Proposed Extension of Office and Conference Hall at RDC and SDO Residence Present C.M. House at Mayers Road Ranchi

Amount

Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I.

Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume)

Providing coarse clean sand in filling in foundation trenches or in plinth including thick with all leads and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted voume)

Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing designation 75 B brick work in C.M (1:6) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10 mm thick mortar joints cost of screening materials , scaffolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

providing Tor steel reinforcement of dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL)

8 mm dia

10 mm dia

12- 16 mm dia

Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is not supplied by the deptt.)

Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Coupler 110 mm

Bend 110 mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm

Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : (A) 3 mm thick

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. 11.21.1 In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) 11.21.1.1 Acid and alkali resistant tile

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge .In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. Using R4 series with frame (115mm & above) x (45mm & above) & both glazed and fly screen sash (44mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height above 1.8m)

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. Using R2 series with frame (65mm & above) x (40mm & above) & glazed sash (25mm & above) x (50mm & above) & fly screen sash (18mm & above) x (40mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 meter)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm

Carraige of Material

Bricks

Stone Chips

Stone Metal

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm

Sanitary and Water Supply Works

Providing and fixing C.P extension nipple for15 mm size with 12" BSP threads, 75 mm length and 30mm breadth weighing not less than 18 gms

Providing and fixing PTMT grating of approved quality and colour. 125 mm nominal dia with 25 mm waste hole

Providing and fixing unplasticised P.V.C. connection pipe 15 mm nominal bore with 45 cm length

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

15 mm nominal dia Pipes

20 mm nominal dia Pipes

25 mm nominal dia Pipes

32 mm nominal dia Pipes

40 mm nominal dia Pipes

Making holes in walls for laying G.I pipes and restoring the same after pipe laying as per specification and direction of E/l.

(a) 125 mm thick wall.

(b) 250 mm thick wall.

Providing and fixing G.M. non return valve Horizontal type of approved quality as per specification and direction of E/l. Horizontal non return 32 mm dia weight not less than 600 gm

Providing and fixing G.M. non return valve Vertical type of approved quality as per specification and direction of E/l. Vertical non return 32 mm dia weight not less than 600 gm

Supplying materials and labours for construction inspection chamber of designation class 75 B bricks size 750 mm deep, 600 x 450 internal dimension having 250 mm wall thickness in cement mortar ( 1:6 ) including 12 mm cement plaster ( 1:4 ) with punning on inside and cement plaster (1:6 ) with 600 x 475 mm G.I. cover with frame (Weight not less than 36 Kg.) in foundation and refilling all complete as per specification and direction of E/l.

Poryrnene water storage tank of mark covei and suitable locking system system in double layer confirming to IS: 12701-1996 with latest version

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Point wiring in PVC conduit with modular type switch:- Wiring for light point /fan point /exhaust fan point /call point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with modular type switch ,modular plate, suitable size G.I. box etc.as required. Group C

Twin control point wiring in PVC conduit with modular type switch:- Wiring for twin control light point witch 1.5sq.mm FR PVC insulated copper conductor single core in surface/recessed PVC CONDUIT, 2 way modular, type switch, modular plate, suitable size G.I. box etc .as riquied.

power plug wiring in PVC conduit(2x4sq.mm):-wiringfor light power with 2x4 sq mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit along with 1 Nos. 4 sq. mm FR PVC insulated copper conductor singl core cable for loop earthing as requied.

Circuit/submain wiring in PVC conduit:- Wiring for circuit/submain wiring along with earth with following sizeg PVCinsulated copper conductor,single core cable in surface/recessed PVC conduit as requied.

2x1.5sq mm+ 1x1.5sq mm earth wire

2x2.5sq.mm+1x2.5sq.mm earth wire

2x6.0sq.mm+1x6.0sq.mm earth wire

2x4.0sq.mm+1x4.0sq.mm earth wire

S/F modular & cover plate :- supplying and fixing following modular base & cover plate on existing modular matal boxes etc . As required .

6 module

8/9 module

12 module

S/F Modular type switch/socket:- Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including modular plate us required.

5/6amps,one way switch

5/6 amps,two way switch

S/F rewireable double pole/ TP &N switch discoonector:- providing and fixing following capacity pole/ TP& N sheet matel switch disconnector fuse unit in existing matal board with rewireable taype fuses. Including drilling holes in matale board, making connections, etc as required.

63 amps, TP&N

100 amps, TP&N

S/F TPN RCCB:- supplying and fixing following rating,TO&N (three phase and neutral)415 volts,residual current circuit breaker (RCCB),having a sensitivity current upto300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc.as required.

S/F 'B' series, S.P. MCB:-Supplying and fixing 6amps to 32ampsrating,240 volts,'B' series,miniature circuut breaker suitable for lighting and other loads for following poles in the existing MCB DB complete with connections,testing and commissioning etc.asrequied.

6/32amps,single pole, ''B'' series

S/F DP MCB isolator:- Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connection,testing and commissioning etc.as requied.

S/F ceiling rose- Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection, etc as required

G.I. Earth pipe eletrode with salt/charcoal:-Erthing with G.I erth pipe 4.5 mtr long,40mm dia inculuding accessories,and providing masonare enclosure with cover plate having locking arrangment and watering pipe etc.with charcoal and salt as required.

S/F panel mounted changover:- providing and fixing following capacity 4 pole panel mounted changecover switches in existing cubicle panel board, making connection,earthing the body etc.as required. 63amps,4 pole

S/F s.p. MCB DB:supplying and fixing following way three pole neutral heet,MCBdistribution board,415volts,on surface/recess,completewith tinned copper busbar,neutral busbar,earth bar,din bar, detachable gland late,interconnection,phosphatized and powder painted including earthing etc asrequierd.(But without MCB/RCCB/lsolator) 6way(4+18),Double door,Horizontal type

S/F DP MCB isolator:- Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connection,testing and commissioning etc.as requied.

Non scheduled S/F/F wall panelling 19 mm thick water proof ply (Green Plywood, green panel ISI mark, termites) 4 mm thick water proof Vaneer (green décor Wood) finishing with melamime polished all complete including all taxes royalty all complete as per specifications and direction of E/I (Rate sanctioned by Cheif Engineer Office)

S/F/F wall panelling 19 mm thick water proof ply (Green Plywood, green panel ISI mark, termites) 1 mm thick water proof Vaneer (green décor Wood) finishing with melamime polished all complete including all taxes royalty all complete as per specifications and direction of E/I (Rate sanctioned by Cheif Engineer Office)

Providing and fixing Sehuco AWS/ ADS 50 Ni Fixed door with conceled door closer along with all hardware and locks, 6 mm thick clear DGU glass with mess pieated all complete jon D

Providing and fixing Sehuco AWS 40 Ni Fixed door with conceled door closer along with all hardware and locks, 6 mm thick clear DGU glass with mess pleated all complete jon D

Providing and fixing high quality roller Blindali with all material and labour all complete job

Providing and fixing HD silent motor for roller blind all complete job

Providing TL 16 Remote for roller Blind all compelte job

Providing and fixing Nilaya Sabyasachi (german make) moist proof premium wall paper with all material and labour all complete job

S/F/F Statuario Italian Marble Block with all material and labour all complete job

S/F/F of fire retardant, waterproof antifungal, termite proof green Aoure Premium GP 017 WPC Board for panelling with aluminium section with all material and labour all complete job

S/F/F of 12 mm thick louver charcoal panel for weall clading complete job

Providing and fixing 3 star invertor split AC 243 V veetra eite copper condensor 2 Ton Voltas make with all material and labour all complete job

Providing and fixing 2 ton V guard AC stabalizer with all material and labour all complete job

Providing and fixing Havells (220 V- 240 V) 150 mm Ventilair DX Exhaust Fan with all material and labour all complete job

Providing and fixingLED Zoom light 2 X LSW warm white jaguar make (model IRL- WHT- LZOMN-LR215xW) with all material and labour all complete job

S/F/F Led Eris 12 W NN Black finishing body of jagaur make(IRL- LLK- LERBGS0125N) all complete job as per specification and direction of E/I

Providing and Fixing 1 Lt Aluminium globe shape with copper body Jaguar make (DPN- COP- SLPEA089AE27) all complete job as per specification and direction of E/I

Providing and Fixing 1 Lt Fabric shade with wood , alloy zinc of Jaguar make (DDFL- WNG- FL1092FB) all complete job as per specification and direction of E/I

S/F/F vintage bricks natural clay roof tiles all complete job as per specification and direction of E/I

Providing and applying Smartcare damp Proof Ultra Ultimate waterproofing over roof all complete job as per specification and direction of E/I

Providing and fixing jaguar Ariarimless back wall hung ( ARS- WHT- 39955P180UFSM) all complete job as per specification and direction of E/I

Providing and fixing jaguar(JDS- WHT- 25909) thin rim table top basin all complete job as per specification and direction of E/I

Providing and fixing soap dispenser push bottom jaguar make all complete job as per specification and direction of E/I

Providing and fixing (JCS-WHt-2400WS) Single piece slim concelled Cistern with wall mounted frame all complete job as per specification and direction of E/I

Providing and fixing Cistern control plate (JCP- CHR- 352415) all complete job as per specification and direction of E/I

Providing and fixing jaguar toilet roll holder with flop (AQN- 7753) all complete job as per specification and direction of E/I

Providing and fixing jaguar toilet towel ring round (AQN- 7721) all complete job as per specification and direction of E/I

Providing and fixing two may bib cock with wall flange (AL1- 85041) all complete job as per specification and direction of E/I

Providing and fixing jaguar brass health faucet silver chrome finish all complete job as per specification and direction of E/I

Providing and fixing jaguar sink mixture extended spout table top mounted model (CQT- 233218) all complete job as per specification and direction of E/I

Providing and fixingAngular stop cock with wall flange (Orp- 10053PM) all complete job as per specification and direction of E/I

Supply of Polivinyl Chloride AntiShid waterproof mesh entrance PVC door mat size (4'-0 X2 '-0") all complete job as per specification and direction of E/I

Providing and fixing jaguar Elena ABS water storage Water heater 15 L2.KW white and Blue all complete job as per specification and direction of E/I

Providing and fixing jaguar Italian Marble top Dining table ,SS pvd metal coating stainless steel frame with 4 nos Chair )model- GRJNSTL/5557444/62900)

Adler make side table with Shelves and drawers (Model- SBBEETLE 3060)

Providing & Fixing 20 mm thick RubberTifes for Flooring all Material and Labour all complete job.

Providing & Fixing 55x9OK 55" Sony T.V. with all Fittings all complete job.

Ptoviding & Fixing Dolby Atmos HT-G700 Sony music system with all complete job.

Providink Wall mounted T,V. Braket all complete job.

Providing & Fixing Terrace Awning double side coated fabric with all Material and Labour all compiete job.

Providing Fixing and fixing Havells Stealth Slient Fan all Material and Labour allcomplete job.

Providing Fixing and fixing 8mm thick modigaurd glass mirror (6'0"-4'0") all Material and Labour all complete job.

S/F/F fully casted balcony railinR all complete job.

S/F/E ROt iron spiral 5tairs,hbricated precast chequered plate.pipe pillar with fancy twisted stalr railing all Materia and Labour all complete job.

Canst. of connectingt bridge made of precast chequred Plate and Beam etc. all complete Job.

S/F/FAlumunium chequred sheet to ¢over the precast chequred Plate all Material and Labour all complete job.

S/F/F S.S railing 304 grade 165 mg 4 Line and tap handle rail stud system ail Material and Labour all complete job.

Providing Fixing and fixing led zoum light 2xlSW warm white jaguar make (model IRL-WHT-LZOMN-LR215xW) all mterial and Labour all complete job.

S/F/F LED Focus light black body 20W neutral white of jaguar make (JUI-BLK-LFCLB1 RO2OXN)all complete job as per specification and direction of E/l.

S/F/F LED Eris 12W NN black finishing body of jaguar make (IRL-LLK-LERSBGSO125N) all compjete job as per specification and direction of E/l.

Providing Fixing and fixlng Voltage Stablizer 1.5 KVA voltage converter autocut off voltage range 1nput 170V to 270V Output 100V to 13OV all complete job as per specification and direction of E/I.

Mecto Basketball movable poIe (30mm) 6"dia round pipe with fibre acrylic board ringret 3.2 mtr extension complete protective frame cushion all complete job as per specification and direction of E/I.

JERAL-CARDIO SERIES:TREADMILL RACELINE, DISPLAY 9" LCD-BLUE BACKLIT DISPLAY FEEDBACK-TIME, SPEED,INCLINE, . HEART RATE. DISTANCE CALQRIES/PROGRAM-TARGET,ROLLING, VALLEY, FAT BURN, RAMP, STRENGTH, INTERVAL,FITNESS, TEST, 4HRC/MOTOR-41P/6HP PEAK/SPEED-0.5-22KM/11/INCLINE 15% (15 LEVELS)/MOTOR CONTROL AC INVERTER/RUNNING AREA-22" X 62/BELT-2.5T (2PLY)/DECK THICKNESS-25 MM SHOCK ABSORPTION/QUICK CONTROL/IPOD & MP3 (AUXILIARY JACK) CHARGER (1PAD/IPOD)/SPEAKERS/FAN/CONTACT HR/WATER BOTTLE HOLDER READING RACK/ONE TOUCH SPEED ONE TOUCH INCLINE/WORKOUT TRACKING OVERALL DIMENSIQNS (L/W/H)-85" X 36" X 62"/USER WEIGHT-180 KGS/396 LBS.

ELLIPTICAL CROSS TRAINER-E7 DISPLAY-6 LED+8X32 DOT-MATRIX/D1SPLAY FEEDBACK-TIME,SPEED, INCLINE, HEART RATE, DISTANCE, CALORIES/PROGRAM-TARGET. ROLLING, VALLEY, FAT BURN, RAMP, STRENGTH,INTERVAL RANDOM, FITNESS TEST, 4HRC HEART RATE FEEDBACK CONTACT AND TELEMETRIC HR SENSORS/POWER REQUIREMENT- SELF POWERED/STRIDE- 20"/ RESISTANCE RANGE-25 LEVELS/FLYWHEEL-10 KGS/22 LBS/HAND PULSE/HR RECEIVER/RESISTANCE LEVEL CONTROL/MAX USER WEIGHT-182 KGS/400 LBS. OVERALL DIMENSIONS (LXWXH)-8O"X26"X71

SPINNING BEKK-BSS PLYWHEEL 20 KGS-44 LBS/FRAME-STTEL/HANDLE BAR POST- STEEL VERTICAL & HORIZQNTAL ADjUSTMENT/SEAT POST-STEEL, VERTICAL & HORIZONTAL ADJUSTMENT DRIVE SYSTEM -BELT (PQLY-VI/RESISTANCE SYSTEM-FRICTION BRAKE PAD RESISTANCE LEVE1- MULTI CONTROL HANDLE BAR-STANDARD HANDLE BAR PEDAL-STANDARD PEDAL/BOTTLE HOLDER MAX USER WERHT- 150 KGS/330 LBS/ OVERALL DiMENSIONS (LXWXH)-

JERAI HOME GYM SERIES- MULTIGYM WITH SEATED LEG CURL/EXTENSIQN.COMBO.JJUNGZI.A) PEC FLY/REAR DELT-165 LBS. B) LAT PULL DOWN-165 LBS SEATED LEG CURL/EXTENSION COMBO-165 LBS D H1GH LOW PULLEY-165 LBS

JERAL-LOAD ON SERIES 45" LEG PRESS [JPL 129]

JERAL- BENCHES & RACKS SERIES POWER BENCH [JBR 132]

DELUXE SUPER DENCH [JBR 111]

VERTICAL DUMBLE RACK [JBR 135]

DIMOND CUT DOUMBLE [JDDK] 2.5X2/5X2/7.5X2/10X2/12.5X2/15X2/17.5X2/2OX2/25X2)

COLURED BUMPER PLATES [JA 031]-5X2

COLURED BUMPER PLATES [JA 031]-10X2

COLURED BUMPER PLATES [JA 031]-15X2

COLURED BUMPER PLATES [JA 031]-20X2

OLYMPIC BARS [JOB] (7"X1/4"X1)

OLYMPIC EZ BARS [JEZB](4"x1)

Add 18 % GST

Add 1% Labour Cess

Sutanu Kumar

Bidder Name

Ms Gokul Construction