Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance 180 10 STREET NO 10 HARPAL NAGAR NEAR TRIVENI MANDIR BHATTI ROAD BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | Admitted-Finance |
Tender Value
₹12.7 L
EMD Value
₹25,407
Closing Date
4 Jul 2022, 3:00 pmClosed
MANAGER ADMIN
KNOWLEDGE CITY SECTOR 81 MOHALI
Provision of chain link fencing around fruit germplasm and UPVC windows in Balcony in Type 3 Apts
2022_NABI_694501_1
NABI/7(252)/2021-WORKS
Open Tender
Miscellaneous Works
Works
84 days
NABI CAMPUS
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Yes
NABI
₹25,407
Yes
24 Aug 2022
13 Jun 2022
5 Jul 2022
13 Jun 2022
4 Jul 2022
13 Jun 2022
Earth work in excavation by mechanical means(hydraulic excavator)/manual means in foundation, trenches of drains at all levels, depth, lifts etc including dressing of sides and ramming of bottoms lift , including getting out the excavated soil & backfill again and disposal of surplus excavated soil as directed, including dewatering etc during excavation within a lead of 500m. All kinds of soil
Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : All works upto plinth level and above at all levels. 1:2:4 (1 cement(ultratech/ACC/Ambuja) : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. :- Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade. Chain link fencing test certificate to be provided by contractor.
Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work complete all in aspects as per direction of Engineer-in-charge
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer and 2 coat of enamel paint as per direction of Engineer-in-charge. Using M.S. angels 40x40x6 mm for diagonal braces
Providing and fixing of white colour sliding upvc windows (Make:- Lingel/Fenesta/AIS/LG hausys) in white colour of tentative size 1220 x 2240 mm (The size mentioned is tentative and bidder may verify at site before quoting) out of which bottom portion of approx 900 mm (tentative) to be kept fixed and rest portion at top to be divided in two sliding panels on two track sliding system. The frame should be atleast 62 mm +-2mm , 8 mm toughened clear glass (Make:- AIS/Modi/Gold Plus) and along with all white coloured accessories such as slider sash, rain proof lock/sealing system, rain outlet plugs,epdm,sliding pop up handles, panel profiles, cleats, etc. The cost towards any additional accessory required shall also be deemed to be included in the quote by bidder. The tentative layout is available and bidder may see it before quoting rates. The work is required to be executed in G+8 storey building (33 mtr high) on exterior side. Hence, bidder is advised to include cost towards all the tools, plants, scaffolding, spider web/mast/propeller etc in their bid. Also, if required, the existing railing is to be re-located and cost towards same including any material, labour, fabrication shall be deemed to be included in quote. Two nos complete sets of accessories such as handles, etc to be provided free of cost by bidder for future maintenance by Department. The cost shall also include any insurance cost during travelling of material, GST, carriage, loading, un-loading, assembling, labour cost, wastage, sealing all joints with white coloured weather proof silicone of make Wacker, Dowsil, GE-Momentive etc complete in all aspects as per directions of Engineer-in-charge. Succesful bidder to provide final design showing precise dimension, accessory samples, fixing arrangements for approval from Engineer-in-charge before mass production.
Providing and fixing of white colour sliding upvc windows (Make:- Lingel/Fenesta/AIS/LG hausys) in white colour of tentative size 920 x 2240 mm (The size mentioned is tentative and bidder may verify at site before quoting) out of which bottom portion of approx 900 mm (tentative) to be kept fixed and rest portion at top to be divided in two sliding panels on two track sliding system. The frame should be atleast 62 mm +-2mm , 8 mm toughened clear glass (Make:- AIS/Modi/Gold Plus) and along with all white coloured accessories such as slider sash, rain proof lock/sealing system, rain outlet plugs,epdm,sliding pop up handles, panel profiles, cleats, etc. The cost towards any additional accessory required shall also be deemed to be included in the quote by bidder. The tentative layout is available and bidder may see it before quoting rates. The work is required to be executed in G+8 storey building (33 mtr high) on exterior side. Hence, bidder is advised to include cost towards all the tools, plants, scaffolding, spider web/mast/propeller etc in their bid. Also, if required, the existing railing is to be re-located and cost towards same including any material, labour, fabrication shall be deemed to be included in quote. Two nos complete sets of accessories such as handles, etc to be provided free of cost by bidder for future maintenance by Department. The cost shall also include any insurance cost during travelling of material, GST, carriage, loading, un-loading, assembling, labour cost, wastage, sealing all joints with white coloured weather proof silicone of make Wacker, Dowsil, GE-Momentive etc complete in all aspects as per directions of Engineer-in-charge. Succesful bidder to provide final design showing precise dimension, accessory samples, fixing arrangements for approval from Engineer-in-charge before mass production.)
M/S Mittal Construction Company
Jagdamba Builders
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .