COMPREHENSIVE MAINT OF CERTAIN E/M REPAIR WORKS AND OTHER MISC WORKS AT TECHNICAL DOMESTIC SMQ AND OMQ AREA AT AF STN BHISIANA

Amount

Taking down carefully copper/ aluminium point wiring (light fan socket or power) complete along with fittings such as switches, ceiling roses, Pendants regulators Tube fittings and other Kits & fittings/conduit from surface /wall. Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface / location. (Note:- Serviceable fitting / fixtures will be reused in the work, complete all as specified and directed by Engineer in charge.

Taking down un-serviceable main switch, DB’s insulators, DB for MCB etc of any type and any capacity and further disposal including making good the disturbed surface and matching the colour of wall with the existing colour wash/ paint/ distemper wherever required (as per the existing), complete all as specified and directed by Engineer in charge.

M&L for point wiring with FRLS PVC insulated unsheathed multi-stranded copper conductor 1.5 Sq.mm (nominal area) single core cable 1100 Volt grade drawn in and including rigid non metallic concealed PVC Conduit of suitable size (not less than 20 mm) on wall, surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes (Terminal boxes) with earth dolly, duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLS PVC insulated unsheathed stranded copper conductor 1.5 Sq.mm (nominal area ) single core cable as earth continuity conductor to common earth and connected to earth dolly, complete all as specified and directed by Engineer in charge for the following Items:-

(a) One light/fan point controlled by one 1-way switch.

(b) One light point controlled by two 2-way switch.

(c) One 3/5 pin socket outlet, 5 Amp on independent board.

(d) One 3/5 pin socket outlet, 5 Amp on same board.

(e) One bell /buzzer point controlled by one push button on independent board.

M&L for point wiring with FRLS PVC insulated unsheathed multi-stranded copper conductor 4.0 Sq.mm (nominal area) single core cable 1100 Volt grade drawn in and including rigid non metallic concealed PVC Conduit on wall, surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes (Terminal boxes) with earth dolly, duly galvanised, with white shade frame & cover plate of suitable module for modular switch/ or sockets including FRLS PVC insulated unsheathed stranded copper conductor 4.0 Sq.mm (nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly, complete all as specified and directed by Engineer in charge.(For AC and Geyser)

M&L for point wiring with FRLS PVC insulated unsheathed multi-stranded copper conductor 2.5 Sq.mm (nominal area) single core cable 1100 Volt grade drawn in and including rigid non metallic concealed PVC Conduit on wall , surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes (Terminal boxes) with earth dolly, duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLS PVC insulated unsheathed stranded copper conductor 2.5 Sq.mm (nominal area ) single core cable as earth continuity conductor to common earth and connected to earth dolly, complete all as specified and directed by Engineer in charge.

M&L in replacement of switch piano flush type single pole one way 6 Amp.

M&L in replacement of switch piano flush type single pole one way 15 Amp.

M&L in replacement of socket outlet piano flush type 2 in One 3 pin 05 Amp.

M&L in replacement of socket outlet piano flush type 3 pin 15 Amp.

M&L in replacement of switch flush type bell push 06 Amp.

S&F in replacement of modular white cover plate with frame, 1/2 module.

S&F in replacement of modular white cover plate with frame, 3/4 module.

S&F in replacement of modular white cover plate with frame, 6 module.

S&F in replacement of modular white cover plate with frame, 8 module.

S&F in replacement of metal flush boxes 1,2 module.

S&F in replacement of metal flush boxes 3,4 module.

S&F in replacement of metal flush boxes 6 module.

S&F in replacement of metal flush boxes 8 module.

M&L in replacement of modular switch one way 06 Amp, 1 module.

M&L in replacement of modular switch one way 16 Amp, 1 module with indicator.

M&L in replacement of modular bell push switch 06 Amp 1 module.

M&L in replacement of modular bell push socket 06 Amp 2/3 pin combined, 2 module.

M&L in replacement of modular socket 16 Amp 06 pin 2 module.

S&F in replacement of modular fan step regulator.

S&F in replacement of fan step regulator electronic type.

S&F in replacement of bell buzzer AC 230 V single pole.

S&F in replacement of bell Ding Dong AC 230 V single pole.

S&F in replacement of lamp holder, PVC- polycarbonate type and back plate suitable for batten fitting.

S&F in replacement of ceiling rose 65x17mm three terminals after dismantling old one.

M&L in replacement of sub main wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 2 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distemper all as directed at site, complete all as specified and directed by Engineer in charge. Note:- Two runs of 4 sqmm cable along with one run of 2 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length.

M&L in replacement of sub main wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 6 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 4 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distemper all as directed at site, complete all as specified and directed by Engineer in charge. Note:- Two runs of 6 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length.

S&F in repair MCB DB TPN 4 Way vertical type factory made IP 43 protection class metal double door with Shrouded Neutral Bar & Pan assembly with connecting link complete including one MCCB upto 125A after dismantling old one, complete all as specified and directed by Engineer in charge.

S&F in repair MCB DB SPN 8 Way factory made IP 43 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc, complete all as specified and directed by Engineer in charge.

S&F in repair MCB DB SPN 4 Way factory made IP 43 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc, complete all as specified and directed by Engineer in charge.

S&F in replacement of MCCB 125 Amp 4 pole 16 Ka for fixing in DB, complete all as specified and directed by Engineer in charge.

S&F in replacement of MCCB 63/100 4 pole Amp 16 Ka for fixing in DB, complete all as specified and directed by Engineer in charge.

S&F MCBs 240/415 Volts 10 KA finger proof terminal, B curve bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB, complete all as specified and directed by Engineer in charge. (DB will be measured and paid separately under respective items of sch A)

(I) MCB C curve SPN 40 to 63 Amps.

(II) MCB B curve SP 40 Amp.

(III) MCB SP 6 to 32 Amp

M&L for Collecting Fans from Store yard of AGE E/M, ceiling /exhaust/wall mounted fans of any size and any make/model, moving to reputed workshop as directed by GE/Engineer-in-charge, dismantling the same, cutting and removing the old defective/burnt out winding, cleaning the core of the fan motor, re-winding the fan motor by using machine with supper enamelled copper winding wire and using insulating materials, varnishing the assembly and re-assembling the fan including testing etc, complete all as specified and directed by Engineer in charge. NOTE:- All defective/ unserviceable parts/items other than winding wire, varnish ,insulating material, bearings, capacitors, and flexible wires shall be measured separately and paid for under respective item of this schedule.

All as per item No.38 here-in-before but for ceiling fans of 1400 mm sweep any type

All as per item No.38 here-in-before but for ceiling fans of 1200 mm sweep any type

All as per item No.38 here-in-before but for exhaust fans of 230/300 mm sweep any type complete all as specified and directed by Engineer in charge.

All as per item No.38 here-in-before but for exhaust fans of 400/450 mm sweep any type complete all as specified and directed by Engineer in charge.

All as per item No.38 here-in-before but for wall mounted fans of upto size 400/450 mm sweep complete all as specified and directed by Engineer in charge.

S&F of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed by Engineer in charge.

S&F of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed by Engineer in charge.

S&F in replacement of Capacitor 2.5 mfd, complete all as specified and directed by Engineer in charge.

M&L for Collecting Fans from Store yard of AGE E/M, ceiling /exhaust/ wall mounted fans of any size and any make/model, moving to reputed workshop as directed by GE/Engineer-in-charge , dismantling the same, cutting and removing the old defective/burnt out winding, complete all as specified and directed by Engineer in charge.

S&F in repair Capacitor 4 mfd fixed in replacement, complete all as specified and directed by Engineer in charge.

S&F in repair Ceiling fan blades (Set of three blades) suitable for 1200/1400 mm sweep ceiling fan duly painted with synthetic enamelled paint fixed in replacement, complete all as specified and directed by Engineer in charge.

S&F in repair Exhaust fan blades (Set of three blades) suitable for 400/450 mm sweep duly painted with synthetic enamelled paint fixed in replacement, complete all as specified and directed by Engineer in charge.

S&F in repair Exhaust fan blades (Set of three blades) suitable for 230/300 mm sweep duly painted with synthetic enamelled paint fixed in replacement, complete all as specified and directed by Engineer in charge.

S&F in repair MS clamps for ceiling fans complete with rubber real of any size/make/sweep/model fixed in replacement, complete all as specified and directed by Engineer in charge.

M&L in repair suitable size of bolts, nuts,body screws, GM bushes and safety pin/split pins for any type/size/make and model of extg fan as required, fixed in replacement, complete all as specified and directed by Engineer in charge.

M&L in repair Shaft for any type/size/make and model of fans as required fixed in replacement, complete all as specified and directed by Engineer in charge.

M&L for Painting of ceiling fans complete,in suit with synthetic enamel paints by spraying including filling cavities with filliers, one coat after cleaning all dust etc, complete all as specified and directed by Engineer in charge.

S&F in repair Ball bearing of ceiling fans of any sweep/size/make/model fixed in replacement, complete all as specified and directed by Engineer in charge.

S&F in repair Ball bearing of Exhaust fans of any sweep/size/make/model fixed in replacement, complete all as specified and directed by Engineer in charge.

S&F in repair Upper and lower canopy complete with adjusting screws as required, fixed in replacement, complete all as specified and directed by Engineer in charge.

S&F in repair Down rod 20 mm dia, GI tubing medium grade 45 cm to 60 cm long as require fixed in replacement at site, complete all as specified and directed by Engineer in charge.

S&F in repair Louvers made of GI Sheet, suitable for 450 mm sweep exhaust fans fixed in replacement, complete all as specified and directed by Engineer in charge.

S&F in repair Louvers made of GI Sheet, suitable for 230/300 mm sweep exhaust fans fixed in replacement, complete all as specified and directed by Engineer in charge.

S&F in replacement of rigid non metallic PVC conduit medium grade 20 mm external dia ISI marked with accessories such as tees, bends,junctin boxes bell mouth tube ends including fixing accessories, locks as couplers lock nuts pipe hooks ets concealed in wallsceiling etc, complete all as specified and directed by Engineer in charge.

S&F in replacement of wall mounting slim 18/20 Watt 4 feet led Batten luminaire , white with engineering plastic batten with white acrylic cover sleek design & high efficiency for wall and surface mounted applications, complete all as specified and directed by Engineer in charge.

S&F in replacement of wall mounting LED slim 9/10 Watt 2 feet, white with high efficient LEDs & glare free opal diffuser, complete all as specified and directed by Engineer in charge.

S& F LED fitting bulkhead 10 Watt single phase 50 Hz IP 65 outdoor type, complete all as specified and directed by Engineer in charge.

Supply only ISI marked self adhesive PVC electrical insulation Tape roll of 25 mm wide,0.125 mm thick and 25 RM length, complete all as specified and directed by Engineer in charge.

S&F of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, complete all as specified and directed by Engineer in charge.

S&F of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, complete all as specified and directed by Engineer in charge.

S&F in replacement wall mounted fan plastic body 240 V single phase 50 Hz 450 mm sweep, complete all as specified and directed by Engineer in charge.

S&F in replacement environment friendly recess/surface mounting LED flat panel 2'x2', cool white with high efficient LEDs & glare free opal diffuser (36 W) PF>0.95 driver life >25000 Hours, operating range 140v to 280 V including all accessories, complete all as specified and directed by Engineer in charge.

S&F of 3 phase 4 wire AC Static Energy meter of Accuracy Class 1.0, 3 X 240V, 50Hz, with Backlit LCD Display, of rating 10-60A (Measures & Displays kWh,V,I,kW,PF,Hz,Last month history of kWh & MD in kW) with special features like Display in absence of Power with Transparent Hinge type Box, complete all as specified and directed by Engineer in charge.

S&F of single phase AC Static Energy meter of Accuracy Class 1.0, 240V, 50Hz, with Backlit LCD Display of rating 5-30A & with 1 push button. (Measures & displays kWh,kVAh, V,I,PF, frequency, kW, kVA, six months history of Energy & MD in kW & kVA) with transparent hinge box, complete all as specified and directed by Engineer in charge.

M&L in repair earthling complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc, complete all as specified and directed by Engineer in charge.

S&F Decorative wall light, gold finish fixture with white glass diffuser suitable for 7.5 W LED filament lamp E27 base including 1 N x 9 W LED Lamp .Havells Cat Part No. GOBLETO WL 2LS E27 GLD or equivalent, complete all as specified and directed by Engineer in charge.

S & F in repair Capacitor 3.15 mfd fixed in replacement complete all as specified and directed by Engineer-incharge.

Lathe work/machine work for fitting/housing of in bottom/top cover of fans of any size/ type/ model complete all as specified and directed.

M&L in replacement of sub main wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 4 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distemper all as directed at site Note : Two runs of 4 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length).

Taking out old unserviceable, broken, rusted name board of any type and size all as specified and Supply, Installation and Commissioning of LED Name board of MAIN RECEIVING STATION / AGE E/M SUB DIVISION or as specified by Engineer-in-Charge with engineers monogram of ACP sheet for board and background colour is blue and LED acrylic letters in white colour of 1.5 watt & LED driver of Hilite or equivalent make and size of board 15`x 4` (in arc shape with diameter as 15 Ft)including Material and labour for supports frame / clamp and back plate fabricated from MS square pipe of size 50x50mm for standing of board for leg purpose including nuts , bolts washers, welding bending cold or hot drilling holes for bolt in any shape of size as indicated or directed and inclusive of one primer coat , one under coat and one finishing of coat of paint complete all as specified and directed. Including cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping etc complete including point wiring with 1.5 sqmm FR PVC insulated cable multistranded coppper conductor drawn through & including ISI marked PVC conduits including 5 Amp switch & socket, box modular type all as specified and directed by Engineer-in-Charge.

Taking out old unserviceable, broken, rusted name board of any type and size all as specified and Supply, Installation and Commissioning of LED Name board of "5 MVA 66 / 11 KV GRID "or as specified by Engineer-in-Charge with engineers monogram of ACP sheet for board and background colour is blue and LED acrylic letters in white colour of 1.5 watt & LED driver of Hilite or equivalent make and size of board 20`x 4` (in arc shape with diameter as 20 Ft) including Material and labour for supports frame / clamp and back plate fabricated from MS square pipe of size 75x75mm for standing of board for leg purpose including nuts , bolts washers, welding bending cold or hot drilling holes for bolt in any shape of size as indicated or directed and inclusive of one primer coat , one under coat and one finishing of coat of paint complete all as specified and directed. Including cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping etc complete including point wiring with 1.5 sqmm FR PVC insulated cable multistranded copper conductor drawn through & including ISI marked PVC conduits including 5 Amp switch & socket, box modular type all as specified and directed by Engineer-in-Charge.

Supply and fix including taking down LED garden light fitting of min. 9 watt or higher in stainless steel housing with clear acrylic cover in top section with IP 43 protection including making suitable PCC foundation and all electrical connection complete all as directed by Engr-in-Charge. Cat Part No.OBL-GRY-LBLD05R601XW or equivalent

Supply and fix in replacement LED post top lantern with die cast aluminium spigot, spun aluminium, powder coated top cover acrylic diffuser IP 65 protection class of 25/30 watt fitted on the piller with the help of GI pipe/PCC work/nut bolts and connection with 2.5 sqmm 3 core copper cable including all fixing accessories complete all as specified and directed Engr-in-Charge. Cat part No. Jaguar OGL-GRY-LGTP04X028XW

Supply and fix in replacement LED wall washer light fitting of min. 8 watt having 4 way throw of light IP66 warm white all as specified and directed by Engineer-in-Charge Cat Part LHEVAEPBPN6KOO7 or equivalent as approved by Engineer-in-Charge.

Supply , laying , jointing and testing in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 10 Sq mm 4 Core with aluminium thimble of same size complete all as directed by Engineer-in-Charge

Excavation in trenches not exc. 1.5 m wide and not exceeding 1.5m depth for foundation of poles/laying of cables/stay/strut etc not exceeding 10 Sq m on plan and getting out in soft/loose soil.

Returning, filling including spreading, levelling watering and well ramming in layers not exceeding 25 cm as directed.

Removing excavated material (soil) n.exc 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point

M&L for river sand as in sand cushioning to under ground cable including punning down of thickness 180mm sand in layers as specified and as directed

M&L for brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm complete all as specified and directed

M&L for making bore below the road for crossing including GI pipe light grade 50 mm dia for cable protection and fill the putty on both sides of the GI pipe after crossing the armoured cable to avoid the water inside complete all as specified and directed by Engr-in-charge.

S&F PVC insulated Multi Stranded Copper Conductor Cable 1.5 Sqmm 3 Core, Round Flexible for connection of Street Light Fitting with Bus Bar and flexible conduit including taking down unserviceable Cable of any description, complete all as specified and as directed.

Supply and fixing in replacement AIO Solar Street Light 9 Watt made with High Efficiency Mono Crystalline Solar PV Module, Lithium Ferro Phosphate battery with in-built BMS technology, High Efficacy LED, MPPT Solar Charge Controller and Aluminium Extruded body & is specially progrmmed to automatically control the dimming and brightness of light, which increases the backup time complete with tubular Pole of height 4 mtr all as specified and directed by Engineer-in-charge. Crompton CAT Part No. CSADSPI09CDL or equivalent as approved by Engineer-in-Charge.

Supply and fixing in replacement LED street light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing along with prismatic polycarbonate modular secondary lens optics with IP 66 ingress protection 4KV in-built and 10 KV external surge protection with top opening driver cover for easy maintenance with efficacy not less than 120 lm/W heat resistant. The LED driver shall be of isolated type with Constant Current Constant Voltage topology to ensure optimum driving of LEDs. The LED streetlight shall have power factor more than 0.95. The optical compartment shall be covered with heat resistant toughened glass for safety. LED street light shall be of Integral type complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete all as specified and directed by Engineer-in-charge Bajaj Cat part No. ENXT P54L WH CR PC SD or equivalent all as approved by Engineer-in-Charge

do- all as per item No.39 but Reusing old bricks

Truly Technos LLP (BID ID -3373711)

Rasvinderpalandco (BID ID -3377205)

M/s Luxmi Constructions (BID ID -3381092)

SWARN SINGH AND CO. (BID ID -3385286)