REPAIRS / RENEWAL OF LT POLES, FLOOD LIGHTS, HIGHWAY LIGHTS AT 512 ABWS AND CAFVD UNDER AGE E/M-II IN GE (CENTRAL) KHADKI.

Amount

Supply, Laying , jointing and testing 10 Sqmm 2 core LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable , laid in trenches/ducts or fixed to poles/walls including cable gland of suitable sizes and aluminium lugs for connection complete all as specified and directed.

Description all as per item No 1 above but 10 Sqmm 4 core

Description all as per item No 1 above but 16 Sqmm 4 core

Description all as per item No 1 above but 25 Sqmm 4 core

Description all as per item No 1 above but 35 Sqmm 3.5 core

Description all as per item No 1 above but 50 Sqmm 3.5 core

Description all as per item No 1 above but 70 Sqmm 3.5 core Note for Item No 1 to 7 :- (i) During earth work for laying of cable, any damage to the existing services will be made serviceable without any extra cost within 24 hrs. (ii) Credit of Sch for cable has not been considered for complete qty because conversion of ACSR will be done at some places. (iii) Contractor should visit the site before quoting the rate for understanding the scope of work.

S&F 80 mm bore tubing 'light grade' galvanised iron with all fittings and fixed to poles, walls etc. with flat iron clamps/bolts/nuts/washers or laid in floors/under roads complete all as specified and directed.

Description all as per item No 8 above but 50 mm bore

Description all as per item No 8 above but 40 mm bore

M&L for cutting through existing bituminous road /PCC/floor/Stone block Tank road along cross section of the road for laying of GI tubing/RCC pipe for encasing of cable and repairing the road to match with the original finishes complete all as specified. NOTE :- Contractor should visit the site before quoting the rate & GI Pipe will be measured and paid seperately in respective item.

Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in hard / dense soil complete all as specified and directed.

Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in soft/disintegrated rock complete all as specified and directed.

M&L for sand/fine dust cushioning to under ground cable providing with a layer of and 08 cm thick before laying of cable and 15 cm after laying of cable in trenches, hand punning complete all as specified and directed by Engr-in-charge NOTE :- punning thickness of 18 cm will be measured for payment

Supplying and laying precast, PCC LT cable cover, class LV, type flat , size 250mm x 150mm x 40mm complete for protection of underground cable all as specified and directed.

Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed

Removing of excavted soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Supply and errect in true vertical position steel tubular swaged poles in replacement complete with MS base plate of 6mm of size 300mm X300mm finial taper plug,pole cap,bolts,nuts and washers screws,pole made out of ERW MS tubing as per IS-1161 and pole shall be as per IS-2713 Part II type 410 SP-31 (9.00 Mtrs Long) complete including one coat of red oxide zinc chrome primer and two coats of Aluminium paint for exposed surfaces and two coats of black bitumenous paint for portion embedded in concrete complete including dismantling old pole and removing from site all as specified and as directed NOTE :- Excavation and earth work ,PCC in foundation /plinth block/coping shall be measured and paid for separately

Supply and errect in true vertical position LT electric pole, GI Octogonal Pole, hot deep galvanised, with base plate of 220x220x12 mm thick, 09 Mtrs Long, top dia 70mm, bottom dia- 135mm, thickness of sheet- 3 mm, including Single arm GI bracket, inbuilt cable junction box with door, connection plate, MCB 6A, duly connecting existing LT UG cable, cable lugs, work included necessary earth work and RCC foundation as per manifacturers recommendation complete all as specified and as directed . Make: Bajaj / Crompton or as approved by GE NOTE :- Earth work, PCC foundation as per manufacturer recommendation included in the unit rate.

Supply and errect in true vertical position LT electric pole, Octogonal Pole, hot deep galvanised, with base plate of 220x220x12 mm thick, 07 Mtrs Long, top dia 70mm, bottom dia- 135mm, thickness of sheet- 3 mm, including Single arm GI bracket, inbuilt cable junction box with door, connection plate, MCB 6A, duly connecting existing LT UG cable, cable lugs, work included necessary earth work and RCC foundation as per manifacturers recommendation complete all as specified and as directed . MAKE :- Bajaj / Crompton or as approved by GE NOTE :- Earth work, PCC foundation as per manufacturer recommendation included in the unit rate.

Supply and fix GI ring bracket on GI octagonal pole complete all as specified and as directed by Eng-in-Charge

M&L for cement concrete 1 : 4 : 8 type D-2 using 40 mm graded aggregate as in foundation for pole including necessary form work all as specified and directed

M&L for cement concrete 1 : 2 : 4 type B-1 using 20 mm graded aggregate as copping of pole , filling and mass concrete necessary form work all as specified and directed.

Material and labour for filling and spreading stone aggregate using 40 mm grade trap stone aggregate around 4 pole , 2 pole structure and transformer etc.

M&L for dismantling of ACSR conductor HT/LT on any type of pole, cradle guard and earthing wire complete all as specified and directed by Engr-in-Charge.

Supply, stringing, streching and binding in replacement with insulator, ACSR conductor (Weasel /ferret/Mink) on HT/LT Poles including providing of necessary jumpers, connecting all existing incoming and out going connections, trimming of trees approximately 2 mtr around conductor etc all as specified & directed.

Lopping / prooning of tree branches upto the extend to obtain clearance all around the LT over head lines / HT over head lines conductor upto 1 mtr from furthest conductor on pole including removing of cut branches and cleaning of site complete all as directed. NOTE : - (a) The trees branches etc will be removed from site and stack as directed and will not be carried away by the contractor as the wood belongs to CEO / DEO. (b). Prooning of all tree branches in per Span (not less than 30 Mtr) in HT/ LT OH Line shall be measured as one Job. (c). Contractor will employ sufficient labour to complete the job with in time as directed. (d). Contractor will be responsible for any type of mis-happening / accident while prooning the trees. (e). Contractor supervisor will take proper shut down from MES installation before starting the work and clear it before resuming power supply . (f). The contractor will provide proper tools and safety devices to his staff for prooning of trees.

M&L in replacement Cross arms, bracings, supports,clamps and back plates fabricated from structural steel sections including nuts,bolts,washers, welding , bending cold or hot, drilling holes for bolts,in any shape or sizes as indicated or directed and inclusive of one primer coat and two coats of alluminium paint complete all as specified and directed

Supply and fix pin type porcelain , vitreous white, brown or green insulator including galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100mm height, 65mm dia wahsers, bolts etc as working pressure 1100 volts complete all as specified and directed.

Supply and fix shackle type porcelain , vitreous white, brown or green insulator including galvanised mild steel straps, wahsers, insulator bolts, wahsers and nuts, as working pressure 1100 volts height in 100 mm maximum dia 115 mm section of straps in 31 x 5 mm dia of bolts 14 mm complete all as specified

M&L in replacement of u/s MCCB 415V, 3 phase 50 HZ FP 63 to 100 Amps breaking capacity 16KA. MAKE : - Legrand or equivalent in Schneider/Havells/ CG/ L&T.

M&L in replacement of u/s MCCB 415V, 3 phase 50 HZ FP 125 Amps breaking capacity 16 KA. MAKE :- Legrand or equivalent in Schneider/Havells/ CG/ L&T.

M&L in replacement of u/s MCCB 415V, 3 phase 50 HZ FP 200 Amps breaking capacity 36 KA. MAKE : - Legrand or equivalent in Schneider/Havells/ CG/ L&T.

M&L in replacement of u/s MCCB 415V, 3 phase 50 HZ FP 250 Amps breaking capacity 36 KA. MAKE :- Legrand or equivalent in Schneider/Havells/ CG/ L&T.

M&L in replacement of u/s MCCB 415V, 3 phase 50 HZ FP 400 Amps breaking capacity 37 KA. MAKE :- Legrand or equivalent in Schneider/Havells/ CG/ L&T.

Material and labour for straight through ( Heat Shrinkable) cable jointing kit for 1.1 KV grade cable complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25 to 50 Sqmm including dismantling the old burnt cable joint termination.

Material and labour for straight through ( Heat Shrinkable) cable jointing kit for 1.1 KV grade cable complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 to 150 Sqmm including dismantling the old burnt cable joint termination.

Supply and fixing street light mounting bracket, made out of Light grade GI Tubing 32 mm bore , bend into shape inner angle not less tan 120° and over all length not less tan 1.0 Mtr including suitable size clamps made from not less than 25x3 mm ms streep , Nut, bolts 12 mm dia with washers complete fixing arrangement.

Supply and fix LED street light 90W including making electrical connection to the fitting with Suitable size of service wire . Cat Part No. TRP-411-90-57-SL-GL-NSG. MAKE :- Crompton Raptor Neo or equivalent

Supply and fix LED flood light 100W including making electrical connection to the fitting with Suitable size of service wire including dismantling of old one complete all as specified & directed by Eng-in-Charge.Cat part No.Rover pro CFS-504-100-57-60D-SL-GL-NSG. MAKE :- Crompton or equivalent

Supply and fix LED flood light 120W including making electrical connection to the fitting with Suitable size of service wire including dismantling of old one complete all as specified & directed by Eng-in-Charge.Cat part No.Rover pro TFS-504-120-57-60D-SL-GL-NSG. MAKE:- Crompton or equivalent

Supply and fixing at 5 to 9 mtr height-100W Industrial LED Highbay luminaire with > 100 Lm/W, with complete all accessories having IP 66 degree of protection, power factor >0.95,THD<10%, potted driver, Internal Surge Protection-4KV & External Surge Protection-10KV,LED Source including safety chain with i bolt complete all as specified and directed by Engineer-in-Charge.Cat Part No SLE HB 100W COMET NEO-N MAKE :- Surya or equivalent NOTE :- The quoted rates are deemed to be included the cost of Nut-bolts washars or clamps required to be replaced if old one are found unserviceable.

Supply and fixing at 5 to 9 mtr height-120W Industrial LED Highbay luminaire with > 100 Lm/W, with complete all accessories having IP 66 degree of protection, power factor >0.95,THD<10%, potted driver, Internal Surge Protection-4KV & External Surge Protection-10KV,LED Source including safety chain with i bolt complete all as specified and directed by Engineer-in-Charge.Cat Part No SLE HB 120W COMET NEO-N MAKE :- Surya or equivalent NOTE :- The quoted rates are deemed to be included the cost of Nut-bolts washars or clamps required to be replaced if old one are found unserviceable.

Supply and fixing at 5 to 9 mtr height-150W Industrial LED Highbay luminaire with > 100 Lm/W, with complete all accessories having IP 66 degree of protection, power factor >0.95,THD<10%, potted driver, Internal Surge Protection-4KV & External Surge Protection-10KV,LED Source including safety chain with i bolt complete all as specified and directed by Engineer-in-Charge.Cat Part No SLE HB 150W COMET NEO-N MAKE :- Surya or equivalent NOTE :- The quoted rates are deemed to be included the cost of Nut-bolts washars or clamps required to be replaced if old one are found unserviceable.

Supply and fixing in replacement of PVC insulated and sheathed unarmoured two core aluminium conductor service cable 2 core 2.5 sqmm 220 volt to be replaced in existing fittings including dismantling and taking out old burt electric cable all as directed .

Supply and fixing in replacement of PVC insulated and sheathed unarmoured two core aluminium conductor service cable 2 core 4 sqmm 220 volt to be replaced in existing fittings including dismantling and taking out old burt electric cable all as directed .

Supply and fixing in replacement of PVC insulated and sheathed unarmoured two core aluminium conductor service cable 2 core 6 sqmm 220 volt to be replaced in existing fittings including dismantling and taking out old burt electric cable all as directed .

Supply and fixing in replacement of PVC insulated and sheathed unarmoured two core aluminium conductor service cable 2 core 10 sqmm 220 volt to be replaced in existing fittings including dismantling and taking out old burt electric cable all as directed .

Supply and fix PVC sheathed 1100V grade flat three core stranded aluminium conductor of size 2.5 sqmm including conduit pipe connecting from SMC box to street light fitting Complete all as specifed and directed by Eng-in-Charge

Disconnecting and taking out existing SMC of any size and in any position on pole and Supply and fix in repair sheet moulding compound junction (SMC) suitable for terminating 2 Nos 4 x 6/10/16 Sqmm UG cable including S&F of one in Nos MCB SP 6-32A including cable glandes- 2 Nos, and two way connector 1 No, including dismantling old one. MAKE :- Sintex

M&L for disconnecting LT XLPE cable of any size from LT Panel or any location as directed for finding fault and M&L for defect rectification underground cable laid in trenches or any location by locating fault with the help of electronic fault locating machine comprising of surge generator pulse, ECHO fault locator with high frequency distance calculator etc. all as directed. NOTE :- (i) The fault locating equipments will be brought to site within the 12 hours of instruction from Engr-in-Charge. (ii) Complaint will be notified to contractor on mobile phone at any time between 0800 hrs to 2200 hrs and has to be rectified within 12 hours after notification, failing which Rs 500/- per day per complaint will be recovered from the dues to the contractor. (iii) Rates included necessary earth work for opening cable for ready to jointing.

Supply, installation, commissioning and testing of outdoor type Outgoing Bus Bar LT panel box, platform mounted, suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos Aluminium bus bar, of capacity 250 Amps fabricated in factory having modern fabrication duly powder coated painting, dust and vermin proof and degree of protection not less than IP-55 . The panel shall be made out of 3.00mm thick CRCA mild steel sheet , front door (01 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and suitable angle iron mounting base frame at bottom min 0.6 Mtr above ground level incl PCC work. (a) Incommer:- MCCB 4 pole 250A, 36kA, thermal & magnetic release - 01 Nos Make: Legrand or ABB/ Schneider/Havells

Supply, installation, commissioning and testing of outdoor type Outgoing Bus Bar LT panel box, platform mounted, suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos Aluminium bus bar, of capacity 100 Amps fabricated in factory having modern fabrication duly powder coated painting, dust and vermin proof and degree of protection not less than IP-55 . The panel shall be made out of 3.00mm thick CRCA mild steel sheet , front door (01 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and suitable angle iron mounting base frame at bottom min 0.6 Mtr above ground level incl PCC work. (a) Incommer:- MCCB 4 pole 100A, 16kA, thermal & magnetic release - 01 Nos MAKE :- Legrand or ABB/ Schneider/Havells

M&L for earthing complete with hot dip galvanized steel pipe in pipe electrode, outer pipe 88mm dia medium grade and inner pipe 55 mm dia including testing, 3 mtr long and having 50x6 mm terminal on inner pipe to connect earthing strip with 14 mm holes for nut bolts, buried directly and vertically in ground with top edge at 30 cm below ground level after making bore hole of 100 mm dia and 3.3 mtr deep using suitable mechanical drilling machine (for drilling near the specified bldg) connected with galvanized steel earthing lead of 32x6 mm strip with minimum two Nos of GI nut bolits and connected to test point from earthing pit. The electrode pipes should be filled with 2x 25 kg bags of carbon based earthing compound. The resistance of the compound should be less than 0.1 Oms . The compound should be highly conductive, hygroscopic, non magnetic, non corrosive in nature and have best moisture retaining qualities with ph value between7-9. Connected to the earthing test point, Fiber reinforced plastic pit not less than 300x300 mm with pit cover, including necessary returning filling & removal of extra soil , to achieved earth resistance value less than 5 Oms including testing complete all as specified Make U-Protect or equivalent NOTE :- IF the desired result not obtained after testing the contractor should do re-eathing without any extra cost.

M&L for connecting galvanised iron GI strip 32 X 6 mm, in replacement to the existing earthing to eqpts complete all as specified and as directed.

M/S. Niksun Electro-Infra Private Limited

ONKAR ELECTRIC AND GENERAL STORE

Mahindra Electric Stores