Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.4 CrAccepted-AOC NIL | ₹2.4 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹2.6 Cr+₹11.4 L (4.65%)Rejected-Finance HIMACHAL PRADESH | ₹2.6 Cr+₹11.4 L (4.65%) | L2 | Rejected-Finance Non-Responsive due to L2 Bidder |
| 3 | L3₹2.9 Cr+₹42.8 L (17.5%)Rejected-Finance | ₹2.9 Cr+₹42.8 L (17.5%) | L3 | Rejected-Finance Non-Responsive due to L3 Bidder |
| 4 | L4₹3.2 Cr+₹77.0 L (31.5%)Rejected-Finance | ₹3.2 Cr+₹77.0 L (31.5%) | L4 | Rejected-Finance Non-Responsive due to L4 Bidder |
Tender Value
₹3.4 Cr
EMD Value
₹6.7 L
Closing Date
13 Jan 2022, 11:00 amClosed
Executive Engineer HP.PWD. Division Nalagarh
Executive Engineer HP.PWD. Division Nalagarh
.
2021_PWD_55089_1
NABARD-10850-54 dated 20.12.2021
Open Tender
Civil Works
Item Rate
540 days
NALAGARH
Please refer Tender documents.
9 documents required · 9 mandatory
₹5,000
₹6.7 L
5 Apr 2022
27 Dec 2021
13 Jan 2022
27 Dec 2021
13 Jan 2022
27 Dec 2021
Amount
Excavation in hilly area in all heights and depths and in all kind of soil by mannual/mechanical means including saturated soil comprising of ordinary soil,soft rock,hard rock chiselling,wedging out of rock(where blasting is prohibited) and their intermediate classification of soil setting out true to the required lines, grades, width camber and super elevation levels cutting and trimming of side slopes and level as shown in the drawing and as directed by Engineer-in-Charge at site according to the MORD technical specification clause 302,1603 and 1603.2 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of road and transporation of unuseful material for filling in road ways camber,embankments for grade improvements and disposal of all material to required width of the road or on approved dumping site through all modes of transporation including head load or animal transport or mechanical means alongwith its levelling fine dressing and carriage of machineries ,materials, tools,equipments and safety measures and incidentials necessary to complete the work by mechanical means and labour, recovery of stone to the tune of 50.25 cum at the rate of Rs. 170/- (Rupees one hundred seventy) per cubic metre shall be effected from the bills for the quantity actually measured or nil cubic metre which ever is more. Any loss to the public private property during the course of execution shall be the absolute respensibility of the contractor which shall have to be compensated by him in all cases.
Construction of embankment with approved materials deposited at site from road way cutting and excavation from drain and foundation of all other structure or other sources graded and compacted in 150mm(one hundred fifty millimetre) thickness with three wheel static Roller l 80-100(eighty hundred) Kilo Netwon static weight road roller to meet requirementof table 300.1 and 300.2 as per MORD technical speficiations clause 301.5 and as per the entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads and lifts and other incidential . The rate including octroi, royality, Malkana toll tax ,GST and other taxes imposed by the Goverment.
Construction of sub grade and earthen shoulder with approved materials obtained from borrow pits, with in all leads and lifts, transporting to site, spearding grading to required slope and compacted to meet requirement of table 300.2 as per M.O.R.D. technical specifications Clause 303.1 including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Earth work in excavation for all type of road structure such as Retaining Structure , culverts, parapets,side drain excetra in all type of classification of soil comprising of ordinary soil,ordinary rock,hard rock, by mechanical / mannual means chiselling/wedging out rocks(where blasting is prohibited) as per drawings and MORD technical specification clause 305.1 and as per direction of the Engineer-in-charge including setting out,construction of shorting and bracing,removal of stumps and other deletrious materials and disposal of materials upto any lead and and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material including shorting and strutting and pumping and bailing out water(surface and sub soil water) upto any depth any quantam of water including cleaning of slush which may arise out during dewatering as per direction of Engineer-in-charge including carriage of materials within all leads and lifts and other incidentials.
Providing and laying mechanically mixed and vibrated plain cement concrete in foundation for all type of structure complete of plain concrete nominal mix 1:4:8 (one cement isto four sand is to eight graded stone agreegate 25 mm (Twenty Five millimetre) nominal size) in or under water and curing complete and including pumping or bailing out water,dewatering,removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths including the cost of form work complete in all respect as per drawing and technical specification clause 802.803,1202-1203 and as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.R/wall
CD Work
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8and as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Providing weephole in brick masonry / stone masonry / plain reinforced concrete abutment, wing wall, return wall with 100mm dia PVC pipe extending through the full width of the structures with slop of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614,709,1204.3.7 and as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and technical specifications Clause 1301and as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain/reinforced concrete in open foundation for all type of structure complete of plain cement concrete grade M-10 (M-ten) nominal mix 1:3:6 ( one cement: three sand: six graded crushed stone aggregate 40mm (forty millimetre) nominal size in or binder water and curing complete including pumping or bailing out water,dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths excluding the cost of form work as per drawing and MORD technical specification clause-802,803,1202 and 1203 as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government. Slab Culvert
V shape Drain
Plain/ reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 1202, and 1203 P.C.C grade M 15 Nominal mix (1:2.5:5) i one cement: ttwo and half sand: Five graded crushed stone aggregate 20mm (ftwenty millimetre) nominal size ncluding carriage of materials within all leads and including incidentials lifts and as per the directions of Engineer-in-charge.he rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and Technical Specification Clauses 802, 803, 1202 and 1203. Plain Cement concrete grade M20 Nominal mix 1:2:4.Nominal mix and curing complete including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Providing and laying reinforced cement concrete in superstructure complete as per drawings and Technical Specification Clauses 800, 1205.4 and 1205.5 Reinforced Cement Concrete Grade M25 (1:1.5:3) Nominal mix and curing complete including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government. Slab Culvert
Drain
Providing and laying cement concrete wearing course M30 grade including reinforcement complete as per drawings and Technical Specification Clauses 800, 1206.3 and curing complete including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government. Slab Culvert
Drain Cover
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and Technical Specification Clauses 802, 803, 1202 and 1203. Plain Cement concrete grade M20 Nominal mix 1:2:4.and curing complete including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Providing and laying 900mm dia reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection work, back filling, concrete and masonary work in head walls and parapets Clause 1106. including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Construction of Gravel /Soil aggregate base/sub base Nominal Maximum size Grading 80mm as per table 2.3 of IRC SP 77-2008 spreading in uniform layers with Tractor mount appropriate grading arrangements on prepared surface, mixing by mix place method at OMC with Tractor mount appropriate rotavator attachment and compaction with three wheel 80-100kN static Roller capacity to achieve the desired density, complete as per Specification contained in Para 2.2, 3.6 and 3.7 of IRC SP 77-2008ncluding hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406.ncluding hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502.including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Providing and laying 50 mm thick bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504.including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Providing and laying 25 mm thick semi dense bituminous concrete with 40-60 TPH batch type HMP producing an average output of 50 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ minimum 5.0 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORD specification clause No. 508 complete in all respect.including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.(Nothing extra shall be paid for higher contants of bitumen as per job mix formula)
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501.including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm M-40 Grade of Concrete make NTC as per IS:15658 as per drawings and Technical Specification Clause 1504.including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Reinforced cement concrete mechanicallly mixedand vibrated, M-15 grade nominal mix 1: 2 ½ : 5 ( one cement : two & half sand : five graded crushed stone aggregate 20mm nominal size, kilometre stone/ local stone of standard design as per IRC : 8 Fixing in position including painting and printing etcetera as per drawing and M.O.R.D. technical specification rural roads Clause 1703 (One kilometre stone, precast).
Reinforced cement concrete mechanicallly mixed and vibrated, M-15 grade, nominal mix 1: 2 ½ : 5 ( one cement : two & half sand : five graded crushed stone aggregate 20mm ( twenty millimetre) nominal size, in kilometre stone/ local stone of standard design as per IRC : 8 Fixing in position including painting and printing etcetera as per drawing and M.O.R.D. technical specification rural roads Clause 1703 [ 200 metres ( two hundred metres) stone, precast]. including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Reinforced cement concrete M15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704 (Boundary Pillars)including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government. (900x900x900 mm Triangular)
Providing and erecting direction and place identification retro-\reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government. Direction and Place Identification signs with size 600x450mm
Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.(600 mm dia Circular)
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Providing & fixing Road Cat Eyes complete as per drawing and technical specification clause 805 of MORDSpecifications 2013 and direction of the Engineer.including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Road Markers/Road Stud with Lens Reflector Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Provision of 15 No.s rumble strips covered with premix bituminous carpet, 15-20mm high at center, 250mm wide placed at 1m centre to centre at approved locations to control speed, marked with white strips of road making paint. Taking ouput 100 sqm (including gaps).including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Providing and casting Parapet with PCC M-10 For Nominal Mix 1:3:6 (40mm size agg.) as per drawing & technical specifications clauses 800 and 1208.4 including exavation in earthen work 15cm deep as per design specifications complete. (The parapet to be constructed on R/wall edge wall and toe walls of CDs to be measured and paid for separately.and curing complete including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.
Routine maintenance after complition of construction work as per terms and condition of bid document that is 4 of contract data to general condition of contract and technical specifications of Ministry of Rural Development for rural roads August 2004 ( Two thousand Four ) for rural , including hauling / carriage of all labour equipments and materials to various locations through all modes of transporations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-charge
For 1st Year
For 2nd Year
For 3rd Year
For 4 th Year
For 5th Year
RAVINDER KUMAR
RAJESH KUMAR GOVT CONTRACTOR
Jai Singh Kashyap
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .