept in complaint cell. (c) Contractor arrengement skilled trademan, adiquate manpowers during execution of internal and external plumbing works including all safety precaution, scaffolding, standing pads, with all safety measures as per Govt guide linse and rules up to fourth storey of building. Rate shall be quoted accordingly, keeping in mind above said all provisions.

Supply only SS handles, stove enamelled black, 125 mm long complete all as specified and directed.

Supply only SS barrel tower bolt, stove enamelled black 200mm long complete all as specified and directed.

Supply only 100 mm long SS butt hinges 'medium weight' cold rolled welded to steel frame work complete all as specified and directed.

Supply only 100 mm size butt hinges of stainless steel medium weight complete all as specified and directed.

Supply only SS sliding door bolts 250 mm long clip type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified and directed.

Supply only 200 mm long SS barrel tower bolt of extruded section complete all as specified and directed.

Supply only SS locking bolt 100MM of extruded section for WC/ Bath doors complete all as specified and directed.

Supply only floor door stopper 140 mm of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repair stainless steel sink of size 914x460x203mm with bowl size 405x354x203mm. with drainage board of 1 mm thick sheet for kitchen with plug washer, waste pipe, cast iron cantilever brackets connecting union, fixed in position complete all as specified and directed.

S&F in repairs stainless steel sink of size510x430mm with bowl size 428x380x200mm with out drainage board made out of ,304 grade Stainless steel,1.00 mm thick sheet for kitchen with cantilevers connecting union complete all as specified and directed.

S&F in repair 1.00mm thick stainless steel plate rack overall size (31X36X10 inch) fixed with steel screws complete all as specified and directed.

S&F in repair vitreous china wash basin white flat back size 550 x 400 mm including brass chromium plated waste coupling for WHB with long screwed and shanks and fly nuts, flanged end bedded in red lead and other end fixed, PVC waste pipe, 32mm dia ,med grade, pipe with fittings fixed in wall connected to floor trap for drain out, complete including provision of pair or bracket of angle iron 35x35x6mm duly painted with two coat of synthetic enamel paint over one coat of red oxide zinc chromate primer and embedded one end of bracket in PCC 1:2:4 type B-1 bed blocks and cutting for and pinning in ends of brackets in walls and making good complete all as specified and directed.

M&L for manual Sealing of traps,WCs (manually) with neat cement paste after removal of water from it, to prevent or make up the leakage including cementing in cement mortar (1:3) from inside and outside both & refixing grating, plasters etc complete all as specified and directed.

S&F in repair water closet vitreous china squatting pan of ORISSA pattern size 580 mm X 440 mm white with integral foot rest incl setting the cast iron trap & pan into cement and sand mortar, provn of lime concrete bedding complete.incl valveless syphonic action type PVC low level dule action flash flushing cistern with inlet ball valve float & handle incl. brackets of 10 ltrs capacity complete all as specified and directed.

S&F in repair vitreous china wash down water closet (Pedestal pattern) white complete including provision of lime concrete bedding, valveless syphonic action type PVC low level flushing cistern with inlet ball valve float & handle incl. brackets of 10 ltrs capacity complete with plastic water closet seat white closed pattern with flat bottom & cover & mild steel chromium plated or aluminium hinges device & flush pipe of polythene of low or high density of PVC 32mm dia for low level PVC cistern Ist quality complete all as specified and directed.

S&F in repair medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 15 mm bore GI tubings complete all as specified and directed.

S&F in repair medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 20 mm bore GI tubings complete all as specified and directed.

S&F in repair 100mm dia cast iron spun pipe soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

All as per item No 42.00 above but fixed on walls complete all as specified and directed.

S&F in repair 75mm dia cast iron spun pipe soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed .

All as per item No 44.00 above but fixed on walls complete all as specified and directed.

S&F in repair cast iron tee single or branch piece ( equal or unequal) ordinary or inverted of 100 mm dia complete all as specified and directed.

S&F in repair cast iron bend ( any radius) diminishing pieces or tapers ( larger bore to be measured) of 100 mm dia complete all as specified and directed.

S&F in repair cast iron tee single or branch piece ( equal or unequal) ordinary or inverted of 75 mm dia complete all as specified and directed.

S&F in repair cast iron bend ( any radius) diminishing pieces or tapers ( larger bore to be measured) of 75 mm dia complete all as specified and directed.

S&F in repair cast iron shoes of 100 mm dia complete all as specified and directed.

S&F in repairs cone cap cast iron cowls for 100mm bore pipe complete all as specified and directed.

S&F in repairs cast iron cowls for 75mm bore pipe complete all as specified and directed.

S&F in repairs 100mm dia cast iron sanitary connection- short connections pipe of length 300mm (ISI MARKED) complete all as specified and directed

S&F in repairs salt glazed stone ware gully traps square or rounded mouthed type P or S of size 150 x 150mm incl excavation earth work conc in Beds, surrounds kerbs & CI grating etc complete all as specified and directed.

S&F in repair PVC (SWR) pipes single socketed, 110 mm bore in any length with rubber ring joints, fixed to walls complete all as specified and directed .

S&F in repair PVC (SWR) pipes single socketed, 75 mm bore in any length with rubber ring joints, fixed to walls complete all as specified and directed .

S&F in repair PVC (SWR) bends, Tee, single Y, elbow and shoes of any radius of 110 mm bore complete all as specified and directed.

S&F in repair PVC (SWR) bends, Tee, single Y, elbow and shoes of any radius of 75 mm bore complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm dia floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair CI floor trap with grating including jointing to waste pipe in run lead, dia of outlet 75 mm including floor around to required depth and burning lead joints etc to facilitate dismantling old CI trap and making good complete all as specified and directed.

M&L for Extra over cast iron pipe and fitting if lead joint are provided in lieu of cement joints for 100 mm bore of pipe complete all as specified and directed.

M&L for Extra over cast iron pipe and fitting if lead joint are provided in lieu of cement joints for 75 mm bore of pipe complete all as specified and directed.

S&F in repair rotational moulded polythene water storage tanks in double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 300 ltrs incl making connection with fitting for inlet & outlet pipe complete all as specified and directed.

S&F in repair rotational moulded polythene water storage tanks in double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 ltrs incl making connection with fitting for inlet & outlet pipe complete all as specified and directed.

M&L for Cutting chases pinning in making good to facing where required and pointing in cement mortar (1:2) for concealed water tubing etc as in brick walls exc 10 cm but not exc 20 cm girth complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads or from metal frames including punching or drilling out old glazing pins /spring clip complete all as specified and as directed.( work to be executed upto 5th floors height)

S&F Glazing with plain sheet glass, ordinary quality, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.

S&F Glazing with 4 to 5mm thick sheet glass, ordinary quality, of any size including grinding of edges for showcase sliding shutter and shelves incl fixing brakets complete all as specified and directed. .

S&F Glazing with figured glass (Frosted), pin head type, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.

S&F Stainless steel drapery curtain rods gold and antique silver 25 mm nominal dia and minimum wall thickness 1.20mm of SS -304 grade of approved brackets design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod including taking down old pelmet, complete all as specified and directed.

M&L for solar control film 50 micron reflective type sticked to glass pane as per instructions of manufacturers exceeding 1.5 sqm complete all as specified and directed.

M&L for cleaning of all blockages of Nahni traps /floor traps /bottle traps, blockages of WC's, Rain water pipes, Rain water spouts at roof level, 100 mm dia CI pipes upto 1st manhole/GT in shafts, vertical CI soil/waste pipe stacks, CI Tee/door bends etc & cleaning of drain pipes 150 mm to 250 mm internal dia by rodding and manholes upto 3.0 metre in depth and removal of sludge/silt/liquid mud sand (in foul conditions) etc, out of MOD premises (at the location notified by the local Municipal Corporation/Cantt board) complete all as specified and directed by the Engineer-in-Charge to maintain internal & external sewage system in functional state at all the time by engaging/deploying with manual/pressure cleaning pump and flexible rods and other necessary equipments (as per rules of public health), including digging required nos of pits for depositing sludge and furture capping the pit with the 25 cm thick layer of soil. complete all as specified and directed by Engineer-in-charge. Note- (a) If necessiated by the Engr-in-charge/GE for work on Sunday/ holidays, the contractor shall provide skilled tradesmen. (b) Contractor Proper records (date wise) of complaints received & rectified by the them and responsible to take care to complaint register, complaint slip from 9 AM to 5 PM per day other wise shall be penalised @ Rs.100/- per complaint if he fails to attend the complaint with in 6 hours as per complaint register which is kept in complaint cell. (c) Contractor arrengement skilled trademan, adiquate manpowers during execution of internal and external plumbing works including all safety precaution, scaffolding, standing pads, with all safety measures as per Govt guide linse and rules up to fourth storey of building. Rate shall be quoted accordingly, keeping in mind above said all provisions.

M&L for PCC 40 mm thick 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring complete all as specified and directed.

S&F in repair Glass self assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromoium plated bracket guard and railing 60 cm long complete all as specified and directed.

Cleaning of existing sewage lines of any dia and depth by roding manually or with machine as required at site from manhole to manhole, removing blockage of any type , flushing the line with pressure water jets and making the line fully functional including manhole cleaning complete all as specified and as directed by Engineer-in-charge

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m deep for foundation and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25 cm soft/ loose soil complete all as specified and directed.

Removing excavated materials n exc 50 m and depositing where directed at a level n exc 1.50 mtr above the starting point complete all as specified and directed.

M&L for salt glazed stone ware drain pipes 150 mm bore grade ‘A’ laid in trenches and jointed in cement mortar 1:1 including demoltion and breaking up drain piipe slat glazed including taking down old unsv pipe complete all as directed and specified.

M&L for cement concrete (1:3:6) type C-2 with using 40 mm grade stone aggregate for bed to 150 mm dia Sewage pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Cleaning of Septic Tank of capacity 200 users by using mobile high pressure super sucker macnine consisting of two tanks (a water tank and a sludge tank), or alternatively two vehicles (super sucker unit and dump tanks), a high pressure water jet pimp and a high flow jetting blower or vacuum pump for suction, pumping out sewae water accumulated night soil, sludge's (both soild and liquid) and other obstructive materials into dump tank and removing to outside of defence land immediately for disposal, re-fixing the cover after complete cleaning of septic tank, complete all as specified and as directed by Engr-in-Chagre. Note :- (a) After removal of the sludges from the pits, the setic tank to be cleaned thoroughtly with wter. (b) Cleaning to be confirmed by the Engr-in-Charge of the work. (c) Care shall be given to maintain hygeinic condition while removing sludge/foul materials to pit etc. 3 (d) Dates of measurment and location shall be recorded commensurate with users certificate of compliance in a register duly signed by the contractor & Engr-in-charge. (e) Cleaning of tanks once carried out shall not be repeated without written request of the user and approval of Engr-in-charge/GE. (f) Contractor should quote rate on whole job basis.

Demolition of reinforced cement concrete of any description and any position no otherwise specifically ( below or above ground level) including cutting of reinforcement as required to facilitate demoilition incl removing the unserviceable material out side the MOD land complete all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landing, cover slab, manhole cover etc including necessary form work, set in cement mortar 1:4 complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required,including cranking, bending, spirally for hooping for columns, hooking ends and binding with with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for cement concrete type C-2, 1:3:6 ( 20mm graded stone aggregate ) , 75 mm thick as in plinth protection , finished cement concrete surface even & smooth without using extra cement complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipes and renderning, cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1, smooth finished and reforming benching as required for 150 mm internal dia of pipes complete all as specified and directed.

M&L for demolition of cement concrete in the sunken floor and and removing rubbish and cleaning sunken portion of slab (Bottom & sides) and providing water proofing treatment as under :- (a) Providing upto 50 mm concave coving with PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate mixed with liquid WPC to maintenance damage/smooth sunken floor surfaces. (b) Applying 15mm thick plaster in CM 1:4 admixed with WPC all around of sunken floor . (e) Fixing of GI tubing 40 mm dia of medium grade for spout length as per site for sunken floor. (b) Apply WPC with cement slowly as 1:20 ratio or as per manufacture instruction upto to top of sunken portion. (f) Applying 2 full coats of brush bond acrylic emulsion based elastomeric water proofing coating after the primer with a min time gap of 4-6 hrs between 1st & 2nd coat. (c) Fixing the all GI/CI/PVC pipe/fiftings of any dia (Pipe/fittings will be measured and paid separately) and laying half bricks all surrounding of the pipe/fittings. (d) Filled the all half bricks gaps with cement mortar in 1: 3 ratio mixed with WPC 200ml per 50kg of cement. (e) Over plaster apply WPC with cement slowly as 1:20 Ratio or as per manufacture instruction to achieve smooth surface. (f) Provide PCC 40 mm thick 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) mixed with water proofing compound as per manufacture instruction over PCC 1:5:10 as remain portion of in sunken floor complete all as specified and directed (Note : Measurement will be taken as floor area of the sunken floor)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 8-10mm thick coloured non skid ceramic tiles in floors, of size 400 x 400 mm/600x600 set & jointed in neat cement slurry and pointed in coloured cement to match over & including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for (300X200,350X250,450X350mm)x6-7 mm thick glazed ceramic tiles colored as in dado/ skirting and vertical serfaces set & jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick cement mortar 1:4, Shade, pattern, laying etc of tiles as directed at site complete all as specified and directed.

All as per Item No 90.00 above but as in Skirting with 10mm thick rendering in CM 1:3 in vertical surfaces complete all as specified and directed.

Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, drains, culverts and walls etc but excluding ashlar facings, dressed stone work and pre cast concrete articles, built in cement mortar incl removing the unserviceable material out side the MOD land complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6.00 m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick built in CM 1:4 complete all as specified and directed.

Demolition of cement concrete unreinforced of any description and in any position not other wise specifically provided incling removing the unserviceable material out side the MOD land complete all as specified and directed.

M&L for lean concrete 1:4:8 type D2(using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6, type C-1 (using 20 mm graded Agg) as in drain finished even & smooth surface without using extra cement complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggragated) as in plinth courses, string courses, mud stops or roof kerbs, benchning, copings, channels, slightly chamfered or rounded on edge including necessary use of form work complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base or sub floors finishing the surfaces even and rough to receive the topping layer complete all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finished even and smooth surface without using extra cement complete all as specified and directed.

M&L for pre cast reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slabs for manholes, drains and such similar works including set in CM 1:6 complete all as specified and directed.

M&L for reinforced cement concrete type B-1 (1:2:4) (Nominal Mix) using 20 mm graded aggregate as in slab supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, chajja, deck slab and in shelves and the like including demolition complete all as specified and directed.

M&L for form work to soffits of suspended slab such as roof slab floor slab landings and simmilar work flat for fair finished urface complete all as specified and directed.

Dismantling of Stone slabs and tiles any pattern, paver block of any description or thickness in floors, approns, vertical surface of walls etc complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over 15 mm cement screed base laid 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine vibrated precast concrete interlocking paver/ tiles (glazed finish) with grey cement and pigment any shape, any size, confirming to IS 15658-2006 of 80 mm thick and M-40 grade complete all as specified and directed by Engg in charge.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for cement concrete chequered tiles top quoted with size 300x300x22-25 mm thick with grey cement and no pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Washing, rubbing down and stopping of old distempered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

M&L for Washing, rubbing down and stopping of old distempered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old distempered surfaces of wall by complete removal of existing treatment from wall surfaces and applying two coats of distemper oil emulssion, white or tinted over one coat of alkali-resistant primer paint and 1.5mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment and applying 1mm thick wall care putty to achived smooth surface and then applying two coats of oil bound distemper over a coat of chalk whitening as priming coat after preparation of ceiling surfaces complete all as specified and directed.

M&L for applying one coat of white wash on old decorated ceiling surfaces including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and greesy spots complete all as specified and directed.

M&L for applying one coat of cement base paint on old painted wall surface including preparation of surfaces complete all as specified and directed.

M&L for preparation of old surfaces of walls by completet removal of existing and after preparation of surfaces applying primer and further applying two coat of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment and applying finishing walls with Acrylic Smooth exterior paint of required shade more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L for Washing, rubbing down and stopping of old surface and applying one coat of acrylic Smooth exterior paint of required shade complete all as specified and directed.

M&L applying one coat of synthetic enamel paint on old painted wooden surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of synthetic enamel paint over one coat of primer of wooden surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of synthetic enamel paint over one coat of primer of steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on conc/brick surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick cement plastering in cement mortar 1:4 with WPC on fair faces of brick work or concrete surfaces finished even & fair without using extra cement complete all as specified and directed. (WPC will be measured and paid saparately)

M&L for 5mm thick cement plastering in cement mortar 1:3 as on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound as per manufacture instruction complete all as specified and directed.

M&L for Preparation of new plastered surface and applying one & more coat of white putty min 1 mm thick on wall surfaces over a coat of chalk whiting priming over tow coat of distemper oil emulsion complete all as specified and directed.

M&L for Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and directed.

M&L for prepapation of new plaster serface of walls and applying two coats of acrylic emultion weather coat paint over a coat of primer over 1mm thick cement base wall care putty complete all as specified and directed.

M&L for providing PMM (Polymer modified cementitious mortar) :- (i) Dry sub strata surface and free of debris & dust (ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes). (iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness. Note : Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairly rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use. (iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufacturer complete all as specified and directed.

M&L for PCC 1:3:6,type C-1 (using 20mm graded aggregate) as in water tank platform mixed with water proofing compound as per manufacture instruction as in roof floors (water proofing compound to be measured separately) complete all as specified and directed.

M&L for Providing and injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed by Engg in charge.

Disconnecting existing tanks setting a side (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. Note :- The rates for these items deemed to be included for cleaning of complete house such as floor(includes application of pouncha with wet cloths), removing of all spots on door, window and wall and floor tile in kitchen and bath room after Apex/painting, cleaning of glass paes for door & windows including garges shutters & its shutter proper and over cover the furniture properly during Apex & painting of tarpoline cover paints in different room and lay out of all furniture items proplerly after completion of entire process complete all as specified and directed by Engineer In Charge. The above work shall be carried out upto sixth storey height of buildings including all safety factor

M&L for uprooting plants (girth n.exc 15 cm of trunk to any of plants grown along the pipes or walls chajjas, parapets and roof of building and making good the surface as per existing surface and pouring acid not less than 100ml for each plant in the roof to avoid further growth complete all as specified and directed. Note:-Work has to be executed in multi storey bldgs upto 25 Meter height Note: (a) Srl Item No 02.00 to 07.00, 09.00, 13.00, 14.00, 18.00, 21.00, 33.00 to 36.00, 39.00, 63.00, 64.00, 79.00, 80.00, 83.00, 85.00, 89.00 to 91.00, 93.00, 94.00, 99.00, 100.00, 105.00 to 121.00, 123.00 to 130.00 & 131.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody. (b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge.

B S R Enterprises (BID ID -3385797)

R.P Builders (BID ID -3385691)

A N BUILDERS (BID ID -3386343)

M/S Parshant Associates (BID ID -3386522)