PROVN OF ONE TOILET BLOCK WITH SIX TOILETS AND BATHROOMS EACH NEAR HRDC AT HQ BDE KLP UNDER GE ARMY BARMER

Amount

Earth work in excavation in any type of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge

M&L for PCC (1:4:8) type D-2 as in foundation filling or mass concrete

Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm

Earth filling in floors or pavings except sand , Sand filling under floors or in foundations including watering and consolidation including watering and consolidation

M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick & fair finished surface

M & L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide and fair finished surface.

M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.

M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions.

M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

M and L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M and L for TMT Mild steel bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M and L for RCC M-25 (using 20 mm graded stone aggregate) as Beams, cantilevers, bressummers, lintels over 1.5m span.

M and L for RCC M-25 (using 20 mm graded stone aggregate) as Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.

M and L for RCC M-25 (using 20 mm graded stone aggregate) as Columns, pillars, piers, posts and struts

M and L for RCC M-25 (using 20 mm graded stone aggregate) as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L for modular Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6

M&L Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 14

M&L for 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement) external plaster

M&L for 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement) internal plaster

M&L for cement plaster 5mm thick in CM 1:3 on ceiling etc finished even and smooth without using extra cement.

Preparation of newly plastered surfaces of wall and distempering two coat of oil bound distemper including preparation of wall surfacase with a layer of wall care putty over a coat of primer.

M&L preparation of newly plastered / un-plastered surfaces of wall and applying three coats of whitewash on ceiling complete all as specified & directed by Engineer-in-Charge.

M & L for Preparation of new plastered surfaces of wall and applying two coats of cement base paint .

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 mm thick, watered and rammed to a true surface

M&L for for 75 mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) laid in panels in plinth protection as required and finishing the surface of complete incl necessary form work all as specified and directed.

M& L 100 mm thick cement concrete 1:3:6 type C-2 (40 mm stone agg) as in sub base finishing cement concrete even amd smooth without using extra cement.

M&L 25 mm thick average Cement concrete type B-0,1:2:4 (12.5mm graded aggregate) as in floor

M&L non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick backing coat in CM 1:6 complete all as directed by Engineer-in-Charge.

M & L for coloured glazed cermic tiles size 300x450x7 mm thick on vertical surface of wall over and including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white cement/coloured cement to match the tiles and all as specified and directed by Engr-in-charge.

M&L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement) Note:- i) WPC shall be mixed where required and as directed. Ii) WPC shall be measured and paid separately as supply only.

S&F GI tubing medium grade including all fittings fixed to walls and ceilings or laid in floors as directed of following sizes :-(a) 15mm bore pipe

All as per Srl item no 31 above but 25 mm bore pipe

S&F in repair vitreous china squatting pan "Orissa' pattern size 580x440 mm & 'P' or 'S' type ,white with integral foot rest and all as specified and directed.

S&F for vitreous china wash down water closet pan / padestal pattern white with following accesseries and including taking down existing vitreous china wash down water closet pan: - (a) PVC seat cover with fixing bolts. (b) JET CP steel for EWC Spray.

S&F Vitreous China Urinal, Half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.

S&F 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level white with inlet, ball valve, float and handle including brackets, complete all as specified and direcetd by Engineer-in-Charge.

S&F vitreous China wash hand basin of size 550 x 400 mm oval type fixed in granite slab including cutting and moulding and making good surface including 32 mm dia brass chromium plated waste fittings, waste pipe and all as specified and directed by Engr-in-charge.

S&F bib tap, 15mm bore, chromium placed screwed down screwed for iron pipe or for brass ferrule complete.

S&F CP fancy type stop valves/Angle valves screwed down high pressure, with crutch butterfly handle screwed both ends for iron pipe or for unions and fixed to 15mm bore dia pipe. complete all as specified.

S &F chromium plated shower roses with or without swivel joints, 125mm in size including fixing to steel pipe or union complete all as specified and as directed.

S&F in repairs brass CP soap dish fancy type

S&F in repairs brass CP toilet paper holder fancy type

S&F PVC connections 15mm size with PTMT nuts of length 450mm

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D Type, 600 mm long between flanges including brackets complete all as specified and as directed by Engr-charge. Make: Cera/ Jaquar/ Hindware / Johnson or equivalent.

S&F in repair tubular towel ring brass chromium plated, 20mm dia, fixed with chromium plated brass screws complete all as specified and direcetd by Engineer-in-Charge. Make: Cera/ Jaquar/ Hindware / Johnson or equivalent.

S&F in health faucet with Nozzle 30" long PVC connection pipe and chromium plated brass sprey handle complete all as specified and as directed.

S&F 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed and all as specified & directed by Engr-in-charge.

S/F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hosisted and fixed in position.of capacity 1000 ltrs and all as specified and directed by Engr-in-charge.

S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls :- (a) 110 mm bore pipe

S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors :- (a) 110 mm bore pipe

All as per Srl item no 51 above but 75 mm bore pipe

S&F stack clamps out of 50mm x 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof (a) 110 mm bore pipe

S&F PVC (SWR) junction single, (Single T) equal or unequal with access door :- (a) 110 mm bore pipe

S&F PVC (SWR) bends any radius with door (a) 110 mm bore pipe

All as per Srl item no 55 above but 75 mm bore pipe

S&F PVC (SWR) vent cowl suitable for 110mm bore pipe

S&F 75 mm bore PVC (SWR) multi floor trap with grating including jointing with solvent cement.

S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F 105x60 mm single rebates pressed steel frame chowkat 1.25mm thick for doors with one rebates including necessary fixing lugs hinges lock strike plattes etc complete all as specified.

S&F 2ind class hard wood 35mm thick Factory made plain framed panelled shutter any number of panels of timber flate on both sides, with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces the size of rail and stile as per IS 1003 (Part-I) klin seasoned and chemically pressed treated.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing and all as specified and directed by Engr-in-Charge. Make : Rajshri or equivalent such as Sintex, Polycon etc

S&F solid PVC door frame of size 50 x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying nd fixing in opening as per specification & drawing.

S&F aluminium tower bolt 150mm long complete.

S&F aluminium handle 150mm long complete.

S&F butt hinge size 100mm extruded aluminium alloy with galvanized Mild steel hinges, pin andonised and fixed type.

S&F 250 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.

S&F Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed 150mm long

S&F 150 mm long Mild steel pressed handles, oval type, stove enamelled black

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete

S&F Steel windows or ventilators, fixed type, with glazing bars

S&F 3 mm thick sheet glass ordinary quality and glazing with oil patty in Square n.exc 0.50m Sqm in each pane

S&F 3mm thick figured glass pin headed type and glazing with oil putty insqure n.exc 0.50 each pan

M&L 18 to 20 mm thick granite stone slab machine cut bedded and jointed with grey cement slurry and pointed with white cement or coloured cement to match the colour of granite for WHB platform/window cills over 20mm thick screed bed in cement mortar (1:4) including grinding, polishing, rounding edge etc complete all as specified and direcetd by Engineer-in-Charge.

M&L applying 2 coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation

M&L preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified & directed by Engineer-in-charge.

S& F Grating square 150 mm size of PTMT (Minimum weight 100gms)

M&L for Damp proof course in cement concrete (1:2:4), type B-0 40 mm thick to horizontal or vertical surfaces including necessary formwork.

Supply only liquid waterproofing compound.

M&L for modular Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4.

M & L for cement concrete 1:2:4 type B1, 20mm graded stone aggregate as in surface channel and drains complete all as specified and directed.

M & L for extra forming fair finished drain or channel in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc.

S & F for 16mm dia mild steel round bars for handles of manhole cover and rungs of manhole.

S & F for precast reinforced cement concrete cover slab of manhole (casted in cement concrete type B1, 1:2:4 using 20mm graded aggregate) and set in cement mortar 1:6.

M & L for cement concrete bed 1:4:8 type D2 to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete.

S & F 150mm bore reinforced cement concrete pipes, class NP2 one end socketed laid in trenches, set and jointed in cement mortar 1:1.

Cutting into existing manholes for connecting new 150 mm internal dia drains pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified & directed by Engineer-in-charge.

M&L for point wiring in concealed with PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its acessories including necessary pressed steel terminal boxes and 3 mm thick ISI marked laminated sheet cover and SS screws with cup washers for fixing switches, sockets, fan regulators etc. including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 for one light /CB point controlled by one switch, complete all as specified and as directed.

All as per Srl item no 88 above but for one exhaust fan point controlled by one switch.

All as per Srl item no 88 above but for one socket outlet 3/2 pin, 5 Amp, point on the same board with other switches.

All as per Srl item no 88 above but with cable 4 sqmm including 4 sqmm cable as earth wire for 15/16 amp socket point.

Supply and fix switch piano flush type single pole one way 5 Amps complete all as specified and as directed

Supply and fix socket outlet 2in1, 3pin,5A complete all as specified and as directed.

Supply and fix socket outlet 2in1, 3pin,6/16 A complete all as specified and as directed.

Supply and fix switch piano flush type single pole one way 15 Amps complete all as specified and as directed.

Supply and fix ceiling rose surface bakelite 65x50 mm two to three terminals.

Supply and fixing 06 to 32 A rating 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single pole and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

All as per Srl item no 97 above but SPN 6 -32 Amps

S&F sheet metal enclosure, (for DB's when MCBs to be used), flushed in wall single pole and neutral Double door, 8 way, 240 Volts with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete including connecting with 3 core flexible copper conductor complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. and fixing on wall with toggle bolts and connecting with PVC flexible pipe complete all as specified and as directed. Note: PVC connection pipe, ground toggle bolts for fixing water heater will be measured and paid separately under relevant items.

Supply only ground toggle bolts (tower/anchor), 6" long along with washers and nuts for fixing geysers 25/50 ltrs capacity.

Supply only PVC connection 15 mm bore with PTMT nuts of length 600mm in repairs complete all as specified and as directed.

Supply only PVC metal braided connection pipes for hot water supply with brass adopters 600mm long.

S & F LED batten suitble for indoor application 20 W, 4' length , wall mounted with aluminium housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-Charge. Make : Havells Cat part No LH EXACP7IN1W 020 or equivalent in Crompton/Philips

Supply and fix bulkhead light fitting LED, 1X9 W luminaires with B22 lamp holders etc complete with all aceessories including connecting up with twin core twisted flexible copper conductor cable complete all as specified and as directed by Engr-in Charge.

M & L lamp holder (Angular) PVC/poly carbonate type with back plate suitable for batten fittings

Supply & fix LED lamp B22 base 10 W, min lumen output 950 lumens at 6500 K CCT for batten holders complete all as specified and as directed.

M & L earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified & as directed

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M deep and getting out in soft and loose soil as directed.

Removal of surplus soil to a distance not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point.

Material and labour for sand cushioning for under ground cables, spread in trenches, river sand including cleaning, spreading levelling, punning for laying/cushioning of cable all as directed. with layer of 8 cm deep before laying cable and 15 cm depth after laying and stretching the cable complete all as directed. Note: For the Purpose of payment puned thickness shall be measured.

Supply and laying of 40 to 50 mm thick roughly hammered stone slab 25 to 30 cm wide & not less then 60cm long laid down in trenches connecting to each other with gaps between adjacent slab not exceeding 10 mm over under ground cable for protection complete all as directed at site

M&L for PCC 1:3:6 type C1 using (20 mm graded stone aggregate) for make good to road surface , hard standing etc

Supply & Fix GI pipe light grade 40 mm dia for cable protection laid in trenches under road/culvert etc complete all as specified and as directed.

Supply & Fix GI pipe light grade 40 mm for cable protection fixed to poles/bldg incl two Nos MS clamps made to shape out of 25 x 3mm MS flat and painting incl bolt, nut, washer etc.

Supply and Laying, connecting all testing and commissioning of XLPE insulated, earthed, screened, PVC bedded, galvanised steel strip or wire armoured electric (heavy duty) with stranded aluminium conductor 1100 volts grade cross sectional area of 16 sqmm 2 core. Note: 1. Exacavation, earth work, sand, bricks and PCC will be measured and paid under relevant items.

Supply & Fix GI pipe medium grade 25 mm dia laid in trenches including all necessary fittings complete all as specified and as directed.

M/s Malinath Electricals

Devi Engineeing

m/s sai construction company,bijarar

m/s jogaram sujaram