Establishment of Cell Culture Room in KS 350 in CRI at ACTREC

Amount

Dismantling

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling and frameworks etc including disposal of unserviceable material and stacking of serviceable material with in campus and waste material outside ACTREC as directed by Engineer-in-charge.

Dismantling of doors, windows, clerestory window and SS Sink shutters (steel or wood) of all sizes with all accessories and material including sill including stacking outside campus.

Removing and discarding of existing PVC floor including scrubbing and removal of adhesive all as per the instruction of Engineer incharge.

Room finishing

Internal Plaster : 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) as per the instruction of Engineer incharge.

Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry 100 mm/ 125 mm thick with Grade-I AAC blocks of density 551 to 650 kg/ cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.

Providing and applying 2 coats of PU paint not less than 120 microns on each coat with primer as specified by the manufacturer. Cost of primer is also included all as per the instruction of Engineer in charge.

Providing and applying 3mm to 4 mm thick Self Levelling Epoxy Flooring System which consist of surface preparation, By Grinding the surface , minor repairs if any, applying 1coat of Epoxy Primer ,laying Self Levelling Epoxy Screed followed by Top Coat of Self Levelling Epoxy Coat as per manufacturer specification , work inclusive of existing flooring repairing and wall crack filling Complete job as directed by EIC.

VETRIFIED DADO TILES Providing & laying polished vitrified floor tiles in different (from size suggest EIC) sizes (thickness to be specified by manufacturer but not less than 6mm) with water resistant less than 0.08% and confirming to IS 15622 of approved make in all colours & shades, laid on 20mm thick cement mortar 1:3 ( 1 cement : 3 coarse sand) including grouting the joints with white cement and matching pigments etc. complete as per the instruction of Engineer incharge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. :25 mm nominal dia Pipes

Providing and fixing brass ball valve with all fixtures as per the instruction of Engineer incharge. - 25mm dia

S.S. SINK: - Providing and fixing in position Stainless Steel sink of approved make resting over cuddapah and granite support with waste coupling including fabricating bracket from 'B' class GI pipe with necessary welding, chiselling in wall and fixing the sink in position with waste coupling, bottle trap all complete as per the specified and directed by engineer-in charge. Providing and fixing of pillar cock and all the pipeline connection to nearest water and drainage point including taps and angle cock.

GRANITE: Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen/ toilet platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels of colour black/red/grey etc. The rate also includes removal and dismantling of old granite and including supply and installation of cudappah support.

Providing and fixing fixed float glass of size 6mm with aluminium framing as per the requirment and instruction of Engineer incharge.

Providing and fixing Sun control film thickness 0.5 mm

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge including removal of MS or wooden frame as applicable.

Supply and installation of 46 mm thick Emergency doors made with fire retardant paint having fire protective certification for 120mintues for door along with suitable infill to resist temperature upto 600-700 degree , alongwith 1.2 mm thick GPSP powder coated door frames, hardware like SS push plate, SS 'D' handle on both sides, SS ball bearing butt hinges, Stainless steel push plates on push side. - SS 304 ( With Engraving ), Double glazed view panel of std.size , Std.arm door closure for active leaf, concealed flush bolt for double door and provision for automatic bottom drop seal, Stainless Steel kick plates SS 304 etc. Item includes cost of supply and installation of all accessories and fixtures as mentioned above excluding door interlock and door access control and should be clean room compliant fixtures.Alongwith provision of toughened Vision glass/View Panel with 30mm thick border and silicon sealant if required flushed with door and Automatic door bottom seal. Includes provision of door frame

Supply and installation of Double skin modular wall panels made of 0.8mm thick GI powder coated sheets on both sides with PUF of density 40±2kg/m³ as infill, GI profiles for reinforcement along the periphery, floor track suitable to accommodate the epoxy floor flush with wall panel. Joint shall be sealed with cleanroom compatible silicon sealant. The Thickness of Panel shall 80mm with Riser Panel arrangement (Including Prefilter, Damper & Riser Grill - all clean room compliant) wherever required as per the instruction of Engineer In charge and as per approved drawing. The panels should certified for use in clean room facility with 60 minutes fire resistance certification. Including providing and fixing of PVC conduit 32 mm in the wall panels and Factory made cut-outs concealed in wall panel for Electrical sockets, switch boards, MGs, etc. Including provision of Vision Glass Panel made from 6mm thick Toughened Glass completely sealed with appropriate sealant for the size in the drawing and completely integrated to the wall panels as perthe drawings and instruction from Engineer incharge.

Electrical

Lighting circuits

SITC of Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable including surface/ recessed medium class PVC conduit Heavy(HMS) as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire from main distribution board to power point circuits and lighting switchboard.

SITC Secondary point wiring light to light looping with 2 x 1.5sqmm + 1 x 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed including medium class PVC conduit Heavy(HMS) / casing capping , with modular switch, modular plate, suitable GI box for concealled , suitable PVC box for surface , ceiling fan rose , PVC junction box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. ( Average circuit length 10 Mtr )

SITC of Wiring for Primary point wiring for light point with 2 x 1.5sqmm + 1 x 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed including medium class PVC conduit Heavy(HMS) / casing capping , with 2way modular switch, modular plate, suitable GI box for concealled , suitable PVC box for surface , ceiling fan rose , PVC junction box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

LED lighting , Agency to supply all led lights as approved by EIC ES , and of premium range and reputed make.

Supply ,Installation,Testing & Commisioning of LED shaped 15watt to 18 Watt Premium Range Recessed Downlighter having die cast aluminum housing with in built driver - Dimmable - as per the make approved by engineer incharge and architect.The material should be of premium range of products with reputed make and should have relevant electrical certification. Lumens more than 100Lumens/watt pressure die-cast aluminimum housing with white front bottom frame suitable to following features. LED fixture to be fixed surface or concealed as per site requirement. - Luminaires suitable to Aluminium metal grid ceiling or Gypsum or POP, -Minimum System Lumen output 1800 lumens -In built electronic LED pre wired driver, -Luminaire shall be with special translucent --High Surge Protection:-2.5kV. -High diffuser>85%, -Provision of Spring loaded Mounting clips. -Opal Translucent cover/Poly Carbonate reflector. -CRI>80,THD<10%. -High Efficacy gretaer than or equal to 100 lm/watt, -Provide Uniform low glare lighting non yellowing/PMMA lens for better light distribution, -Operatable voltage - 220-240 V,50 Hz, PF>0.9, -Colour Temperature gretaer than or equal to 4500K to 5500K

Power points and wirings

Supplying and fixing following size/ modules, PVC / GI box alongwith modular base & cover plate for modular switches in recess / surface etc. as required. • All the power socket tagging to be provided , PVC tags to be provided. civil work required for conceled installation of power sockets , electrical conduicts etc. is in the scope of agency including complete finishing and final painting • All the power sockets inside and power panel inside wiring ferruling to be done as instructed by EIC ES

3 Module

6 Module

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Modular switch 6A/16A

Modular Socket 6A/16A

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable including surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire FOR POWER POINTS rate is for one circuit per meter ( i.e 2 X 4 sq. mm + 1 X 4 sq. mm earth wire)

Data and Telephone

SITC of CAT 6 LAN cable for DATA including 25mm PVC Conduit Supply ,Installation,Testing & Commisioning of of UTP 23 AWG 4 pair CAT 6 LAN Cable to TIA/ EIA 568 B.2.1.in the surface/ recessed steel/ PVC conduit as required. RJ 45 connector to be fix at all end of cables

SITC of Cat 6 type I/O with RJ 45 socket with Box, faceplate and fixing screws, having the compliance/certifications for ISO 9001:2015 & ROHS

SITC of decorative type BLDC Ceiling fan 1200MM Sweep including all fixing accessories , fastners and accessories

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Removing and refixing of existing all Lighting fixtures, wirings , switch sockets casing cappings , conduict pipes , IO RJ 45 sockets , fire devices , etc as directed by EIC ES

Removing and refixing of existing, Exsisting switch, sockets etc. fire alarm devices, PA system devices, IT network devices, as directed by EIC ES

Access control Access control system RFID Card + Finger print + password , attendance +door access system SITC of Biometric fingerprint based time and attendance + door access control system with RFID technology, power supply adaptor , and have following Special Feature:, INOUT attendance records, Push Data Technology Users: 3000 Fingerprints Card Capacity: 3,000 Transactions: 1,00,000 Communication: RS485, TCP/IP, USB , as per instructions & as directed by O-I-C, ES. SITC of inside Fingerprint for Time Attendance and Access Control (Inside door access control finger print reader ) SITC of emergency exit switch Push button type ( installed inside door) SITC of double door or single door electromagnetic lock as per site requirement ZL bracket used for Electromagnetic lock support Supply of Access proximity cards Qty 50 Nos for each machine Agency has to provide software for time and attendance management. All internal electrical wiring , LAN wiring from machine to electromagnet and emegrncy exit switch in the scope of agency.

SITC of UV Light 40 watt including fixture for culture room

SITC of desk telephoone instrument panasonic, analgoue callerID type as approved by EIC ES

Removing and re-fixing of existing split ac

Copper pipes with insulation GC cloth and drain pipe of quality approved by EIC. The rate of RMT will be inclusing alll the items as composite.

Supply, Installation, Testing and Commissioning of chilled water Fan Coil Unit(Cassette Type/ Hi Wall/ Fan Coil Unit- Ceiling) complete with G.I. casing, with Side/bottom return Air Plenum (5mm PE insulation) or as per site requirement For Hi Wall Units the Casing has to be as per OEM(ABS casing) , Filter box with 8mm Nylon Filter, 3 Row Deep cooling coil with coper tube diameter is 9.52 mm and thickness 0.33 mm with hydrophilic Aluminium fins. Complete coil must be designed for standard working pressure is 1.6 MPa(16bar) and the test pressure is 3.3MPa(33bar). Unit to be provided with SS drain pan with 7mm PE insulation and +200 mm extended. Direct driven fan (three speed) motor, operated on 230 volts, single phase, 50Hz, AC supply. Unit to be provided with Wireless remote. It shall also have RS485 Modbus communication function for BMS control. ESP for the Fan Coil Unit be 80 Pa Minimum( In case of 3 Tr, 4 Tr and 5 Tr) or Else Specified. Units need to BIS/Euro vent Certified. The Cut outs to be made in ceiling as per the Machine for the Servicing purpose/Trap Door should be included in the price.The unit included with Infrared Remote Control,micro-controller, drain pump & necessary supporting arrangement with ready made Valve Station complete with butterfly Valves / Gate valves , 2 way Valves with Actuators–Strainer,Pressure cum balancing valves. The entire skid shall be coated with Zinc-chromate primer coating and then painted with enamel paint. Price should be included for Electrical cable connection from MCB/Isolator to Cassette unit shall be done by HVAC contractor. Pipe line require from the main header also to be considered. no additional cost given for the same. Minimum Capacity should be as follows:

Each Unit to be provided with Cordless Remote with Temperature display. It has to based on microprocessor operations which can realize intelligent control of room temperature. It shall also have RS485 Modbus communication function or BACnet for BMS control. (Preferably in round shape)

2 TR (800CFM) Decorative Hi wall unit

Portable HEPA air purifier of the following specifications. Households in India air purifiers ON had avg PM2.5 levels <55 µg/m³ in Q4'22^. The only air purifier with 350° oscillation and Air Multiplier TM technology Vacuum sealed HEPA filter captures pollutants, bacteria and viruses. Auto senses and displays - PM2.5, PM10, VOCs, NO2 - in real-time on Link Application, enabled with voice control. Whole-Room purification tested in 81 m³ room. Includes H13 Combination Filter with Remote Control Vacuum Sealed 360° Glass HEPA Filter & Tris-coated