Three Years Maintenance Work (Patri Dressing, Jungle Cleaning, Drain Cleaning and other Miscellaneous Civil Work) of Abadi Plots in Village Ghori Bachera, Greater Noida

Jungle Cleaning & Patri Dressing

Cleaning jungle including up rooting of rank, vegetations grass, push, wood trees and samplings of grith upto 30 cms.measured at a height of 1 M. above ground level and removal of rubbish up to a distance of 50M. out side the removal of rubbish upto area cleared. SOR/259(i) Same as above but grass only SOR-20/259(a)/4.06

Surface dressing of the ground including removing vegetation and in equalities not exceeding 15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m (All kind of soil) DSR-18/2.28.1

Tractor with trolley including POL driver (AR/GNIDA) SOR-20/SL.NO.19/ Chapter 2

Supply of labour SOR-20/SI.NO.12/Chapter 2

Part - Drain Cleaning

Excavation in foundation in ordinary soil (loam,clay or sand) icluding lift up to 1.50 m. and lead up to 30m. and including filling watering and ramming of excavated earth into the trenches or into the space of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge upto a distance of 30m. from the foundation trenches ( where machine con not rech/move).SOR-251a

Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as required. (DSR-2018/2.24.1/A.R.)

CARTAGE OF Earth of fly ash when added to schedule item no. 253

lead upto 2 KM. (SOR-261C)

Miscellaneous Civil Work

Cement concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (UPPWD/SOR-2020/281)

M-150 Brick Work1:4 one cement & four Coarse sand of 2.20 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work. SOR-2020, item-305(a)

12 mm cement plaster of mix

1:6 (1 cement: 6 coarse sand) DSR-18/13.4.2

Cement concrete with 2cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (UPPWD/SOR-2020/279(a))

Providing JCB with driver and including POL (AR/GNIDA) (SOR-20/S/NO. 31/Chapter 2)

Plain Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M25 using batching plant transit mixer & manual placing . MORTH-9.06 D/Case-II

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:3:6 or richer mix (including equivalent design mix) (DSR-18/15.2.1)

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications RCC Grade M-25 using batching plant transit mixture and manual placing (MORTH-20, Item No. /9.06/E/case-II)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more. (Sail Steel) (DSR-2018/5.22.6/AR)

Supply of dewatering pump 10 H.P (MORTH/P.NO.746/S.NO 109)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (Sail Steel) (DSR-2018/10.25.2/AR)

Hiring of portable Re-cycle jetting calus section machinenmounted on mahindra volero maxi with hydraqulically operate mahindra de-silter upto depth of 15 water with driver for the area to gr.noida as direated by engineer in-chare for 8.50 hours per day overfine will be paid on pro rate basic processure 3000 PSI liters, rate as per noida (GNIDA)

Tractor with water tanker with cost water including POL SOR-20/SI.NO.27/Chapter 2

Providing and fixing R.C.C direction board size 200x510x80mm make in one 1:1.5:3 including rainforcemant and shuttring etc. all complete direction of Engineer-in-Charge

Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm ISI no. 105/106/133-1950.As in item (647) above but for every subsequent coat on previously treated surface SOR-20/647

Painting letters up to 2.5 cm. size including supply of all materials, labours & tools and plants etc. required for proper completion of SOR-20/817 As in item 817 above 8cm. but up to 15cm. SOR-20/819/21.04

Labour Cess and GST will be paid extra as per govt.orders