REPAIR OF SEWAGE LINE, SEPTIC TANK, SOAKAGE WELL, SEWAGE SYSTEM AND OTHER MISC WORK AT MIL STATION KASAULI UNDER GE KASAULI

Amount

Schedule 'A' Section - I

Dismantling of brick work or stone masonary, precast cement concrete walling built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

Material and labour for brick work with sub class ‘B’ bricks burnt, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), complete all as specified and directed.

Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and as directed.

Material and labour for walling of random rubble, uncoursed stone masonry,well bonded, bedded and solidly hearted, built in cement mortar 1:4 but except stone complete all as specified and as directed. Note- The serviceable stones obtained from Serial item No - 1.00 will be used after removing motar, cleaning with water, etc.)

Material and Labour for pre-cast cement concrete type B-1 1:2:4 (using 20 mm graded mechanically crushed stone aggregate), as inbond stone, Kerb stone, etc. set in cement mortar (1:4) and finished cement concrete surface even and fair without using extra cement, complete all as specified and directed.

Material and labour for raised pointing to random or polygonal rubble uncoursed or brought upto courses in cement mortar 1.4 complete, all as specified and as directed.

Supply and fixing for PVC SWR pipes 75 mm dia as in weep holes in retaining wall /rain water pipe complete all as specified

Demolition of cement concrete in ground floor and pavings not exceeding 15cm thickness (below or above ground level) and removal the rubbish/ demolished material outside defence land, complete all as specified and directed.

Material & labour for cement concrete 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate), 100 mm thick as in sub base to flooring and finishing surface fair and even complete all as specified.

Material and labour for plain cement concrete 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate), as in foundation filling and mass concrete, complete all as specified and directed.

Material and Labour for plain cement concrete 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) as in fixing of hold fasts, copings, bed plates,kerbs or mud stops, lintels upto 1.50m span, plinth courses , seismic and other bands and the like, finished the surface fair and even, including necessary form work complete all as specified and directed. Note- If reinforced concrete, reinforcement shall be measured and paid for separately.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of steel reinforcement as required to facilitate demolition and removal the rubbish/ demolished material outside defence land, complete all as specified and directed.

Material and labour for reinforced cement concrete work (nominal mix), type B1, 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings balconies , canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for 8mm dia TMT bars and over, cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete all as specified and directed

Material and Labour for formwork to sides and soffits of roof beams, cantilever, bressummers ,lintels , shelves including supports and similar work for rough finished flat surfaces of concrete, complete all as specified.

Material and Labour for form work to soffits of suspended slabs such as roof slab, floor slab and similar work not exceeding 200mm thick for fair finished surfaces of concrete flat complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key scrubbing down with water, etc. including removal the rubbish/ demolished material outside defence land, complete all as specified and directed.

Material and labour for rendering 15 mm thick on surface of any description of brick work or concrete wall surfaces in cement mortar 1:4 mixed with and including water proofing compound @ 2% by weight of cement or as per manufacturer's instruction and finished fair and even without using extra cement complete all as specified and as directed.

Material and labour for 20mm thick rendering in cement mortar (1:6) on other than fair faces of brick or concrete surface and finished the surface even and fair without using extra cement complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper with hand roller, over a coat of alkaline resistant primer, complete all as specified.

Dismantling of wrought iron or mild steel work of any description not otherwise specially provided complete all as specified and directed.

Supply and fixing framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; angle iron chowkats for door ,barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe-290-Gde E-165 complete all as specified and as directed.

Supply and fixing framed work such as in hung shutter,gates including pintle hinges, stops,hand-made sliding door bolts, grills, gratings, etc. and similar work conforming to Fe-290.Gde-E-165, complete all as specified and directed.

Supply and fixing welded steel wire fabric fixed to wood or steel members, weight exc 4 kg per square meter complete all as specified and as directed.

Supply and fixing for rolled mild steel in plates channels (plain or chequered), square cut or notched (ordinary and counter sunk) forming holes, without any attachment, of quality GDE Fe 410-S complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar (Internal dia of pipe in 150mm) complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar (Internal dia of pipe in 200mm) complete all as specified and as directed.

Supply and fixing for 150mm dia Salt-glazed stoneware drain pipes grade 'A' laid in trenches and jointed in cement mortar 1:1, complete all as specfified and directed.

Supply and fixing for 200mm dia Salt-glazed stoneware drain pipes grade 'A' laid in trenches and jointed in cement mortar 1:1, complete all as specfified and directed.

Material and labour for concrete bed to drain pipes of 150mm dia including packing under and hanging against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type-C2 using 40mm graded mechanically crushed stone aggregate , complete all as specified and directed .

Material and labour for concrete bed to drain pipes of 200mm dia including packing under and hanging against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type-C2 using 40mm graded mechanically crushed stone aggregate , complete all as specified and directed .

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons, etc. removing the rubbish outside the defence land ,complete all as specified

Material and labour for chequered cement concrete tiles, rubber moulded with laquer polish for extra shine, size 300 mm x 300 mm x 22-25 mm thick, ISI marked, coloured, set jointed and pointed in neat cement slurry over and including 20 mm thick (average thickness) cement screed (1:4) base, complete all as specified and as directed.

Material and Labour for Machine pressed precast cement concrete with grey cement and pigment, rubber moulded, interlocking designer paver blocks, in any and shape, confirming to IS-15658-2006 of 80mm thickness, M-40 grade in path, hard standing, etc. laid over and 50 mm thick bedding layer of sand complete, all as specified and as directed.

Material and Labour for 50 mm thick Sand filling under inter locking paver block including spreading, levelling and well ramming complete all as specified and as directed.

Dismantling floor, hearth or wall tiling of any description (Ceramic/PCC/Terrazo) and any thickness, including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed..

Material and labour for premium quality, glazed coloured ceramic tiles 300 x 450 x 7mm thick on vertical surfaces of walls including 10mm thick rough finished plaster in cement mortar (1:3) set jointed in neat cement slurry and pointed in coloured cement to match ,complete all as specified.

Material and labour for premium quality, joint free, non skid, coloured ceramic 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm tiles, as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including cement screed bed 15mm thick in cement mortar (1:4) base, complete all as specified.

Cleaning of septic tank including sludge chambers of any capacity by removing sludge and sludge water by mechanical pumping or manually or by other means. The sludge /sludge waste night soil in any form so obtained shall be disposed off outside defence land by depositing/spreading the same in ditch, layers are compressed with mechanical equipment and covered with earth, leveled, and compacted complete all as specified and directed. Note- Cost of excavation, depositing the soil waste, covering with earth and making good the surface included in the rate quoted by the contractor in this item.

Excavating in trenches, not exceeding 1.50 metre wide and not exceeding 1.50m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 sq.m on plan and not exceeding 1.50m in depth and getting out in hard/dense soil complete, all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soil of any description, complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 metre and deposited where directed at a level not exceeding 1.5m above the starting point, complete, all as specified and as directed.

Cutting into existing manholes for connecting new drains, and making good to pipe and rendering cutting out existing benching for and forming branch channel( 1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 (using 20mm size crushed stone aggregate) smooth finished and reforming benching as required of pipe 150 mm dia, complete, all as specified and as directed.

Material and labour for rendering 20 mm thick in cement plaster 1:4 on stone masonry surfaces or other than fair faces of brick work or concrete surfaces for manholes, finished even and fair without using extra cement complete all as specified

Supply and fixing 110mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)

Supply and fixing 110mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)

Supply and fixing in repair, 110 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified. (Note- UPVC bends shall be confirm to BS 4515 DIN 19531 and DIN 19534)

Supply and fixing 75mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall confirm be to IS 5382-1985)

Supply and fix 75mm dia of outlet, PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified. (Note- UPVC fittings shall be conforming to BS 4515 DIN 19531 and DIN 19534).

Supply and fixing for vitreous china wash down water closet pan semi-pedestal pattern (Anglo-Indian Type) , white (including fixing bolts but excluding flushing cistern and flush pipe) including plastic water closet seat white closed pattern with flat bottom cover and mild steel chromium plated or aluminium hinges device as in repair complete all as specified and as directed.

Supply and fixing in repair, vitreous china coloured squatting pan of orissa pattern, size 580mmx440mm, white (Ist quality) with ‘P’ or ’S’ trap, with front or back inlet and integral foot rests of any pattern (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc including making good to existing floor surface and connection to flush pipe etc. complete all as specified and directed.

Supply and fixing 10 litre capacity, low level, virgin polypropylene cistern, ISI marked, white complete with PVC bend/flush pipe and making all connection including taking down existing high or low level unerviceable flushing cistern and making good the disturbed surface to match with the existing surface complete all as specified and as directed.

Supply and fixing vitreous china wash hand basin white flat back of size 550x400mm with pedestal including CI brackets embedded in wall in CM 1:4, PVC waste pipe, PVC connections and chromium plated waste coupling, etc fixed in repair complete, all as specified and as directed.

Supply and fixing ( in repair), bib tap, screwed down high pressure cast copper alloy with capstan head, screwed down suitable for 15mm bore pipe or union, complete all as specified. (Note (Note : Weight of bib tap shall not be less than 0.400 Kg)

Supply and fixing (in repair), angle cock 15mm dia, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified. (Note : Weight of stop cock shall not be less than 0.400Kg.)

Supply and fixing in repair, PVC connections 450mm long with PTMT nuts and PVC washers on both ends fixed to 15 mm bore of pipe complete all as specified and directed.

Supply and fixing (as in repair) for brass chromium plated mixer for mixing hot and cold water screwed down high for 15mm bore pipe or union, complete all as specified.

Material and labour for disconnecting existing water tanks of any description and capacity exc. 250 ltr and not exc. 500 ltrs setting aside(or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and refixing in position. (cleaning repairing, etc. measured separately) complete all as specified and as directed.

Material and labour for disconnecting existing water tanks of any description and capacity exc. 500 ltr and not exc. 1000 ltrs setting aside(or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and refixing in position. (cleaning repairing, etc. measured separately) complete all as specified and as directed.

Amount of credit of Rs. 89170.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

Varindera And Varindera Construction (BID ID -3450772)

Durga Construction (BID ID -3454279)

Vinod Kumar Aggarwal (BID ID -3453998)