Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.3 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹24.5 L+₹1.8 L (8.02%)Rejected-Finance CHHATARPUR DISTRICT MADHYA PRADESH | L2 | Rejected-Finance not being lowest | |
| 3 | L3₹25.0 L+₹2.4 L (10.4%)Rejected-Finance FLAT NO 8 205 SNO 296 2 DIVINE HOMES PORWAL ROAD KSHEGAON PUNE 411 047 | PUNE | PUNE | MAHARASHTRA | 411047 | L3 | Rejected-Finance not being lowest | |
| 4 | L4₹26.7 L+₹4.0 L (17.8%)Rejected-Finance FLAT NO 107 C WING SKYWAYS SERENO LOHEGAON PUNE 411 047 | PUNE | PUNE | MAHARASHTRA | 411047 | L4 | Rejected-Finance not being lowest | |
| 5 | L5₹27.9 L+₹5.3 L (23.3%)Rejected-Finance | L5 | Rejected-Finance not being lowest |
Tender Value
₹34.0 L
EMD Value
₹67,940
Closing Date
29 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (CME) Kirkee
Garrison Engineer (CME) Kirkee, Phugewadi, Dapodi, Kendriya vidyalay Gate , beside Unlimited (Mega Mart) Mall, Pune - 411 012
Upgradation and improvement of class room at F combat, CME
2022_MES_540766_2
8342/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer (CME) Kirkee
Class D, category a(i)
7 documents required · 7 mandatory
₹500
Garrison Engineer (CME) Kirkee
₹67,940
3 Nov 2022
16 Aug 2022
31 Aug 2022
16 Aug 2022
29 Aug 2022
17 Aug 2022
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings exc 15cm thickness (below or above ground level) all as specified and directed
M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in sub base of floors all as specified and directed
Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing and rubbish to permises complete all as specified and directed
M&L light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm in floors etc set and jointed in neat cement slury and pointed in white or coloured cement to match the shade, laid over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
All as per item No. 04 above, but in skirting, dado, sides of pillar and risers of sleps etc. over 10mm thick in CM 1:4 backing layer complete all as specified and directed.
Taking down chowkats or frames with shutter (without taking off shutters from the frames) not exc. 1.5 sqm each and removing from site complete all as specified and directed
Taking down chowkats or frames with shutter (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each and removing from site complete all as specified and directed
Demolition of brick work or stone/ boulder masonry built in cement mortar including ashlar facings, dressed stone work, precast concrete articles and precast concrete block walling complete all as specified and directed.
M&L precast solid block masonry of block in PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in wall exceeding 10 cm in width and built in cement mortar 1:6 complete all as specified and directed.
M&L Rendering 15mm thick on fair face of masonry/concrete surface in CM 1:4 finished even and smooth (without using extra cement) over and including 10 mm thick dubbing coat in CM 1:4 complete all as specified and as directed.
M&L 20mm thick granite (of any type) work, in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer on wall with thin layer of 3mm thick wall care putty (in two layer) all as specified and directed.
M & L for preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.
M & L for preparation of old surface of steel of any description, over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed
S&F in repair 19/20 mm dia medium weight, aluminium powder coated of choice colour as in drapery rod/ curtain rod complete all as specified and directed
S&F in repair 12 mm thick Veneered decorateive plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work all as specified and directed.
S & F in repair aluminium powder coated brackets, decorative type of colour and design as approved suitable for curtain rods of 19/20mm dia complete all as specified and directed
M & L for complete scraping down of old decorative surface of walls with steel wire brushes of smoke spots, moulds, moss efflorecent salts and applying complete wall with 3mm POP/Birla putty for making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed by Engineer-in-Charge.
S&F for aluminium anodized three track sliding window with two or more shutter with 4 mm thick plain glass, one shutter of stainless steel mosquito proofing with stainless steel wire gauge (wire cloth) 0.31mm nominal dia of wire and width of aperture 1.61mm using aluminium powder coated section, good quality bearing, handle lock,etc rubber beading and glazing clips etc using following sections as given in 'JINDAL' catalogue including taking down existing old window of any description complete all as specified and directed.
Three track top & vertical - Jindal main-- 2010 Section No. 20621.
Three track bottom - Jindal main-- 2010 Section No. 20620.
Shutter vertical section- Jindal main-- 2010 Section No. 20606.
Shutter top & bottom - Jindal main-- 2010 Section No. 20604.
Shutter vertical middle (interlock) - Jindal main-- 2010 Section No. 20605.
M & L for false ceiling with 4mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm, main tee of size 24mm x38mm x 0.7mm, cross tee of size 24mm x 28mm x 0.7 mm using purpose made members interlocking to each other and with 40mm x 3mm flat GI mild steel strip suspender made to shape at 1200mm c/c fixed with 3mm dia GI wire and making holes etc all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction make of GI Grid work : Armstrong/Swastik/Techno Grid and E board Gypsum or equivalent approved .
S&F aluminium colour powder coated anodised door and shutter or double leaf glazed/prelaminated board exterior quality partly glazed/prelaminated board exterior quality partly glazed panels fabricated including aluminium anodised beading rubber and packing materials and shall be drilling in existing wall and thrust bolt suitable size including taking down existing old door of any description complete comprising the following:- (a) Aluminium colour anodised door frame section 101.60x44.45x1.93 mm fixed as per specified (b) Aluminium colour anodised vertical section in shutter 85x44.45x2 mm as per specified (c) Aluminium colour anodised top & stile shutter section 95.25x44.45x2.00 mm as per specified (d) Aluminium clolour anodised handle 02 Nos in each shutter 200 mm long as specified (e) Aluminium clolour anodised middlelock rail/bottom rail section 150x44.x2.65mm cat No 20002 Make- Jindal (f) Floor spring Make -Sandhu (g) Six lever mortice lock brass Make : Godrej/Classic on in each door (h) 12mm thcik particle board (pre laminated both face) exterior grade ISI Marked (j) Tinted glass/plain glass (colour) 5mm thick Make: Saint Gobain Note :- If ground requirement for full glass or full panel contractor should provide as per direction of Engr-in-Charge
M&L for plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, exc 13 & n. exc. 25 sq. cm second class H/W complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness including cover fillets all as directed.
M&L for Perforated particle board/tiles for insulation and accoustic purpose, 60x60 cm in size, 12mm thick, fixed with nails to timber frame work or with staples on snap grid complete all as specified and directed.
M&L for providing & fixing 12mm thick gypsum board in ceiling (two or three stages if required) including GI U-section 50mmx35mmx7mm & edge side GI U-section size 30mmx25mmx15mmx7mm fixed with screw gypsum board and frame grid suspended with soffit cleat to roof slab for hanging 4mm dia GI hanger rod with adjustable level clips, after fixing of gypsum board jonits/junction of gypsum board ceiling to be covered with 50mm to 100mm corner strips, Round at fan & lights, cut for cassette AC indoor unit and light complete all as specified and as per manufacture's instruction and applying two coats of Luster Paint over 3 mm POP to visible side of gypsum board ceiling shade/tint complete all as specified and directed by Engr-in-Charge
Taking down carefully copper/aluminium point wiring (light, fan,bell, socket or power) complete, including fixture and fittings such as switches, ceiling rose, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc . credit for above items should be made as per conditions separately.
M&L for point wiring with FRLSH cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping/conduit with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl modular box surface/ flush type with modular sheet for mounting fittings such as switches, sockets, fan regulators, etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc for the following :-
One light point controlled by one switch
One fan/exhaust fan point controlled by one switch and regulator
Socket outlet, three pin 5 Amps on the same board
Socket outlet, three pin, 5 Amp, independent
All as per item No . 27 above, but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multipin 15 amps socket outlet flush type on independent board.
S&F switch modular, one way 6 Amps, 1 module with suitable plate and cover complete all as specified and directed.
S&F switch modular one way 16 Amps, 1 module with suitable plate and cover complete as per exisisting make and model all as specified and directed.
S&F socket modular 6 Amps, 2/3 pin combined 2 module with suitable plate and cover complete as per existing make and model all as specified and directed.
S&F socket modular 6A/16A, 2/3 pin combined 2 module with suitable plate and cover complete as per existing make and model all as specified and directed.
S & F ceiling rose, 3 terminal PVC/polycarbonate isolated body, surface bakelite 65 x 50 mm, 3 terminal incl PVC square block complete all as specified and directed.
S&F LED panel 2 feet x 2 feet size 36 wattt glare free symmetrical including driver and taking down old UNSV one complete all as specified and directed. Make- Havells cat No VENUSNEO2X2PLR36WLED857STTR or equivalent of Philips/Bajaj
Supply and fixing wall mounting fan (air circulator) single phase oscillating type 450mm sweep 230 Volts complete all as specified and directed.
S&F Octane LED Panel Round Slim 6 Watt, compact, aluminium die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver Make- Havells cat No LHEBHDP7IZ1W006 or equivalent of Philips/Bajaj
M&L for sub main wiring with two run of 4 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLSH cable in and including 1100 volt electrical grade PVC Conduit of desired colour not less than1.2 mm thick and 25 mm wide & 4 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and directed including taking down old unserviceable one.
All as per item No.37 above, but size 1.5 Sqmm two runs and with one run 1.5 Sqmm FRLSH copper wire for earth continuity. Make of wire-- Finolex/Havells/Polycab/Plaza. Note for Sl item No. 37 & 38 : Two run of cable, one run of earthing cable and one run of PVC conduit together measured as one length only.
Supply and fix sub main PVC insulated cable with copper condcutor 6 sqmm three core drawn through pvc conduit complete all as specified and as directed.
S&F enclosure, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 240 volt incl taking down old UNSV one.
Taking down celing fan of any size after disconnecting the wire from existing ceiling rose and deposited to MES Store (AGE E/M sub division) and Supply and fixing ceiling fans complete with blades, down rods, Modular regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)
S&F in replacement MCB distribution board Double door SPN 240 volts 8 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc incl taking down old unserviceable one.
S&F MCB distribution board Double door SPN 240 volts 12 way with 200 amps rated bus bar and making good to disturbed surfaces of floors, walls etc incl taking down old unserviceable one. .
S & F MCB SP 6 to 32 Amps, 230 V AC incl taking down old unserviceable one complete all as specified and directed.
S & F MCB SPN 63 Amps, 230 V, AC incl taking down old unserviceable one complete all as specified and directed.
M & L for earthing complete with GI earth plate electrode of size 60 x 60 x 0.6 cms thick burried directly in ground vertically at a depth of not less than 2.25 Mtrs below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanised iton strip of 25 x 4 mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full length of earth plate, 40 mm dia GI tubing light grade protection pipe upto test point, 20 mm dia GI watering pipe with funnel and wire mesh, PCC pit 1:3:6 with pit cover of size 30x30 CM made of RCC 1:3:6 with suitable handle, angle iron frame of angle iron size 40 x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, removal of surplus soil and returning filling in all as required at site all as specified in plate No 3 of SSR Part-I and directed by Engr-in-Charge.
M & L second class hard wood plain fillet, square, rectangular or triangular in section, clean sawn, bull nosed, splayed, chamfered or rounded on one edge or face exc. 6 sqm but not exc. 13 sqm, secured with nails or brads all as specified and directed.
M & L for preparation of old polished surfaces of wooden by removing stains/spots with sand papers filling the holes/cracks, cavities with wood filler/bees wax and polishing with two coats of teak wood colour melamine polish as approved by Engineer-in-Charge complete all as specified and directed.
Mahakal Construction Company
BSK Construction
Mukund Engineers and Contractors
Vastushilpa Contrustion
Aishwarya Constructions
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .