Co Sub Jail at Kishanpura (Baddi) District Solan (H.P) (Sub Head Development of Site Providing and Laying interlocking tiles chain link fencing and providing external water supply and external Sewerage System Co 35 KLD Sewerage Treatment Plant.

Amount

Cutting

Cutting in earth work By mechanical means in all heights/depths and in all kinds of ordinary Rock such as kankar, moorum, shingle and decomposed of soft or hard rock i.e. their intermediate classification of soil & chiselling/wedging out rock where blasting is prohibited including saturated soil and filling in embankments etc. where necessary and disposal of all excavated unserviceable material in all leads & lifts through mechanical transporation. Any damage to the private / public property during execution will be restored by the contractor whatsoever the nature of the same may be.The serviceable materials will be stacked in specified dimensions in all leads and lifts as per the direction of the Engineer-in-charge.

Excavation in foundations, trenches etc. in earth work in all kinds of soils such as pick work, jumper work, blasting work and chiselling / wedging out of hard or soft rock where blasing is prohibited up to all depths stacking the excavated soil not more than 3 meteres clear from the edge of excavation and then returning the stacked soil in 15 cms layers, when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing off all surplus excavated earth as directed by the Engineer-in- charge.

Excavation in earth work in all kinds of soil such as pick work,jumper work, including chiselling/wedging out of hard or soft rock where blasting is prohibited and disposal of all excavated earth in all leads and lifts through mechanical transportations, disposed earth to be levelled and neatly dressed as directed by Engineer-in-charge.

Providing form work with steel plates 3.15mm thick welded with angle iron frames 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping, etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling in all heights and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of material in all leads and lifts.

Foundation, footing bases of columns etc. and mass concrete.

Columns, pillars, posts and struts square, rectanagular or polygonal in plan.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses,plinth and string courses and the like.

Beams, cantilevers, girders and lintels sides and soffits of beams, small ends of beams,beam haunching, cantilivers, girders, bressumers and lintels upto all depth/height .

Flat surfaces such as soffits of suspended floors, roofs including inclined surfaces up to any degree, landings and the like:(i) Floors, etc. upto any thickness.

Edges of slabs and breaks in floors and walls under 20cm wide.

Providing and laying cement concrete 1 : 6 : 12 (1 cement : 6 sand :12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads & lifts.

Providing and laying cement concrete 1 : 4 : 8 (1 cement : 4 sand :8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads & lifts.

Providing & laying cement concrete having strength of M-25 design mixed aggregate mechanically mixed and vibrated for reinforced concrete in and curing complete and reinforcement for reinforced concrete work in including carriage of material in all leads and lifts.:

Foundation footing basis of columns and the like and mass concrete

Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses,plinth and string courses etc. from top of foundation upto floor two level :

Columns, pillars, posts & struts etc.and the like .

Suspended Floor roofs, landing and shelves and their supportbalconies,beams,girders,bressumers and contilever upto all floor level.

Providing & laying TMT./Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete including carriage of material in all leads and lifts. upto all heights including including carriage of material in all leads and lifts. Approved Make of Steel authority of India, RIN ,Tissco

Random rubble masonry /polygonal rubble masonry ( uncoursed/brought to courses ) with hard stones of approved quality in foudation and plinth i/c leveling up with cement concerte 1:6:12 ( 1cement : 6sand :12 graded stone aggregate 20mm nominal size ) at plith level in i/c carriage of material in all leads and lifts .Confirming to HPPWD/ CPWD Specification .

Stone filling behind retaining wall including carriage of material in all leads and lifts.

Providing 100mm dia PVC pipe for weepholes i/c carriage of material in all leads &lifts :- Confirming to BIS specifications

Providing and laying cement concrete 1:4:8 ( 1 cement: 4 sand: 8 graded stone aggregate 40 mm nominal size) with 15% plum, the size of plum should be 150 to 300 mm and curing complete, including cost of form work with steel plates and filled with boulders as per HPPWD specification including carriage of material in all leads & lifts.

Cement concrete flooring 1:2:4 ( 1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage ofd material in all leads and lifts. 40 mm thick

Providing and laying of interlocking concrete Block pavements NTC Brand having thickness 60 mm as per drawings and technical specification Clause 1504.including carriage of material in all leads & lifts

Steel work welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of red lead paint including carriage of material in all leads and lifts: -approved make TISSCO/ RIN / Steel Authority of India

In gratings framed guard bars, ladders, railling, brackets and similar works i/c making holes & filling the same with cement concrete 1:2:4 (1 cement:2 sand 4 graded stone aggregate 20mm nominal size).

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter i/c carrage of material in all leads and lifts. (a) Enamel paint other than white.

15 mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior/exterior plastering upto all heights including arises, Internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:4 ( 1 cement :4 sand) i/c carrage of material in all leads and lifts.

Extra over item No. 17 For finishing with a floating coat of neat cement slurryincluding carriage of material in all leads and lifts.

Providing and laying Kerb and channel section casted with casting machine for carriage way ,having concerte of strenth M-20 laid over a bedding of concerte lean, set in cement mortor 1:3 as per drawing and Technical specification i/c carriage of material in all leads & lifts

Providing and fixing Chain link fencing of G.I wire with 5.0cm x5.0cm box duly welded with angle iron of size 50x50x6mm i/c holding the wire with angle and MS flat 50 x 6mm with nuts & bolts and washers i/c embeding the M.S angle iron in cement concerte 1:2:4 (1Cement :2 sand :4 gradeded stone aggregate 20 mm nominal size ) complete as per Arch .Drgs of HIMUDA as Directed by the Engineer -in-Charge .

Providing and laying in trenches (ISI Marked) galvanised mild steel tubes ( Midium grade) , tube fittings ( Earth work to be measured & paid for seperately).i/c carriage of material in all leads & lifts :- Approved make of Jindal Hissar / Tata Confirming to BIS specifications.

25 mm nominal size

32 mm nominal size

50mm nominal size

65 mm nominal size

100 mm nominal size

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40 mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lifts: (JINDAL-Hissar / Tata MAKE).

Making connection of galvanised steel distribution branch with galvanised mild steel main 50mm to 80 mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lifts: (JINDAL-Hissar / Tata MAKE).

Providing and fixing G.I./M.I. Union of following sizes ( where not included in the items including carriage of material in all leads & lifts.:- Confirming to BIS specification

25 mm nominal size

32 mm nominal size

50 mm nominal size

65 mm nominal size

100 mm nominal size

Providing and fixing dry barrel fire hydrant with 65 mm outlet i/c butterfly valve i/c with complete components including Hose pipe carriage of material in all leads and lifts. Approved Make of Kartar/Kirloskar / Leader /Sant /Senior : Confirming to BIS Specifications.

Providing and fixing indication plate for fire- hydrent/ Sluice valve including carriage of material in all leads and lifts .

Providing and fixing sluice valve ( with hand wheel) as per IS 780 Class upto 300 mm dia ( including brass spindle as per IS 2906 Class- II for diametre not more than 300 mm complete with bolts nuts, rubber insertion etc. (The tail piece if required shall measdured and paid for seperately including carriage of material in all leads and lifts 100 mm dia of Kirloskar / Leader /Sant /Senior :Confirming to BIS Specifications.

Providing and fixing sand all arranged the galvanised mild steel tubes & fittings including carriage of material in all leads and lifts

25 mm nominal size

32 mm nominal size

50mm nominal size

65 mm nominal size

100 mm nominal size

Painting GI pipe & fitting with two coats of anti-corrosive bitumastic paint of approved quality including carriage of material in all leads and lifts:- Confirming to BIS Specifications.

25 mm nominal size

32 mm nominal size

50mm nominal size

65 mm nominal size

100 mm nominal size

Constructing chamber 600mmx600mmx750mm inside sizes for fire hydrants with C.I.surface box 350mmx550mm top and 165mm deep (inside) with chained lid RCC top slab 1:2:4 mixed (1 cement :2 saand: 4 graded stone aggregate 20mm nominal size ) 100mm thick foundation concrete 1:5:10 (1 cement :5 sand :10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3(1 cement : 3 sand) finished with floating coat of neat cement including curing complete including carriage of material in all leads and lifts.

With 230 mm thick walls of brick masonry in cement mortar 1:5(1 cement :5 sand).

Constructing chamber 300mm X 300mmX500mm inside sizes for brass full way valve/stop cock with C.I. Surface box 100mmX 100mm X75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mixe (1 cement:2 sand:4 graded stone aggregate 20mm nominal size )75mm thick foundation concrete 1:5:10(1cement:5 sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1cement : 3 sand finished with floating coat of neat cement including curing complete including carriage of material in all leads and lifts.(a) With 100 mm thick walls brick masonry in cement mortar 1:5(1cement : 5sand)

Constructing man hole with RCC top slab in 1:2:4 mix (1cement:2sand: 4graded stone aggregate 20mm nominal size ) Foundation concrete 1:4:8 (1cement : 4sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortor 1:3(1 cement:3 sand) finished with a floating coat of neat cement and including making channels in cement concrete 1:2:4 mix (1cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testng

.(i) Inside size 800x800x 500 mm deep including S.F.R.C. frame and cover medium duty 500mm diametre internal size.(a)With 230mm thick walls of brick masnoey using common burnt clay building bricks in cment mortor 1:3(1 cement :3sand) including carriage of materials in all leads and lifts.

(ii) Insize 1200 x 900 x 1.00 mtr deep including S.F.R.C. frame and cover medium duty 500mm diametre internal size.(a)With 230mm thick walls of brick masnoey using common burnt clay building bricks in cment mortor 1:3(1 cement :3sand) including carriage of materials in all leads and lifts.

Providing 200 mm wide cast iron rungs with chequred or ribbed non slip surface including fixing in man holes with 200mmx200 mmx100 mm cement condrete 1:3:6 ( 1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) including carriage of material in all leads & lifts.

Providing and laying (to level or slopes) and jointing reinforced concrete light duty) non- pressure pipes ISI Class NP.2 or P of the following internal diametres with collars and butt ends prepared for collar joint including testing of joints complete Including carriage of material in all leads and lifts :-

150 mm dia

250 mm dia

300 mm dia

Providing andv fixing SFRC frame & cover 455X610 mm including carriage of material in all leads and lifts.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand)including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Gradedstone aggregate of 20 mm nominal size) and finished with a floating coat of neat with a floating coat of neat cement complete as per standard design Including carriage of material in all leads and lifts :-

Suresh Kumar