COMPREHENSIVE MAINT OF B/R WORKS AND PERIODICAL SERVICES INCLUDING E/M WKS I.E. REPAIR/MAINT OF INTERNAL ELECTRIFICATION, FITTING AND FIXTURES AND ALL CONNECTED ITEMS IN SQAE (OFC), KPR, DSC LINE, SERVICE OFFR MESS, SQAE (SA) AND OTHER CONNECTING ARE

Amount

M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of white wash complete all as specified and directed.

M&L for Preparation of old decorated surfaces of ceiling, including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of white wash complete all as specified and directed.

M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of cement base paint with brush complete all as specified and directed.

Complete removal of existing treatment i.e. white wash,colour wash ,distempering etc. applying Two coats of cement base paint (approved colour) over and including a coat of primer on wall complete all as specified and directed.

Complete removal of existing treatment i.e. white wash, colour wash, cement paint etc. on wall and ceiling with help of hand opeated sander or by manual where it is feasible and preparing the surfaces smooth including necessary repair to depressions/cracks by wall care putty/POP & apply a coat of exterior water based primer with aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine and applying two coat of exterior weather proof anit algae (Product : Asian Paints Apex) 100% acrylic emulsion with maximum working pressure of 3300 PSI by Trucare Graco machine and capable of operational single spray gun with a maximum materials hose length 150m working,complete all as specified and directed.

M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of oil bound distemper (any Colour) on wall with brush complete all as specified and directed.

Complete removal of existing treatment i.e. white wash ,colour wash ,distempering etc. of wall and applying two coats of oil bound distemper (any colour) over and including a coat of primer and a coat of 1mm thick wall care putty with the help of machine (mechanically) on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc complete as per manufacturer's instructions complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based materials of any description not other wise described over 10 cm width or girth and applying one coat of Synthetic Enamel paint (any colour) complete all as specified and directed.

M&L for preparation of old painted surfaces of iron and steel based materials of any description not other wise described over 10 cm width or girth and applying one coat of Synthetic Enamel paint (any colour) complete all as specified and directed.

Demolition of brick work or stone/boulders masanory built in cement mortar including all quoins, arches, pillars etc, but excluding ashler facing, dressed stone work and precast concrete articals complete all as specified and as directed.

M&L Brick work old size sub class ' B' bricks straight or curved in plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L Brick work (except bricks) old size sub class ' B' brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubing down with water etc complete all as specifed and directed.

M&L 15mm thick rendering on fair faces of brick wall in CM (1:4) finished even & smooth complete with using WPC @ 3% of cement weight or as per manufacturer instruction complete all as specified and directed. Note WPC shall be measured and paid separately.

M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of concrete or brick, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick cement plaster on ceiling in CM (1:3) finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls including cornices plaster etc and applying two coat oil bound distemper of any colour on over and including a coat of primer over and a coat of wall care putty including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc complete all as specified and directed.

M&L for preparation of new surfaces of wall and Applying two coats of cement base paint over and including a coat of primer complete all as specified and directed.

M&L preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450x300 mm & 6 to 7 mm thick on vertical surface of walls such as in dado, skirting etc; including and jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and directed

M&L for 7 to 8 mm thick non skid ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over & including 15mm thick screed bed in CM(1:6) complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutters from the frame) n. exc 1.5 sqm complete all as specified and directed.

S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 250 mm length of bolt complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet reinforced with MS Square tube edges will be painted to match with prelam sheet as per specification & drawing incl. making good the damaged wall with plaster or concrete complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face as per specification complete all as specified and directed.

S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel pin, anodised and fixed, Type C-21 complete all as specified and directed.

Supply and fixing 150 mm aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm size extuded aluminium handle fabricated type anodized complete all as specified and directed.

S&F 3 track window frame(124mmx50mm) shutter of uPVC solid foam profile window sill element FP 12419 (124mmx19mm thick) and 3 track sliding element FP 7132(71mmx32mm) grooved sill element. Sliding shutter are made of vertical and horizontal stile element FP7128(71mm Wx 28m thk) having GI 'C' section (39mmx19mmx19mmx0.60mm thick stiffener and telescopic 'L' corner, Infill panel is clear to translucent PC sheet Or 5 mm thick glass is fixed in the shutter using beading element 12 mm W x 10mm thk by SS headless nails including SS wirecloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with S.S staple pins window frame is strengthen by GI clamps (120x120x75mm) at all four corners. External /internal cover moulding/architrave is provided to cover gap between masonary wall and frame due to plumbing error in masonary work and elegant look all complete all as specified and directed.

S&F aluminium chequered grills, weight n.exc .0.50 kg/sqm complete all as specified and directed.

M&L for Easing of door / window shutters of any size / any number of panels for easy closing / opening tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden /metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick figured glass pin haded type and glazing with oil putty in squares n. exc 0.5sqm in each pane complete all as specified and directed.

S&F in 3mm thick Sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane including hacking out complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and 1.40 mm averaage width of aperture fixed with tinned tacks or galvanised wire staple complete all as speficied & directed.

S&F in repairs Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specifed.

S&F in repair Towel rail 20mm dia, 60cm long brass chromium plated with brackets complete all as specified and directed.

S&F in repairs waste pipe for Sink/WHB/Urinal, length exc 0.75m complete all as specified and directed.

S&F in repairs, stainless steel curtain rods of 20mm dia as in doors/ windows pelmets.SS brackets fancy type, including screws and other necessary fitting for fixing brackets SS Funnels for 20 mm dia dropry rods, fixed at each end of rods complete all as specified and directed.

Taking down wall panelling,wooden flooring and similar work complete all as specified and directed.

S&F 5mm thick plain/printed coloured PVC sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, Insulated PVC wall Lining, and solid PVC partitions inclusive of Solvent cement at site complete as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed.

Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling all as specified 605 x 605mm complete all as specified and directed.

S&F Hanger 6mm dia GI (upto 1200mm lenth) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40 X 3mm size 60mm long and expansion hold fasterers 12.5 mm dia 40 mm long complete all as specified and directed.

Providing & fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

S&F in repair vitreous china wash basin white flat back of size 550mmx400mm excluding taps,but including waste coupling, waste pipe, chain and plug and porcelain stopper and brackets etc. complete as specified and directed.

S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position 500 Ltrs Capacity incl Dismantling water tanks & removing to store complete all as specified and directed.

Demolition of unreinforced concrete in ground floors and pavings n exc 15 cm thickness including floor finishes complete all as specified and directed.

M&L 25 mm thick PCC type B-0, 1:2:4 (using 12.50 mm graded stone aggregates) as in floors complete all as specified and directed.

S&F Chequered cement concrete tiles 20cm x 20cm x 25mm thick,with grey cement and pigments set, over and including 15 mm thick screed bed in cement mortar (1 : 6) jointed and pointed in cement mortar neat cement slurry in floors complete all as specified and directed.

M&L Machine cut kota stone slab flooring 18-20 mm thick over and including 15mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

Attending complaints for checking of the existing defective electrical items for continuous electric supply including carrying out minor repair as required to make the item functional, attending minor repair(s) such as testing, connectins, fittings, nut, bolts, screws etc to emergent complaints i.e no light, earth leakage, short circuit, neutral break in mains/sub mains/internal circuits of existing electical system of main building/block and making continuous electric supply including carrying out minor repairs etc.. required to make the system in order/functional with insualtion tape roll, copper thimbles, glands, earthing wire as required at site complete all as specified and directed. Notes :- This item is applicable only where no store is required. 1. The site for attending complaints are Officer complex , DSC Line, NAI, DGAQA, DSC Quarters, Service officer mess and KPR area of SQAE (A) Kanpur. Contractor shall provide minimum one tradesmen (electrician) for each site to attend the complaint in all working days between 0830 hrs to 1700 Hrs including holiday and Sunday. 2. Contractor shall ensure the security passess for his staff, to be obtained from concern authority for attending complaints. 3. The contractor will ensure that the electicians with necessary tools bag shall always remain present at complaint cell to attend the Complaints. 4. A recovery of Rs 500/- for not attending the complaint upto 24 hours and after 04 hours Rs 1000/- shall be recovered from the contractor due. 5. All the complaint slip, register & other connected document will be provided by the contractor without any extra cost .6. Proper record (date wise) of complaints received & rectified by the contractor and the same may be asked for verification at the time of payment of each RAR/Bill.

Taking down copper/aluminium point wiring (light, fan, socket or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting fans etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls floors etc complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volt FRLS grade ISI marked with multistranded copper conductor drawn through and including concealed conduit in / on wall/ceiling with provision of 1.5 sqmm single core cable green in colour PVC insulated copper conductor as earth continuity conductor connected to earth dolly complete all as specified and directed for following:- a). One light/ fan/Exhaust fan point controlled by one 05 Amps switch.

All as per item No 61.00 above but One socket out multi pin 5 Amps controlled by one switch on independant board complete all as specified and directed.

All as per item No 61.00 above but One socket out multi pin 5 Amps controlled by one switch on same board complete all as specified and directed.

All as per item No 61.00 above but for one socket out let 2in1 5 and 15 Amps with 2.5 Sqmm PVC insulated copper conductor and provn of 2.5 sqmm PVC insulated single core copper cable green in colour as earth continuity conductor complete all as specified and directed.

All as per item No 61.00 above but for one socket out let 2 in 1, 5 and 15 Amps or AC point with 4 Sqmm PVC copper conductor and provn of 4.0 sqmm PVC insulated single core copper cable green in colour as earth continuity conductor complete all as specified and directed.

S&F in switch piano 5 Amps one way complete all as specified and directed.

S&F socket 6 Amps multi purpose flush type complete all as specified and directed.

S&F Switch 15 Amps flush type complete all as specified and directed.

S&F socket 2 in one, 5 and 15 Amps flush type complete all as specified and directed.

Supply and fix electronic fan regulator step type 100 watts 5 step huming free operation complete all as specified and directed.

S&F ceiling rose 2 to 3 terminal backelite complete all as specified and directed.

S&F modular switch flush type 6 Amp single pole one way, one module complete all as specified and directed.

S&F modular socket out let 3 Pin 6 Amp, flush type 240 Volt, 2 module complete all as specified and directed.

S&F modular switch one way, flush type 15 Amp 240 volt, one module complete all as specified and directed.

S&F Modular socket out let 2 in 1, 3 pin 5 & 15 Amp, 240 volt, 2 module complete all as specified and directed.

S&F Angle holder PVC batten type suitable for 240 V 50 Hz AC supply complete all as specified and directed.

S& F modular Electronic ceiling fan regulator, 120 W , 2 module step type complete all as specified and directed.

S&F Modular white cover plate with frame 3 module complete all as specified and directed.

S&F Modular white cover plate with frame 4 module complete all as specified and directed.

S&F Modular white cover plate with frame 6 module complete all as specified and directed.

S&F modular metal flush box 3 module complete all as specified and directed.

S&F modular metal flush box 4 module complete all as specified and directed.

S&F modular metal flush box 6 module complete all as specified and directed.

S&F in replacement Industrial socket single pole and enclosure with a two pin and earth plug with one single pole MCB 20A (Modular Power unit with 25 Amp MCB & 16 Amp Plug) complete all as specified and directed.

S&F rigid non metalic PVC conduit/ casing caping inclusive fixing accessories for fixing on wall/ceiling/beam of 20mm size complete all as specified and directed.

S&F rigid non metalic PVC conduit/ casing and caping inclusive of fixing accessories for fixing on wall/ ceiling of 25mm size complete all as specified and directed.

Supply and fix in replcement MCB DB double door type single phase with common eath and neutral bus and 200 amps copper bus bars, 240 volts,08 way complete all as specified and directed.

All as per item No. 87.00 above but MCB DB double door of 4 way complete all as specified and directed.

Supply and fixing in repair TPN DB's 4 way vertical type 415 V, double door suitable for housing of 100 Amps MCCB as main incoming complete all as specified and directed.

S&F MCCB capacity 100 Amps, fixed thermal and magnetic release, 4 Pole, 16 KA suitable to be fixed in 4 way TPN DB complete all as specified and directed.

S&F MCB SP 6-32 Amps, 10 KA, 'C' series complete all as specified and directed.

S&F MCB SPN 32 Amps, 10 KA, 'C' series complete all as specified and directed.

S&F MCB SP 40 Amps, 10 KA, 'C' Series complete all as specified and directed.

S&F MCB SPN 40 to 63 Amps, 10 KA, 'C' Series complete all as specified and directed.

Supply and fix in replacement MCB TPN 10 KA 415V, of capacity 40 to 100 amps C series complete all as specified and directed.

Taking down old unserviceable aluminium sub main wiring and S&F sub main wiring for circuit of size 10 sq mm 2 core alongwith earth wire of 10 sq mm single core of FRLS PVC insulated unsheathed cable (FR), 1100 volts grade with multistranded copper conductor, conforming to IS-649, 1100 V grade and drawn through and including PVC non metalic rigid conduit/casing of suitable size and conduit/casing accessories run on surface of wall/ceiling etc and connecting terminal ends of suitable size complete all as specified and directed.

All as per item No. 96.00 above but with wire 6 sq mm 2 core with 6 sq mm single core as earth continuity complete all as specified and directed.

All as per item No. 96.00 above but with wire 4 sq mm 2 core with 4 sq mm single core as earth continuity complete all as specified and directed.

All as per item No. 96.000 above but with wire 2.5 sq mm 2 core with 2.5 sq mm single core as earth continuity complete all as specified and directed.

M&L for earthing with GI plate electrodes of size 600x600x6.3mm thick buried directly in ground earth pit not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m below ground level connected to GI wire 4 mm as earthing lead fixed by means of nut bolt washer of brass as shown in electrical plate No.3 of SSR Pt-I 2009 including necessary excavation and earth work in any strata, GI pipe 20mm dia light grade for watering , and 15 mm light grade as protrection to earth wire upto 7.5 mtr ,charcoal & salt etc and PCC chamber in PCC 1:3:6 type C1 covered with 40mm thick RCC 1:2:4 type B1 using 20mm graded stone aggregate reinforced with 8mm dia MS bar @ 75mm C/C both ways cover, funnel & wire mesh including making of test point all as specified testing on complete all as specified and directed.

M&L earth continuity conductor or main earthing lead fixed to wall or battens or recess or chases or buried in ground in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required of 4 mm dia size GI wire complete all as specified and directed.

S&F energy efficient LED light fitting [2'X2' size] with tube 36 watt or minimum lumen output is not less than 3600 lumens,230V recess mounting type including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing in repair LED street light 35 Watts, 5700 (K), suitable for primary roads, pressure die cast IP 66 LED complete with suitable size GI pipe medium grade suitable for mounting complete with suitable size of MS clamps, nuts and bolts, PVC copper wire 1.5 sq mm 3 core of required lenght (upto 3 mtrs) etc. complete all as specified and directed.

Supply and fix in repair pole/building LED flood light 100 Watts with sitable clamps nut bolts etc of suitable sizes incl wiring from pole box to Ftg complete all as specified and directed.

Supply and fixing in repair LED street light 90 Watts, 5700 (K), suitable for primary roads, pressure die cast IP 66 LED with suitable size GI pipe medium grade suitable for mounting complete with suitable size of MS clamps, nuts and bolts, PVC copper wire 1.5 sq mm 3 core of required lenght (upto 3 mtrs) etc. complete all as specified and directed.

Supply and fixing in repair surface and wall mounted LED Tube light & fitting 20 watts, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with provision PVC copper wire 1.5 sq mm 3 core of required length upto ceiling rose complete all as specified and directed.

Supply and fix in replacement condensor 2.5 MFD ISI marked suiatble for ceiling fan 1200 mm sweep complete all as specified and directed.

Supply and fix in replacement condensor 4 MFD ISI marked suiatble for ceiling fan 1200 mm sweep complete all as specified and directed.

M&L for taking town carefully storage type water heater (Geyser) vertical/horizontal type of any capacity and kept a side for necessary repairs at workshop and refix the same in its original postion after carry out repairs complete all as specified and directed.

M&L for opening of geyser assembly and replacement of heating element of (1.5/2 KW), ISI marked to match with the existing including necessary electrical connection etc complete all as specified and directed.

M&L for replacement of thermostat, ISI marked to match with the existing including necessary electrical connection etc complete all as specified and directed

M&L for opening of geyser assembly and taking out u/s glass wool, taking down carefully water storage drum and connected accessories, attesting leakage of storage drum by means of brazing and refix the same and filling the new glass wool/insulating material complete testing after carry out repairs complete all as specified and directed.

Supply and laying and testing cable in repair XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and directed.

Supply and laying and testing cable in repair XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed.

Excavation in trenches in soft/ loose soil not exc. 1.5 metre wide and n'exc. 1.50m deep for pipes, cable etc and getting out complete all as specified and directed.

Returning filling including spreading leveling watering and well ramming in layers not exc 25Cm in soft/ loose soil, complete all as specified and directed.

Removing excavated material in soft/ loose soil n'exc 50M and depositing where directed at a level n'exc1.5M above the starting point, complete all as specified and directed.

M&L for sand cushioning to U/G cable in layers of 23cm thick (8 Cm before laying the cable and 15Cm thick after laying the cable) in trenches including watering and consolidation, complete all as specified and directed. Note:- Punned thickness shall be measured and paid.

Supply and laying reinforced precast concrete cable cover class LV type I flat size 250mmx150mmx40mm as protection to cable in cable trenches complete all as specified and directed.

M&L for GI tubing (light grade) 40 mm dia bore with all necessary fitting laid in trenches/under road crossing, or fixed on poles/walls/under floor etc complete all as specified and directed.

Disconnecting electrically and opening the cover of split AC of capacity 1.5/2 ton inner/outer unit and servicing including cleaning/removing all dust / mud, oil and other foreign particle from grill, screen filter at indoor unit and condenser fin, evaporator fin at outdoor unit using detergent solution or chemical solution including servicing, oiling, greasing of air conditioner and checking of electrical connection and testing complete all as specified and directed.

S&F in replacement of Air blower moter suitable for window/split type AC of 1.5/2 Ton capacity single phase complete all as specified and directed.

S&F in replacement of sealed compressor, rotary type, of existing size and make suitable for split type AC of 1.5/2 Ton capacity complete all as specified and directed.

S&F in replacement of Inlet / outlet control valve for outdoor / indoor unit of existing size, of any make & any type complete all as specified and directed.

Supply and fixing of micron filter suitable for window / split type AC of 1.5 /2 Ton capacity complete all as specified and directed.

S&F in replacement of Main control circuit (PCB) for window /split type AC's, of existing model / make complete all as specified and directed.

S&F in replacement of Main control circuit (PCB) for inverter type split type AC's, (indoor & out door) of existing model / make complete all as specified and directed.

Sagar Electricals (BID ID -3330000)

M/s Raghvendra Traders (BID ID -3333124)

M/s raj constructions (BID ID -3341283)