REPAIR TO HARDSTANDING SCOOTER CYCLE SHED GARAGES MT STORES AND OTHER TRAINING AREAS OF AAD COLLEGE AND REPAIR MAINT TO DRAINAGE COMPOUND WALL SECURITY FENCING HARDSTANDING AND OTHER ALLIED WORKS IN ZONE A AREA AT GMS

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 m depth in soft /loose soil etc complete all as specified and directed

Demolition of Cement Concrete (unreinforced) of any description & in any position not otherwise specifically provided for. Complete all as specified & directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L Brick work using fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M& L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 20mm thick in cement mortar 1:4 on on stone masonary surface of walls, finished fair and even complete all as spcified and directed

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface, finishing even and smooth using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

M&L for add or deduct for each 25mm girth or part thereof over or under 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

M&L for surface dressing n exc 15 cm deep for soft/loose soil complete all as specified and directed.

M&L for Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil etc complete all as specified and directed

M&L for Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M&L for Removing excavated material exc 250m but n exc 500m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Demolition of RCC of any description and in any position not other wise specially provided for reinforcement cut as required to facilitate demolition complete all as specified and directed.

M&L for pre cast cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in cover slabs (for manholes etc) and similar articles with plain faces, set in CM 1:4 complete all as specified and directed.

M&L for Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base of floor complete all as specified and directed.

M&L for Exterior designer tiles 30cm x 30cm x 22 to 25mm thick as in floor set, jointed in neat cement slurry and pointed with grey cement and pigment over 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Mild Steel TMT bar 06mm to 08 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M&L for hard core of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:2:4 type B-1 using 20 mm gradedstone aggregate as in path/hard standing surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for forming contraction (Dummy) joints 100 mm x 10 mm wide filled with sealing compound Grade B complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in sub base,floor , plinth protection etc and finishing cement concrete even and smooth without using extra cement complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L Khandolite stone tile size not less than 18 mm thick and 300mm x 200mm and shall be fixed bedded laid & jointed in slurry over and including 15 mm thick bedding layer in CM 1:4 exposed surface on khandolite stone tiles shall machine cut & polished and complete all as specified and directed.

S&F machine pressed precast concrete interlocking paver block any shape & size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement & pigment. Complete all as specified & directed.

Dismantling posts or sturts (wood,steel or RCC) any section incl taking out embedded portion and making good disturbed ground etc complete all as specified and directed.

Dismantling fencing wire mess any type etc complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out returning, filling, in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm as in any typeof soil incl watering, and removal surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

M&L for PCC 1:3:6 Type C-2 using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed.

M&L for providing Precast cement concrete 1:2:4 type B1 in fencing posts boundary pillars, boulders (for stone walling), etc (of any section indicated) with plain fair faces, including chamfers weatherings, throating etc and setting in mortor complete with joints to match including necessary from work complete all as specified and directed.

S&F angle iron posts and rails,drilled and struts in fencing including cutting tops to shape as directed, driiling holes, notching for wire, etc, flat iron fillets (for secruing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Mild screw bolts (Machine made) with hexagonal or square head at one ends and to fitted with washers and one hexagonal or square n.exc 15cm long dia of neck 11 to 15mm complete all as specified and directed.

S&F of Galavinised 2 strand steel barbed wire 2.24 mm dia barbed wire with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing tying at crossing with and provision of galavanised mild steel wire staples pins etc as directed (each line wire to be measured) complete all as specified and directed.

Supply only PVC coated chain link of 3.16mm dia mild steel galvanised fencing of mesh size 100mmx100mm as per IS : 2721-1979 weight n exc 4.00 kg per sqm complete all as specified and directed.

Fixing only PVC coated chain link fencing including line wires, any mesh, size & type to any standards. Rails, straining bolts etc including provision of binding wire complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all as specified and directed.

S&F pre- painted galvatume aluminum zinc corrugated steel based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping serews complete all as specified and directed.

M&L for Fe 410-W (Gde E-250 quality A) Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed..

M&L for Fe 410-W (Gde E-250 quality A) Framed work as in doors or gates of angle or other section with gusset plates,rails,braces etc complete,drilled for fixing of steel sheeting or other covering. Doors,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening anf fixing complete all as specified and directed

Taking down cement plaster on brick or concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on brick or concrete surface, finishing even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed

M&L preparation of old painted surfaces of walls and applying one coat of cement based paint complete all as specified and directed.

M&L for preparation new plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed

M&L preparation of old painted surfaces of walls and applying one coat of white wash complete all as specified and directed.

M&L preparation of new or previously untreated steel surfaces of any description n exc 10cm in width or girth and priming with red oxide zinc chrome and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old painted steel surfaces of any description n exc 10cm in width or girth and priming with red oxide zinc chrome and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old painted steel surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for two coats synthetic enamelled paint to new steel surfaces after preparation over a coat of red oxide primer area over exc 10cm in width or girth etc complete all as specified and directed.

M&L for Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 150 mm internal dia of pipe complete all as specified and directed.

M&L for Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 200 mm internal dia of pipe complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.

M&L for salt glazed stoneware (SGSW) drain pipes laid in trenches of 150 mm internal diameter of pipe and jointed in CM 1:1 complete all as specified and directed.

M&L for salt glazed stoneware (SGSW) drain pipes laid in trenches of 200 mm internal diameter of pipe and jointed in CM 1:1 complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for salt glazed stone ware gully traps size 150 x 150mm, square or round mouthed, type ‘P’ including setting and jointing to drains with CM 1:1 including demolition of existing traps complete all as specified and directed. (Note: CI grating will be meaured separately).

S&F Cast iron work grade FG 150, n exc 5 kg each, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and directed.

S&F reinforced concrete pipes, class NP-2, laid and jointed complete with collars of 200mm dia as in repair complete all as specified and directed.

S&F for integral water proofing compound.

Taking down rain water pipe of any size or pattern incl all fitting head,shoe,band,swan neck etc complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius provided with access door complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.

S&F 110mm bore PVC (SWR) couplers complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) couplers complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F in repair PVC pipe 50 mm dia laid in floor/wall incl all fitting with joint sealed with pvc adhesive complete all as specified and directed.

S&F in repair 75mm PVC (SWR) floor trap, plain with grating,jointing with solvent cement as per site requrement complete all as specified and directed.

S&F PVC stack clamps to walls or roof for 75 mm bore of pipe etc complete all as specified and directed.

S&F PVC stack clamps to walls or roof for 100 mm bore of pipe etc complete all as specified and directed.

M&L for Cleaning and removing all scale and dirt, etc, from Rcc/Pvc tanks exc 250 ltr n.exc 500 ltr capacity incl washing of water tank with bleaching powder @ 0.25 Kgs per tank with writing the date of cleaning with any type of paint and from mouths of circulating pipes, including Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed..

M&L for Cleaning and removing all scale and dirt, etc, from Rcc/Pvc tanks exc 500 ltr n.exc 1000 ltr capacity incl washing of water tank with bleaching powder @ 0.25 Kgs per tank with writing the date of cleaning with any type of paint and from mouths of circulating pipes, including Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed..

M&L for removing of sludge from septic tanks including removal of sludge water manually or mechanically in all respect and removing the sludge to distance not exceeding 500 mtrs and burried in to the ground and making to a true surface and covering with loose soil and as directed (The rate included excavation and filling )

M&L for cutting and removing wild bushes/ vegetation, surface dressing around the septic tank/sock well/ manholes to a distance of 2 mtrs all around and depositing surplus spoil/ rubbish n.exc 50 m complete all as specified and directed.

M&L for cutting and removing wild bushes/ vegetation, etc at bldgs above the 2m height from GL and depositing surplus spoil/ rubbish exc 100M but n.exc 500 M complete all as specified and directed.

M&L for Cleaning of sewage line (length from manhole to manholes) of any dia by roding and flushing after cleaning and removing mud/sludge etc to a distance exc. 250m but n.exc 500m and spreading in low laying areas and covering with loose soil and complete all as specified and directed.

M&L for Cleaning of manholes and removing sludge from manholes of any size and depth and deposing the sludge and spreading in low laying areas and covering with loose soil and complete all as specified and directed.

M&L for Cleaning the blockage of floor trap, nahani trap, gully trap and first man hole and removing sludge from the site and depositing the sludge at low area etc complete all as specified and directed.

M&L for Dewatering of soak well by diesel driven pump & motar collecting the liquid in closed sewage tank and depositing the same to an isloted place at a distance n exc 5 km. (Note :- diesel/pump/motar and pipe/section and delivery and sewage tank arrange by contractor and the cost of the same shall be deemed incl in quoted rate) etc complete all as specified and directed. (Note : Max qty for one trip = 3KL)

M&L for TMT Bars 5 mm dia & over upto & including 10 mm dia in stirrups, spaces & binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.90mm dia or securing with clips. Complete all as specified & as directed.

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to Fe-410-W (Gde E-250) quality-A or Fe-290 (Gde-E-165). Complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down Galvanised steel barbed wire 2.24mm dia.complete all as specified and directed.

M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 cm high etc complete all as specified and directed. (Note : Rates to be deemed fit for all security measures while working in heights more than 6m from GL).

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Complete all as specified & directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1998 grade St-240. Complete all as specified & directed.

M&L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate in foundations, filling & mass concrete. Complete all as specified & directed.

M&L for forming construction joint 90 mm deep × 10 mm wide filled with grade 'A' sealing compound. Complete all as specified & directed.

M&L for forming construction joint 60 mm deep × 10 mm wide filled with grade 'A' sealing compound. Complete all as specified & directed.

ABC CONSTRUCTION COMPANY

A ONE ENGINEERING COMPANY

M/s Bapujee Builders and Traders

K R KAUSHAL AND SONS

Sai Ram Associates