Improvement and Upgradation of Maulana Azad Road

Amount

Civil Works:

Demolishing cement concrete manually/by mechanical means including Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:4:8 or leaner mix (i/c equivalent design mix)

Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material upto a lead of 1 kilometer, as per direction of Engineer-in-charge.Existing Bitumen Road upto required Level

Taking out existing kerb stones of all types from footpath/ central verge,including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 meter lead as per direction of Engineer-in-Charge.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 meter lead as per direction of Engineer-in-Charge.

Dismantling steel work manually/by mechanical means in built upsections without dismembering and stacking within 50 meters lead as perdirection of Engineer-in-charge.

Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads & lifts

Disposal of Lime, moorum, building rubbish upto 10 km Lead

Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications.On bitumen surface @ 0.50 Kg/sqm

Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete

Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge.50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.

Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 16.64.1 25 mm compacted thickness with bitumen of grade VG- 10 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.

Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge

Flooring with Cobble stone of approx. Size 125x125x75 mm (thick) laid on 25 mm average thick cement mortar 1:3 ( 1 cement : 3 Coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the stone, laid in approved pattern complete in all respect as per direction of Engineer-in-charge.

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Providing, laying and making kerb channel 30cm wide and 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth etc. complete as per direction of Engineer-incharge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm

Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity ncapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame ofM.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm.

Cautionary/warning sign boards of equilateral triangular shape having each side of 900 mm support length of 3650mm.

Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with thef resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage.

Providing and Placing cast Iron Ornamental Bollard in position 200 mm dia Bollards 915 mm high long with 250x250x6 mm M.S. plate welded at bottom and embeded in 150 mm in cement concrete 1: 2: 4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size) including necessary excavation of size 350x350x450mm deep for the same in bitumen/concrete pavement at specified spacing.

Providing and Placing Stainless Steel Bollard in position 125 mm dia Bollards 1200 mm high of required shape including providing Stainless Steel 125 mm dia 1200 mm long in the Bollard and stainlesssteel. long with 150x150x6 mm M.S. plate welded at bottom and embeded 150 mm in cement concrete 1: 3: 6 (1 cement:3 coarse sand:6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing.

Providing and fixing post delineators made of ABS round body fitted with 2nos. 100mm dia high reflective and reflectors and mounted on M.S. pipe of 65mm dia duly powder coated with anti-rust and anti-theft steel to be installed as per direction of Engineer-in-charge.

Supplying and installation of mild steel chain link for Bollard Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete as directed by enigineer incharge

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres

All kinds of soil :

Ordinary Rock

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :

All kinds of soil :

Constructing brick masonry road gully chamber of specified size with common burnt clay(non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4coarse sand) including precast R.C.C. horizontal grating with frame complete as per standard design:

Providing, lowering, laying in trenches, aligning, fixing in position and jointing socketed rubber gasket type ISI marked 90 mm dia uPVC pipes of Class III (6 Kg/sqcm) suitable for potable water with rubber ring joints (as per IS 4985-2000) of 90 mm outer dia with all accessories (excluding specials) complete including all material,labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete

800 mm dia. R.C.C. pipe

450 mm dia. R.C.C. pipe

Providing and constructing RCC manhole Size 1.2 M x 1.2 M upto a depth of 2 M excluding excavation including foundation concrete 250 mm thick and haunches and channels in C.C. 1:2:4 proportion, finishing channels in smooth rendering, providing C.I. dapuri type steps each weighing 5.5 kg., 1:2:4 coping and fixing in position steel fibre reinforced concrete ( SFRC) Frame and cover (20 tonnes capacity) of approved make including loading, unloading, transportation, all taxes, etc complete as directed by Engineering-incharge.

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete For pipes 100 to 250 mm diameter

Providing and constructing RCC manhole Size 1.2 M x 1.2 M upto a depth of 0.9 M excluding excavation including foundation concrete 250 mm thick and haunches and channels in C.C. 1:2:4 proportion, finishing channels in smooth rendering, providing C.I. dapuri type steps each weighing 5.5 kg., 1:2:4 coping and fixing in position steel fibre reinforced concrete ( SFRC) Frame and cover (20 tonnes capacity) of approved make including loading, unloading, transportation, all taxes, etc complete as directed by Engineering-incharge.

Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead as per directions of Engineer-in-Charge:

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329

100 mm dia Ductile Iron Class K - 7 Pipes

150 mm dia Ductile Iron Class K - 7 Pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket.

100 mm dia pipes

150 mm dia pipes

Providing and laying D.I. Specials of Class K-12 suitable for push-on jointing as per IS : 9523 Upto 600 mm dia.

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).50 mm dia.

CELESTIAL BINS 40 Lts.Stainless SteelWaste Containers or Rigid liners as per Specificationb. Made From High Quality Stainless Steel, including fixing at site as per the direction of manufacturer and engineer in charge.@ 100 mts

Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment)

Rough dressing of the trenched ground including breaking clods.

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 part of stacked volume of earth after reduction by 20% :1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish & surplus earth, if any with all leads & lifts (cost of sludge, manure or extra good earth, if needed, to be paid for separately)

Holes 90 cm dia& 90 cm deep

Holes 60 cm dia& 60 cm deep

Holes 45 cm dia& 45 cm deep

Providing and Displaying Acalypha Different colour well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size of Earthen Pot/ Plastic Pot bushy as per direction of the officer-in-charge.

Providing and Displaying Bird of paradise well developed with fresh & healthy 90 to 120 cm ht in 30 cm Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.

Providing and stacking of Jacaranda mimosifolia of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

Providing and fixing M.S. flat iron tree guard 60 cm dia. and 2 m high above ground level formed of 4 nos. 25x6 mm, 2.25m long and 8 nos. 25x3 mm 2 m long vertical M.S. flats riveted to 3 nos.25x6 mm MS flat iron rings in two halves, fixed together at site with required 6 no. of 8 mm dia. and 30 mm long bolts including painting two coats with paint of approved brand and manufacture over a coat of primer. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD/PWD/any other approved name The tree guard shall be suitably fixed to the ground by embedding four legs of the tree guard in pits of suitable dia. and to a depth of 25 cm, refilling the pits with soil and ramming, complete in all respect as per satisfaction on direction of Officer-in-charge

Providing and fixing Precast R.C.C. grating with frame 500x450 mm horizontal grating for Avenue Plantation complete in all respect as per satisfaction on direction of Officer-in-charge

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth,consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete cm :

PE-100 a) 6 Kg/Sq.

HDPE Pipe 75mm

Lowering, Laying and Jointing H. D. P. E./M.D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II

Constructing brick masonry inspection chamber 90cm x 45cm x30cm in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making haunches, channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.

Electrical Works

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Supply of of S.T. poles 9.0 Meter long swaged Type conforming to ST 540 SP-33, IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level including Aluminium Paint of approved brand with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5ms (SP 33). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of 8 Mtr. Long Pole( ST-540 SP15) IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level including Aluminium Paint of approved brand with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5ms (SP 15). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for Ch. Iron X-Arm 5'/6/7/8 Long (75*40)mm with G CLAMP and Brace including Red Oxide primer and Aluminium paint of approved brand.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for Supply of G.I U- clamps for LT Shackle insulators to be fixed without drilling/punching of poles on ST poles with pin

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for Ch. Iron X-arm including clamps & braces (GI) including Red Oxide primer and Aluminium paint of approved brand including Red Oxide primer and Aluminium paint of approved brand.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. for 100 sq mm ACSR conductor with indian standard specification .

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Supply of Supply of ACSR 50 Sqmm conforming with the Indian Standard specification IS: 398 (PLI)-1976 and IS : 398 (PL II)- 1976 or the latest version thereof.(3 phase 4 wire).

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for LT Shakle Insulator with D- Clamps

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for PG Clamps for 0.05 ACSR Conductor, binding wire etc (1 Set=3 Nos.).

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for 11KV Pin insulators (Polymer Type) 12 KV , 5KN Complete with fittings..(Lighting Impluse 75 KV positive and 80 KV negative , crepage distance 320 mm) with pins.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for 11KV Disc Insulators (Polymer Type) 12 KV , 45KN Complete with fittings..(Lighting Impluse 75 KV positive and 80 KV negative , crepage distance 320 mm).

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Galvinized Nuts and Bolts as per indian standard.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Danger Plate With Clamps as per Standards wih writing in English & Urdu.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Anti-Climbing Device with Clamps (GI Barbed Wire (12 SWG) for a distnce of 40 CM at hight of 3.5 meters from GL) , 3.50 Kg per pole.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for Pole Earthing complete by G.I Pipe 40 mm or GI rod 20 mm , 2.5 mtr long through G.I Strip of standard size.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Aluminium Jointing Sleves.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Guard Netting complete with earthingconnection on both sides using Cradle guard wire 8 SWG GI wire and lashing of 10 SWG GI wire including GI x-arms as per REC Standards, with clamps and braces, threaded eye bolts, turn buckles and binding wire, nut bolts etc.,for span of 50m

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Extension Risers (GI) Ch. 75*40*6mm , 06 Feet long with V X-arm as per REC specifications.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Cement bottoming 1:2:4 mix as per specific standards

DT'S AND SUBSTATION

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Supply of of S.T. poles 9.0 Meter long swaged Type conforming to ST 410 SP-33, IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level including Aluminium Paint of approved brand with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5ms (SP 33). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. for Gapless Surge Arrestor, 9 kV, 10 kA, Lighting Arrestor Set Heavy duty with Plymer Housing, Station type conforming to IEC-99-4 Capable of withstanding Maximum continuous operating voltages (M.C.O.V)

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. for 11KV 200 Amperes, Triple pole switches Gang Operated (G.O. Set) conforming: IS-2544, IS: 5340 (Part-III) and SS: 9921 (Part-I -V)

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of 11 KV Horn, Gap (fuse 3-phase 200A) as per Relevant IS.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of 1.1KV Grade PVC Insulated Stranded Conductor Un Armoured Sngle Core XPLE FIRLS Type Cable 630mm2 Single Core.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of 1.1KV Grade PVC Insulated Stranded Conductor Un Armoured Sngle Core XPLE FIRLS Type Cable 400mm2 Single Core.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of 1.1KV Grade PVC Insulated Stranded Conductor Un Armoured Sngle Core XPLE FIRLS Type Cable 300mm2 Single Core.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of GI Channel/Angle/Flat of sizes including clamps for L.A set/G.O set/HornGap including Red Oxide primer and Aluminium paint of approved brand.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for 11KV Disc Insulators (Polymer Type) 12 KV , 45KN Complete with fittings..(Lighting Impluse 75 KV positive and 80 KV negative , crepage distance 320 mm).

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Galvinized Nuts and Bolts as per indian standard.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. for TransformerPad/G.I Channel Bedding having bearing capacity of 300Kg

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for Earthing of Substation---Excavation of earth pit of dia 650mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as per IS 1239. GI strip for neutral earthing of size 25mm*3mm for connection of transformer body, G.O Set & lightening Arrestor as per IS 2629/85, GI nuts & bolts, refilled with earth enhancement materials & earth chamber made of brick masonry with RCC slab cover.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for 11KV Pin insulators (Polymer Type) 12 KV , 5KN Complete with fittings..(Lighting Impluse 75 KV positive and 80 KV negative , crepage distance 320 mm) with pins

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for LT Distribution Box for 1000/630/400/250 kVA DTR with MCCB ( for 1 MVA also)& SFU's for Outgoing Circuits.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc for wedge connectors/PG Clamps.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Danger Plate With Clamps as per Standards wih writing in English & Urdu.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc. of Anti-Climbing Device with Clamps (GI Barbed Wire (12 SWG) for a distnce of 40 CM at hight of 3.5 meters from GL) , 3.50 Kg per pole.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Sundry items like Aluminum lugs, Jumpers,Binding tape

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Providing & Installation/ fixing of S.L. Clamps 630/ 300 sq mm

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Providing & Installation/ fixingof Al. Thimbles 630/400/mm2.

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Any Other Item required, but not mentioned here

Supply, installation testing,and commissioning icluding labour, carriage, friegt, taxes, duties etc of Cement bottoming 1:2:4 mix as per specific standards

Dismantling

Dismantling of existing ACSR 100/50/30 Sqmm LT and transportation back to Divisional Stores. As per Instructions of Electrical Incharge.

Dismantling of existing ACSR 100/50Sqmm HT and transportation back to Divisional Stores. As per Instructions of Electrical Incharge.

Dismantling of existing PCC/Wooden Pole and transportation back to Divisional Stores. As per instruction of Electrical Incharge.

Dismantling of existing ST pole 8/9 mtr and transportation back to Divisional Stores. As per instruction of Electrical Incharge.

Dismantling of existing LT shakle Insulators with D clamps complete and transportation back to Divisional Stores. As per instruction of Electrical Incharge.

Dismantling of existing Stone Masonary Pole Bed/Wooden Bed and transportation back to Divisional Stores. As per instruction of Electrical Incharge.

Dismantling of existing Ch. Iron V-X arm, X-arm including clamps & braces (GI)

Dismantling of existing 11 kV Pin Insulators complete and transportation back to Divisional Stores. As per instruction of Electrical Incharge.

Dismantling of existing 11 kv Disk Set and transportation back to Divisional Stores.As per instruction of Electrical Incharge.

Street Light Pole

Supply, Installation, Testing and commissioning of erecting 9 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 155 mm A/F, top 70 mm A/F on provided foundation

Supply, installation, testing ,commissioning & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation .

Supply, Installation, Testing, commissioning and erecting galvanised 1000mm single arm sword type bracket with B class 32/40mm GI pipe and 3/4 mm GI plate.

Supply, Installation, Testing and commissioning & marking SPN MCB 6A to 32A, B- series (for lighting) in provided distribution board

Street Light Fitting

Supply, Installation, Testing, commissioning and erecting LED street light fitting 150 W, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete

Eathing & Foundation

Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete.

Supply, Installation, Testing, commissioning and Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia.G.l. Rod complete with all materials

Supply, Installation, Testing,commissioning and erecting G.I. strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required.

Supplying and erecting GI earth wire of high purity of different sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner.

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 9m & 10m high octagonal /conical GI pole).

Cable

Supplying, erecting & terminating XPLE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe

Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm.(12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe

Supplying, erecting & terminating XLPE armoured cable 4 core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm.(12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe

Supplying, erecting & terminating XLPE armoured cable 4 core 70 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe.

Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.

Enclosers

Supplying & erecting G.I. pipe ‘A’ class 25 mm dia. erected for enclosing PVC armoured cable on wall/pole

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Street Light Control Panel

Inspection Chamber

Supply, Installation, Testing, commissioning and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75 kg with lid and frame fixed in cement concrete.

Metering Connection

Supplying, erecting & terminating XLPE armoured cable 3½ core120 sq. mm. aluminium conductor with continuous 12.97 sq.mm. (8 SWG) G.I. earth wire complete erected with glands & lugs,on wall/ trusses/pole or laid in provided trench/ pipe.

Supplying and erecting Three phase smart energy meter DLMS compliance with 3x240V 50 cycles AC supply 10-60 A, ISI mark, accuracy class 1.0 with backlit LCD display, measuring & display V, I, kW, kWh, PF, kVA, kVAr, MD, day, week, month & with communication module configurable for GSM/Wi-Fi, IrDA/Bluetooth, complete provided panel with calibration certificate from manufacturer & duly wired with required size of PVC wires.

Supplying & laying (including excavation) 25 cm Dia half round RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).

Making trench of suitable width and depth in hard murum / tar road for laying provided LT cable up to and including 16 sq. mm complete.

Making trench of suitable width and depth in hard murum / tar road for laying provided LT cable of 16 sq. mm & above and covered with half round hume pipe complete.

Abdul Salam Mir Construction Co. Pvt Ltd

Hassan Road Construction Co Pvt Ltd

M M SHAWL ENGINEER AND CONTRACTORS PVT LTD