Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.5 LAccepted-AOC SALI ROAD DASHMESH NAGAR PATHANKOT 145 001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Lowest bid. | |
| 2 | L2₹30.5 L+₹97,241 (3.29%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bid. | |
| 3 | L3₹34.4 L+₹4.9 L (16.6%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bid. | |
| 4 | L4₹34.7 L+₹5.1 L (17.3%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bid. | |
| 5 | L5₹35.9 L+₹6.4 L (21.6%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bid. |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
28 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SOUTH MAMUN
GE SOUTH MAMUN PATHANKOT-145001
CERTAIN REPAIR AND MAINT TO OTM AND MD ACCN IN LAL TIKKU KHAD AREA UNDER AGE B/R-II OF GE (SOUTH) MAMUN
2023_MES_600271_3
GE(S)/M-08/2023-24
Open Tender
Miscellaneous Works
Item Rate
270 days
GE SOUTH MAMUN
AS PER NIT
8 documents required · 8 mandatory
₹500
GE SOUTH MAMUN
₹70,000
Yes
11 Aug 2023
8 Jul 2023
4 Aug 2023
8 Jul 2023
28 Jul 2023
15 Jul 2023
Amount
Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness(below or above ground level) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Dismantling of Stone slabs and tiles/paver blocks of any description or thickness in floors, aprons etc bedded and pointed in any mortar complete all as specified and directed.
Demolition of brick work or stone/bouldermasonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Taking down chowkhats or frames with shutter not exc 1.5 Sqm each (without taking off shutters from the frame), complete all as specified and directed.
Taking down chowkhats or frames exc 1.5 Sqm but not exc 4.0 Sqm each (without taking off shutters from the frame), complete all as specified and directed.
Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with oil putty or fixed with beads / clips, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 10mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.
M&L for 5mm thick rendering or plastering work in CM 1:3 on fascia or edging of chajjas, ceiling and roof projections etc. including taking out peeled off existing plaster / concrete including roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement, complete all as specified and directed.
M&L for brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
M&L for brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes, complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes, complete all as specified and directed.
M&L for Vitrfied ceramic coloured tiles 10mm thick (square/rectangular) light shade,polished area of each tile not exc 0.36 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes, complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick light shade on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles complete all as specified and directed.
M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base floor, complete all as specified and directed.
M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid dry over and including 50 mm thick screened river washed sand cushion, complete all as specified and directed.
M&L interlocking paver block of any shape of 60mm thickness, M-35 Grade, (EXCEPT BLOCKS) laid dry over and including 50 mm thick screened river washed sand cushion, complete all as specified and directed.
M&L for plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in coping, benching, slope etc, complete all as specified and directed.
M&L for Machine pressed precast coloured chequered cement concrete tiles of size 30cm X 30cm X 25mm thick, set, jointed & pointed in neat cement slurry with grey cement and pigment to match as in floors over and including 15mm thick screed bed or bedding layers in CM 1:6, complete all as specified and directed.
M&L 40mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in floors, finishing even and smooth without using extra cement complete all as specified and directed.
S&F Rotational moulded polyethlene water storage tank of capacity 500 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1, including dismantling of existing PVC water tank of any capacity complete all as specified and directed.
S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.
S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.
M&L for preparation of newly or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
S&F GI wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
S&F 30mm Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides with lock rail, kiln seasoned and chemically pressure treated, complete all as specified and directed.
S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.
S&F 35mm thick factory made wire guazed and skeleton shutters (2nd class hardwood), open rebated and prepared to receive wire cloth, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire cloth etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats at site, complete all as specified and directed.
M&L for preparation of newly wood & wooden based surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of pink primer complete all as specified and directed.
S&F factory made single extruded WPC (Wood Polymer Composite) soild door/window/Ceosetory windows & other frames/chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium cabonated and natural fibers (Wood powerder/rice husk/wheat husk) non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applyng PVC solvent cement and screwed with full body threaded star headed SS screws having minumum frame density of 750kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardan and fixed in position with MS hold fast.lugs/SS dash fasterners of required dia and length complete all as specified and directed. Note: for WPC solid door/window frames, mimus 5mm tolerance in dimension i.e. depath and width of profile shall be acceptable. Variatin in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S&F factory made single extruded WPC (Wood Polymer Composite) soild plane flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium cabonated and natural fibers (Wood Powder/reice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge) minimum compressive strength 50N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water\/moisture proof and fire retardant and fixing with stainless steel but hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F "as in repair" 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F "as in repair" 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F 250mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.
S&F in repair 250mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.
S&F 100mm long butt hinges, type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.
S&F 150mm long extruded aluminium handle, cast type, anodised complete all as specified and directed.
S&F as in repair 4mm thick sheet glass, ordinary quality and glazing with oil putty or rubber neoprene in square exc 0.50 Sqm in each pane,complete all as specified and directed.
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty or rubber neoprene in square not exc 0.50 Sqm in each pane, complete all as specified and directed.
S&F "as in repair" 5mm thick tinted glass in door/window shutters including necessary aluminum beading and rubber neoprene packing complete all specified and directed.
S&F in repair 300mm size mild steel, ordinary rat tail, rod pattern spring including roller and roller plate, complete all as specified and directed.
S&F "as in repair" brass ball valve, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20mm bore pipe, complete all as specified and directed.
M&L in repair for 15mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.
M&L in repair for 20mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.
M&L in repair CP Shower rose with or without swivel joints, any size including fixing to steel pipe or union, complete all as specified and directed.
S&F "as in repair" 15mm bore stop/angle valve, with flange cast copper alloy (ISI Marked), chromium plated screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.
S&F "as in repair" 15mm bore stop valve, cast copper alloy (ISI Marked), fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.
S&F "as in repair" 15mm bore bib tap with flange, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
S&F "as in repair" Vitreous china wash basin, white flat back of size 550mm x 400mm including 32mm size CP waste coupling full thread and 32mm dia PVC waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and directed.
S&F "as in repair" Vitreous china wash basin, oval type, including 32mm size CP waste coupling full thread and 32mm dia PVC waste pipe, brackets and cutting for and pinning in ends of brackets or errecting on granite slab stand, including waste coupling 32mm size full thread, complete all as specified and directed.
S&F "as in repair" 15mm bore Pillar tap, cast copper alloy, fancy type, with capston head, chromium plated, screwed down, high pressure with or without letters, hot or cold with long screwed shank and fly nuts, screwed for iron pipe, complete all as specified and directed.
S&F "as in repair" 15mm bore Brass CP mixer for WHB mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F "as in repair" 15mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F "as in repair" Vitreous china squatting pan of 'Orissa pattern' of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed.
S&F "as in repair" Vitreous china wash down water closet pan (pedestal pattern), white complete including fixing to trap including PVC seat and cover for pedestal pan and connecting etc, complete all as specified and directed.
S&F "as in repair" plastic seat cover,back closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.
S&F "as in repair" PVC flushing cistern of 10 Ltrs capacity including PVC inlet and outlet connections, brackets, PVC flush pipe with bend 32mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed.
S&F "as in repair" Jet Spray (with 1.50 Mtr tube), fixed to EWC and angular stop cock/valve, complete all as specified and directed.
S&F "as in repair" health foucet (with 1.5mtr long PVC tube) fixed to angular stop cock and complete wall hanging arrangement, complete all as specified and directed.
S&F "as in repair" PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.
S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F pre-laminated lead free factory made 18mm (+ 0.7mm) thick 100% solid WPC (wood polymer composite) sheet having high natural fibre content 25 to 30% wood colour sheets having density not less than 600Kg/cum and weight not less than 11 kg/sqm and should be 100% termite/water proof, fire retardant, Eco friendly, finish at all edges for making edges lipping/bending, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness complete all as specified and directed.
S&F "as in repair" sink with drainage board, made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mm x 330mm x 160mm including CP waste coupling and 32mm dia waste pipe including making disturbed surface to match with existing surfaces, complete all as specified and directed.
S&F "as in repair" stainless steel kitchen plate rack of size 750mmx900mm, made of stainless steel 1mm thick, fixed with plastic plugs and mild steel screws, complete all as specified and directed.
S&F corrugated waste pipe, 32mm dia, suitable for WHBs/Sinks, including threaded PVC socket suitable for shank of waste coupling complete all as specified and directed.
S&F "as in repair" 100mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.
S&F "as in repair" 100mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches / floors complete all as specified and directed.
M&L for 75mm thick cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving, laid in slope, finished even and fair including making joints at every 2.5 mtr and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight, complete all as specified and directed.
S&F "as in repair" stainless steel Grating doom 100mm dia, fixed in floors complete all as specified and directed.
S&F "as in repair" stainless steel Grating doom 100mm dia with waste hole, fixed in floors complete all as specified and directed.
M&L for preparation of old surfaces of walls of any description after complete removal of existing treatment and making the surfaces smooth and applying one coats of cement base paint including curing, complete all as specified and directed.
M&L for preparation of old surfaces of walls of any description after complete removal of existing treatment and making the surfaces smooth and applying one coats of distemper oil emulsion, complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and making the surfaces smooth by applying 2mm thick wall care putty and applying two coats of oil emulsion distemper, complete all as specified and directed.
M&L for preparation of newly plastered surface of external wall and applying two coats of cement base paint over a coat of alkali resistant primer including curing, complete all as specified and directed.
M&L for 5mm thick wood grain printed PVC sheet in strips & channel feathered at edges for fixing on solid PVC wall lining, Insulated PVC wall lining, and solid PVC partitions inclusive of solvent cement and fixing at site with PVC frame work 5mm thick and 35mm wide including demolition of wall and ceiling boards (fibre, pulp, insulated, etc.) or insulation boards/ blankets, any thickness including cover fillets complete all as specified and directed.
M&L for Door closer aluminium extuded section body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.
S&F for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.
Taking down carefully existing steel rolling shutters any type for carrying out necessary repairs by replacing old unserviceable parts, greasing oiling for its smooth functioning complete and re-erecting the same in old position complete all as specified and directed.
S&F in repair ball bearing for rolling shutters, complete all as specified and directed.
S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.complete all as specified and directed.
S&F 5.5mm thick coloured or tinted glass glazing fixed with aluminum beads (beading included with shutter) complete all specified & directed.
S&F for mortice lock 4 lever verticle type size 100mm long, complete all as specified and directed.
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
Alishan Builders
AV ENTERPRISES
M/s Ashoka Brothers
dadwal engineers
Bidder Name
dadwal engineers
surjit enterprises
AV ENTERPRISES
M/s Ashoka Brothers
Alishan Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .