Special repair of District Industries Centre Gurugram (pdg. street security light and D.G. set).

Amount

Earth work in excavation in fundations, trenches, etc in all kinds of soils, not exceeding 2 Meter depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsquent filling around masonry in 15 cm layers with compaction, including disposal of all surplus soil as directed with a lead of 30 metes.

Cement lime concrete 1:8:16 with brick blast 40mm nominal size in foundation and plinth.

Cement concrete 1:2:4 with slone aggregate 20mm nominal size in foundation and plinth.

First Class bricks work laid in cement sand mortar 1:6 in foundation and plinth

11:43 cm thick bricks wall laid in cement sand mortar 1:4 without rainforecement, in foundation and plinth.

Conglomerte floor 50 mm thick CC topping 1:2:4

12 mm thick cement plaster 1:6

Mild steel reinforcement for RCC works where not included in the complete rate of RCC, including bending, binding and placing in position complete

Wires and Cables Suply and erection of PVC copper insulated and sheathed 2-core circular flexible wire.Size 1.50 sqmm ( 48 / 0.20mm).

Moulded case Circuit breakers.Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections.15 amp.to 60 amp. 415 V ,10 KA 3-phase.

Supply and erection of miniature circuit breaker/ isolator 240/415 V in the existing distribution board including making necessary connection. Miniature circuit breakers of 9 KA breaking capacity.SP MCB of 6 amp. to 32 amp.

SPN MCB of 6 amp. To 32 amp.

Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Galvanised iron pipe 50 mm dia on flushed.

Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

Extra for using salt and charcoal / coke for pipe earth electrode as required.

Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required .

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material.

Supply and erection of under ground cable 1 metre below ground level covered with sand and bricks including necessary connections,digging and refiling of trenches. 16 Sq. mm 4 Core Ard. Cable .

50 Sq. mm 3.5 Core Ard. Cable .

Supply and erection of under ground cable, loose in existing pipe or trenches complete with necessary connections . 16 Sq. mm 4 Core Ard. Cable .

50 Sq. mm 3.5 Core Ard. Cable .

Supply and erection of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core .

25 Sqmm to 50 Sqmm Cable 2 to 4 Core.

Supply and erection of M.S Saddles and clamps on wall/RCC parapit for fixing the under ground cable at a distance of .60 metre centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect.

S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 mtr. Below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-In- Charge of the work HDPE pipe 63/50 mm outer dia/ inner dia.

S/E of Hot Dip Galvanized octagonal pole of 3 mm thickness, with base plate including cost of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. the foundation bolts as per manufacturer design should be hot dipped galvanized pole complete with door locking arrangement, Terminal plate consisting of 2 nos. 100 A, 4 pole natural links inclding connection etc. with suitable connecting arrangement for 2 nos. MCBs/ kit- kat including cost of RCC 1:1.5:3 for foundation of size 0.7m x 0.7m x 1.8 m with minimum 8 nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm C.C. for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work.7 Mtr. Long pole with top dia 70 mm and bottom dia 130 mm with base plate of size 220 x 220 x 12 mm

Supply and erection of 70/72 watts LED street light fittng with lense, minimum 100 lumes per watt IP 66, HP dia cast aluminium hoising including erection of same on pole with all labour and material required to complete the job in all respect upto entire satisfaction of Engineer - In- Charge.

Supply and erection of 32 amp. 3 pole/ 230 volt - digital time switch including cost of contactor, MCB for controlling the street light with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In - charge of work.

Supply and erection of single/ double arm bracket made of 50 mm dia G.I pipe B class ISI 1.5 mtr. long with 25 mm dia G.I. bottom pipe with 75 mm dia 60 cm. long G.I. collar pipe, top covered with ornamental cap duly welded, painted 2 coats of aluminium paint on bracket and golden paint on ornamental cap including erection of same with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In - charge of work.Single arm. G.I. Bracket

Supply and erection of 40/45 watt LED post top lentern including erection of same on gate pillers with anecessary nuts & bolts and making necessary connection complete in all respect upto entire satisfaction of Engineer - In- Charge.

Supply, testing & commissioning of 62.5 KVA DG set with AMF panel, Koel Green brand 62.5 KVA D.G. set, water cooled with Diesel Engine model no. 4R810TAG1 developing 83 BHP at NTP coupled with KOEL Green Alternator, fuel tank : 150 ltr., 12 Volt battery, AMF control panel and acoustic enclosure complete in all respect upto the entire satisfaction of Engineer -in- Charge of the work.

Provision for Diesel for testing purpose