ADDN/ALTN TO BUILDING NO P-3 AT AF STN CHANDINAGAR UNDER AOR OF GE (AF) FARIDABAD

Amount

Taking down chowkats or frame with shutters (without taking off shuttters from frames) size exc 1.5 Sqm but not exc 4 Sqm each each and removing from site and making good disturbed surfaces as per existing specifications complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shuttters from frames) size n .exc 1.5 Sqm and removing from site and making good disturbed surfaces as per existing specifications complete all as specified and as directed.

Demolition of brick work built in cement mortar in any position including all quoins, arches & pillars etc complete all as specified and directed.

Surface dressing n.exc 15 cm deep and getting out in loose / soft soil complete all as specified and directed.

Excavation in trenches not exc.1.5m wide and not exc.1.5m deep for foundation, cables, poles etc, not exc 10 Sqm on plan getting out as in hard / dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removal of surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in foundation, filling, mass concrete etc, complete all as specified and directed.

M&L Reinforced cement concrete M-25 design mix (20 mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L Reinforced cement concrete M-25 design mix (20 mm graded stone aggregate) in Columns, pillars,piers,posts and struts complete all as specified and directed.

M&L Reinforced cement concrete M-25 design mix (20 mm graded stone aggregate) as in Chhaja complete all as specified and directed.

M&L Reinforced cement concrete M-25 design mix (20 mm graded stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L Reinforced cement concrete M-25 design mix (20 mm graded stone aggregate) in Beams, cantilevers, bressummers complete all as specified and directed.

M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick rough finished (Horizontal or sloping)complete all as specified and directed.

M & L for use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges in rough finished flat surface of concrete complete all as specified and directed.

M & L for use & waste formwork to sides of concrete foundations, footings, bases of columns , raft and raft beams , sides and soffits of foundation and plinth beams and similar work vertical or better for rough finished surfaces of concrete complete all as specified and directed.

M&L for use & waste Form work to pillars, posts, struts, piers, columns and stachions with rough finished, square, rectangular or polygonal concrete surfaces complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 6 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for plain cement concrete M-15 Nominal Mix (1:2:4) (using 20 mm graded stone aggregate), as in lintels upto 1.5 m clear span, cills, steps,seismic and other similar bands, plinth course, string courses, lacinng courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Material and labour for rendering 15 mm thick in CM 1:6 on fair faces of brick or concrete surfaces of walls, facia etc to be finished even and smooth (w/o using extra cement) complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces of walls finished even and smooth without using extra cement, complete all as specified and directed.

M&L 05 mm thick rendering on ceiling / soffits of slabs in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for Complete removal of existing treatment from walls, fins, chajja etc shall include brooming down or steel wire brushing, scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots and removing debris to low lying area outside of MoD land and applying a coat of 3 mm thick wall care water proof putty on scrapped/uneven surfaces to match with the existing surfaces before application of primer/distemper and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old treated plastered surfaces of ceiling and applying one coat of oil bound distemper on ceiling complete all as specified and directed.

S&F Aluminium anodized frame fo doors, windows, ventilators powder coating (Min. thickness of powder coating 50 micron) with one or more rebated including jointing cleats for fixing etc complete all as specified.

Supplying and fixing for 12 mm thick Toughened Glass frameless doors upto 2.10 M height including all as per required arrangement & proper machine edge finish in angle & fixed in the flooring side with Aluminium 'U' channel. Glass panels to be formed as per approved modules 12 mm thick clear toughened glass edge polished and accurate designed holes to be installed by means of steel fittings of an approved make. Including Floor spring, Lock approved make, Door Handle both side(SS as per approved make), all works including labour, wastages, cost of scaffolding, finishing with frosted design film etc. complete all as specified and directed.

S&F 50mmx50mmx2 mm thick stainless steel, Grade 304 for angles at corner edging complete all as specified and directed.

S&F powder coated (Min. thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type / sliding type without sash bars, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber packing, anodised aluminum snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1nos). hinges type B-21 100mm long (2nos) suitable handle (1nos) complete all as specified and directed by Engineer-in-Charge.

S&F Aluminum anodized door shutters, aluminum section weighing 0.55 Kg/m including necessary, jointing cleats, glazing clip, rubber neoprene packing handles two nos in each door, hinges three nos in each leaf, anodized snap beading screws etc powder coating of any colour (Thickness of powder coating not less than 50 micron) complete all as specified and as directed.

Supply and fixing 5 mm thick ordinary quality sheet glass in panels of aluminium door and window etc fixed with aluminium clip and rubber beading all as specified, n exc 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fixing 5mm thick ordinary quality sheet glass in panels of aluminium door and window etc fixed with aluminium clip and rubber beading all as specified exc 0.5 Sqm complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Material and labour for 12mm thick Prelaminated particle board, prelaminated both side with decorative choice laminations, fixed with screws to timber frame work complete all as specified and directed.

Supply and fixing in opening complete solid PVC door frame of size 50mm x 47mm made out of 5mm one side prelaminated any colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick(Style) consisting of frame made out of M.S tube for top & bottom rails. MS frame shall be covered with heat moulded prelaminated decorative any colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated colour PVC sheet for top rail, Lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of both side prelaminated decorative colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement fixing in frame at site, complete as specified and directed.

S & F 100mm butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and directed.

S&F 200mm aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

Supply and fixing for 125 mm aluminum handles cast type anodized complete all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) any thickness, including cover fillets and grid frame work, complete all as specified and directed by Engineer-in-Charge.

M&L for anodised aluminium snap grid frame work of size 605 x605mm for false ceiling including hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long, complete all as specified and directed by Engineer-in-Charge.

M&L for 8 mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid, complete all as specified and directed.

M&L for hollow core, 8 mm thick, wood grain shade or as approved by Engineer in charge/GE, first class heavy duty prelaminated PVC Wall panels lining/panelling and in ceilings inclusive of solvent cement and fixing at site on PVC frame or aluminium snap grid work as per specifications and drawing complete all as specified and directed by Engineer-in-Charge.

Taking down of old existing roof treatment of any description including removal of loose concrete, brick tiles, mud phuska, plaster, bitumen, oil grases and any other materials that might effect adhesion by wire brushing the surface and cleaning of the surface throughly with water and disposed off old materials from site complete all as specified and directed.

M&L for 50 mm thick plain cement concrete 1:2:4 type B-0 ( using 12.5 mm graded stone aggregate) as in padding/ base on roof complete all as specified and directed.

M&L for 20 mm thick plastering in cement mortar (1:4) on RCC roof slab, finish even and smooth for receive water proofing APP membrane including mixing of WPC @ 3% by weight of cement, complete all as specified and directed. Note : WPC shall be measured and paid separately.

Supply only Integral water proofing compound, complete all as specified and directed.

M&L for preparation of plastered roof surfaces and S&F APP polymeric water proofing membrane of minimum 3 mm thickness and weighing not less than 3.6 kg / Sqm , black finished reinforced with non-woven ployster 160 gsm matt with a thermofusible finish laid over primer conforming to IS:3384-1965 @ 0.5 kg/Sqm and thereafter apply hot blown bitumen 85/25 @ 1.20 kg/Sqm, tourching overlaps with a propane or a butane gas torch with a overlap of 75 mm at the sides and 100 mm at the end sealing including testing complete all as specified and directed by Engr-in-Charge.

S&F in replacement of 500 litres capacity, tripple layer, rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position including S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms), complete all as specified and directed.

S&F in replacement of 1000 litres capacity, tripple layer, rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position including S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms), complete all as specified and directed.

M&L for Hard core of gauge n exc 63mm thick of broken boulder spread leveling watering ramming to true surface complete all as specified and directed..

M&L for Sand filling under floors including watering and consolidation complete all as specfied and directed by Engr-in-Charge.

M&L for 60 mm thick precast cement concrete coloured interlocking tiles of grade M-35 any shape and size confirming to IS 15658-2006 with grey cement and pigment in floors / pavements over 30 mm thick sand cushioning, complete all as specified and directed. Note:- Sand cushioning shall be measured and paid separately.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing coat) removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.

M&L for Fully vitrified Ceramic tiles, dark shade, 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in cement mortar (1:6), complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate ) for sub base, complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate laid in panels as in plinth protection, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 100 mm thick Plain Cement concrete type B-1, 1:2:4 (Using 20mm graded stone aggregate) laid in panels as in pavement finished even and fair complete all as specified and directed.

M&L for Non-skid, coloured, ceramic, dark tiles, 7-8 mm thick, area of each tiles exceeding 0.11 Sqm but not exc 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removing to store complete all as specified and directed.

Supplying and laying of CPVC pipes of 20 mm dia., SDR 11 and plain CPVC SDR 11 fittings in walls/trenches, complete all as specified and directed.

S&F in repair of vitreous China squatting pan, 'Orissa' pattern, size 580 x440 mm white, with integral foot rests including provision of cement concrete bedding, complete all as specified and directed.

S&F PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed.

Supply and fixing 15 mm dia., brass, CP, central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed including connections complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fixing for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints, laid in trenches or in floors complete all as specified and as directed.

S&F 15mm bore bib taps, chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F stop valves, 15mm dia chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

Supply and fixing of polythene connection of low density polyethylene (LDPE) pipes of pressure rating 2.5 Kgf/Sqcm, 45cm long with and including two brass union couplings, heavy duty, suitable for 15mm bore pipe, one on each end for connecting polyethylene pipe to GI pipe and fixed, complete all as specified and directed.

S&F brass chromium plated Tubular towel rail 20mm dia D type, 60 cm long between flanges complete all as specified and directed .

S&F Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard ,and railing 60 cm long complete all as specified and directed.

S&F coloured (as approved by Engineer in Charge) composite pattern vitreous china wash down water closet pan (pedestal pattern, twin flush system including soft close seat cover), complete all as specified and directed by Engineer-in-Charge.

S&F fancy coloured wash hand basin, pedestal, size 630x510x180mm complete all as erected by manufacturers instruction shade as approved by GE, including 32 mm dia CP waste fitting and PVC pipe of required length, complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed.

Supply and fixing in repair 15 mm bore brass CP central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

Supply and fixing in repair 15 mm bore brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

Supply and fixing in repair 15 mm bore chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.

Supply and fixing in repair 15 mm bore chromium plated Stop angle valves, cast copper alloy screwed pressure, with crutch of butterfly handle,long shank and cup, screwed both ends for iron pipe for unions and fixed complete all as specified and directed.

Supply and fixing in repair Brass chromium plated shower rose of 125mm size complete all as specified and directed.

Supply and fixing in repair brass chromium plated tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed.

S&F in repair Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard ,and railing 60 cm long complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white including connection to drain or out going pipe etc including making good the floor complete including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and as directed.

Supply and fixing in repair Vitreous China wash basin, white, flat back, size 550x400mm , including cutting for and pinning in ends of brackets , including 32 mm dia CP waste waste fitting and PVC waste pipe of required length complete all as spcified and directed.

M&L for providing PVDF aluminium composite panels with fire resistant mineral filled core material as in interior/exterior wall cladding upto G+2 storeyed external wall surface shall consist of following (I) Aluminium sheet making a total panel thickness of 3 mm with outer surface finished with PVDF based coating 0.25mm, inner surface finished with a thin coat of polyster paint. The thickness of aluminium cover sheet shall be 0.50 mm inner core shall be of LDPE (II) MS tube framing of section 25 mmx50 mm x1.50 mm thick , (III) MS grid shall not be exceed 1.0 Sqm each the MS grid not more than 1 m c/c shall be fixed with MS angle 30x30x5 mm projected 150mm from surface of wall, (IV) Colour shall be approved by GE. (V) Joint shall be sealed with silicon weater proof sealing compound with help of masking Tapes. Note: Canopy, borders, projections etc will be measured in Sqm for payment purpose.

M&L for 3D stainless steel, LED lighted letters or print with 3 M retro reflective tapes on ACP Sheet above 12 inch complete all as specified and directed Note: Size shall be approved by GE.

Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for taking credit to be measured separetly including making good the disturbed portion/surface, complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated and (FRLS) unsheathed size 1.5 Sqmm with PVC concealed Conduit ( dia not less than 25 mm) with fixing accessories for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl. contineous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly all as specified and directed by Engineer-in-Charge.

All as per item No 101 above but for one 3/5 pin socket 5 Amp on same board, with 1.5Sqmm wire.

All as per item No 101 above but for one 3/5 pin socket 5 Amp on independent board with 2.5 Sqmm wire.

All as per item No 101 above but for 3 pins socket outlet 15 Amps independent with 4.0 sq mm including continous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sq mm.

S&F Modular switch, flush type, 5/6 Amps, single pole, one module, white colour, 230 Volts , AC complete all as specified and directed by Engr-in-Charge.

S&F Modular switch, flush type, 15/16 Amps, single pole, one module, white colour, 230 Volts, AC complete all as specified and directed by Engr-in-Charge.

S&F Modular socket, 3 pins combined, 5/6 Amp, flush type (multi purpose) two module, 230 Volts, AC complete all as specified and directed by Engr-in-Charge.

S&F Modular socket, 5 /6 pins combined, 15A/16 Amp, flush type(multi purpose) two module 230 Volts, AC complete all as specified and directed by Engr-in-Charge.

S&F Modular white cover plate with frame suitable for 03 module way 230 Volts , AC complete all as specified and directed by Engr-in-Charge.

S&F Modular white cover plate with frame suitable for 04 module way 230 Volts , AC complete all as specified and directed by Engr-in-Charge.

S&F Modular white cover plate with frame suitable for 06 module way 230 Volts , AC complete all as specified and directed by Engr-in-Charge.

S&F Modular white cover plate with frame suitable for 08 module way 230 Volts , AC complete all as specified and directed by Engr-in-Charge.

S&F Modular metal flush box suitable for 03 module way 230 Volts , AC complete all as specified and directed by Engr-in-Charge.

S&F Modular metal flush box suitable for 04 module way 230 Volts , AC complete all as specified and directed by Engr-in-Charge.

S&F Modular metal flush box suitable for 06 module way 230 Volts , AC complete all as specified and directed by Engr-in-Charge.

S&F Modular metal flush box suitable for 08 module way 230 Volts , AC complete all as specified and directed by Engr-in-Charge.

S&F modular stepped type electronic fan regulator flush type, 2-way, 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S&F Ding Dong door bell 230 Volts , AC complete all as specified and directed by Engr-in-Charge.

S&F Modular Bell push, flush type, 5 Amps, single pole, one way, 230 Volts , AC complete all as specified and directed by Engr-in-Charge.

S&F ceiling rose, PVC / Polycarbonate isolated body, surface backlite, 65x50mm, three terminals, 230 Volts, AC complete all as specified and directed by Engr-in-Charge

S&F Batten holder PVC/Polycarbonate base / back suitable for LED lamp. 230 Volts , AC complete all as specified and directed by Engr-in-Charge

S&F LED Bulbs 9/10W B-22 Pin type 230 Volts , AC complete all as specified and directed by Engr-in-Charge

S&F in replacement of single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole 20 amps MCB complete all as specified and directed by Engr-in-Charge

S&F in replacement of LED tube light fittings 20W (4 feet) wall mounted LED batten extruded PVC heat sink provided for efficient heat dissipation & integrated electronic driver optics diffused complete including electrical connection with copper cable from ceiling rose to fittings complete all as specified and directed by Engr-in-Charge

S&F in replacement of LED 6000K (2’ feet), 10W Decorative LED lighting fixture with extruded PVC . heat sink, environmental friendly, energy efficient ready to use pack, complete and including taking down existing fittings all as directed by Engineer-in-Charge.

S&F in replacement of Skylite recess mounting,36W, LED 2'x2' luminaire integrated electronic driver, optics diffused, complete including electrical connection with copper cable from ceiling rose to fittings all as specified & directed by Engineer in charge .

S&F in replacement of LED building secuity light 35 watt made up of pressure die cast aluminium housing with mid power LED as lightening source and PC cover having top opening inbuilt LED driver with IP66 protection and impact resistance of IK-07 complete including GI bracket with nut bolts, washers etc including electrical connection with copper cable from ceiling rose to fittings complete all as specified and directed by Engr-in-Charge

Supply and fixing ceiling fans complete with blades, down rods with accessories, 230 V, 1400 mm sweep, Minimum air delivery 245 CFM with service value 6.00 BEE, 05 star rated with brushless direct current motor (BLDC), complete all as specified and directed by Engineer-in-Charge.

S & F exhaust fans made of PVC plastic body complete with louver shutter of size 300 mm sweep, 1200 RPM, 230 Volt , AC, 50 Hz complete all as specified and directed by Engr-in-charge.

M&L for submain wiring with 2X4.0 SqmM+1 X 4.0SqmM Earth Wire single core PVC insulated FRLSH sheathed copper cable connecting to common earth dolly in and including heavy duty PVC concealed Conduit medium grade not less than 25mm dia and dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed. NOTE :- 3 runs of 4 Sqmm cable and one run of PVC conduit pipe will be measured as one running meter.

M&L for submain wiring with 2X10.0 SqmM+1X6.0SqmM Earth Wire single core PVC insulated FRLSH sheathed copper cable connecting to common earth dolly in and including heavy duty PVC concealed Conduit medium grade not less than 25mm dia and dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed. NOTE :- 02 runs of 10 Sqmm cable, 01 run of 6 Sqmm cable and 01 run of PVC conduit pipe will be measured as one running meter.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed.

S&F in repairs VTPN 4 way double door prewired distribution board TPN-DPX 125 MCCB including one No MCCB 100 Amps, 25 kA, 4 pole as incomer and suitable SPN/TP MCBs as outgoing double door type sheet metal enclosure 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable for 4 way complete and including taking down VTPN DB's all as specified and all as directed by Engineer-in-Charge. Note : Rates of MCCB and MCB SPN/SP/TP shall deemed to be included in the quoted rates.

S&F of single pole and neutral sheet metal enclosures for Distribution board (DB's)suitable for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail 240 V, 50 Hz supply double door SP&N DB system 12 ways complete all as specified and directed by Engr-in-charge.

S&F MCB SPN 40-63 Amps 240V including all termnials, fitting etccomplete all as specified and directed by Engr-in-charge.

S&F MCB SP 06 to 40 Amps 240V incl all termnials, fitting etc complete all as specified and directed by Engr-in-charge.

M&L in replacement of earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion, complete all as specified and directed.

Supply and install hi wall split units (2.0 ton) indoor and outdoor unit complete ( inverter type ) with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 2.0 ton complete all as specified and directed by Engineer-in-Charge.

Supply & fix Voltage stabilizer for automatic operation single phase naturally air colled indoor type & designed for input variation between 170 volts to 250 volts with output voltage stabilized at 230 with accuracy of +-2.5% and capacity 5 KVA, complete all as specified and directed.

S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole 20 amps MCB complete all as specified and directed by Engineer-in-Charge.

S&F copper tubing outer dia ( 1/2" and 1/4") suitable for 1.5/2.0 TR AC including nitril rubber thermal insulation capacity complete all as specified and directed by Engineer-in-Charge.

M&L for stand ( wall mounted type & Floor mounted type ) of suitable for split type AC complete all as specified and directed by Engineer-in-Charge.

M& L for 15 mm dia PVC drain pipe complete all as specified and directed by Engineer-in-Charge.

M&L for sand cushoning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable to trenches complete all as specified and directed by Engineer-in-Charge.

M&L for sub class `B` bricks for cable protection all as specified and directed by Engineer-in-Charge.

Supply and laying, connecting and testing XLPE underground cable insulated, and overall sheathed with aluminium conductor heavy duty 1100 volts grade 25 Sqmm 4 core laid in trenches/ on poles/ road crossing or passing through existing/new pipe under road crossing, clamping on wall etc, complete all as specified and directed. Note: (i) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highways and Aluminium thimbles/lugs are incl in the quoted rates. (ii) All equipments , machinery or tools if required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion, complete all as specified and directed.

Supply and laying GI pipe 'medium grade' size 25 mm dia with all fittings like socket of any type, elbow, bend, union, short piece, long screw, flange, cutting & welding as required site, complete all as specified and directed by Engineer-in-Charge.

S&F 25 mm dia. Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

Material and labour for Cutting GI Pipe line of size 50 mm to provide new connection by inserting GI TEE of 50/25 mm including necessary lead joints ,Excavation, returning, filling in of excavated material and including GI fittingss complete all as specified and directed by Engineer-in-Charge.

laxmi enterprises (BID ID -3345204)

NAVEEN KUMAR TYAGI (BID ID -3334673)

airstack india (BID ID -3346145)