SOPD_G_19_20_56 Re-Construction of Road from (a) Deokura Lachanga Road, (b) Kalgachia to Sorbhog via- Tengagaon Road, (c) Gunialguri to Digjani Road, (d) Navajyoti College Approach Road, (e) Balikuri Bazar to Janata Bazar Road, (f) Tapeswara Khudraku

Amount

(a) Deokura Lachanga Road By mix in Place Method Construction of granular sub-base by Providing well graded material, spreeding in uniform layers with by tractor with grading attachment on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density , complete as per Technical specification cl. 401 .

Water Bound Macadam Providing, laying, spreading and compacting stone aggregate of specific size toWBM specification including spreading in uniform thickness, hand packing rolling with three wheel 80-100kN static roller in stages to proper grade and camber applying and brooming, stone screening/bindingmaterials to fill up the inter slices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause. 3) Grading-III (A) By manual means

Prime Coat ( I) Low porosity Providing and applying primmer coat with bitumin emultion (SS-1) on prepared surcafe of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per technical Clause

Tack Coat. (II) Providing and applying tack coat with bitumin emultion (CRS-1) using emultion distributor at the rate of 0.25-0.30 Kg/sqm on the prepared dry and hungry bituminius surface cleaned with hydraulic broom as per technical specification clause 503

Semi - Dense Bituminous Concrete (Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect. B(ii)with 60/70 or VG -30 grade bitumen for GradingII(10 mm nominal size)

Retro reflectorised Traffic sign: Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand) 80cmm x 60 cm rectangular

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications

Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.

Planting of Trees and their Maintenance for one Year Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year

(b) Kalgachia to Sorbhog via- Tengagaon Road Water Bound Macadam Providing, laying, spreading and compacting stone aggregate of specific size toWBM specification including spreading in uniform thickness, hand packing rolling with three wheel 80-100kN static roller in stages to proper grade and camber applying and brooming, stone screening/bindingmaterials to fill up the inter slices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause. 3) Grading-III (A) By manual means

Prime Coat ( I) Low porosity Providing and applying primmer coat with bitumin emultion (SS-1) on prepared surcafe of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per technical Clause

Tack Coat. (II) Providing and applying tack coat with bitumin emultion (CRS-1) using emultion distributor at the rate of 0.25-0.30 Kg/sqm on the prepared dry and hungry bituminius surface cleaned with hydraulic broom as per technical specification clause 503

Semi - Dense Bituminous Concrete (Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect. B(ii)with 60/70 or VG -30 grade bitumen for GradingII(10 mm nominal size)

Retro reflectorised Traffic sign: Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand) 80cmm x 60 cm rectangular

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications

Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.

Planting of Trees and their Maintenance for one Year Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year

(c) Gunialguri to Digjani Road By mix in Place Method Construction of granular sub-base by Providing well graded material, spreeding in uniform layers with by tractor with grading attachment on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density , complete as per Technical specification cl. 401 .

Water Bound Macadam Providing, laying, spreading and compacting stone aggregate of specific size toWBM specification including spreading in uniform thickness, hand packing rolling with three wheel 80-100kN static roller in stages to proper grade and camber applying and brooming, stone screening/bindingmaterials to fill up the inter slices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause. 3) Grading-III (A) By manual means

Prime Coat ( I) Low porosity Providing and applying primmer coat with bitumin emultion (SS-1) on prepared surcafe of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per technical Clause

Tack Coat. (II) Providing and applying tack coat with bitumin emultion (CRS-1) using emultion distributor at the rate of 0.25-0.30 Kg/sqm on the prepared dry and hungry bituminius surface cleaned with hydraulic broom as per technical specification clause 503

Semi - Dense Bituminous Concrete (Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect. B(ii)with 60/70 or VG -30 grade bitumen for GradingII(10 mm nominal size)

Retro reflectorised Traffic sign: Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand) 80cmm x 60 cm rectangular

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications

Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.

Planting of Trees and their Maintenance for one Year Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year

(d) Navajyoti College Approach Road By mix in Place Method Construction of granular sub-base by Providing well graded material, spreeding in uniform layers with by tractor with grading attachment on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density , complete as per Technical specification cl. 401 .

Water Bound Macadam Providing, laying, spreading and compacting stone aggregate of specific size toWBM specification including spreading in uniform thickness, hand packing rolling with three wheel 80-100kN static roller in stages to proper grade and camber applying and brooming, stone screening/bindingmaterials to fill up the inter slices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause. 3) Grading-III (A) By manual means

Prime Coat ( I) Low porosity Providing and applying primmer coat with bitumin emultion (SS-1) on prepared surcafe of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per technical Clause

Tack Coat. (II) Providing and applying tack coat with bitumin emultion (CRS-1) using emultion distributor at the rate of 0.25-0.30 Kg/sqm on the prepared dry and hungry bituminius surface cleaned with hydraulic broom as per technical specification clause 503

Semi - Dense Bituminous Concrete (Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect. B(ii)with 60/70 or VG -30 grade bitumen for GradingII(10 mm nominal size)

Retro reflectorised Traffic sign: Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand) 80cmm x 60 cm rectangular

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications

Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.

Planting of Trees and their Maintenance for one Year Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year

(e) Balikuri Bazar to Janata Bazar Road By mix in Place Method Construction of granular sub-base by Providing well graded material, spreeding in uniform layers with by tractor with grading attachment on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density , complete as per Technical specification cl. 401 .

Water Bound Macadam Providing, laying, spreading and compacting stone aggregate of specific size toWBM specification including spreading in uniform thickness, hand packing rolling with three wheel 80-100kN static roller in stages to proper grade and camber applying and brooming, stone screening/bindingmaterials to fill up the inter slices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause. 3) Grading-III (A) By manual means

Prime Coat ( I) Low porosity Providing and applying primmer coat with bitumin emultion (SS-1) on prepared surcafe of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per technical Clause

Tack Coat. (II) Providing and applying tack coat with bitumin emultion (CRS-1) using emultion distributor at the rate of 0.25-0.30 Kg/sqm on the prepared dry and hungry bituminius surface cleaned with hydraulic broom as per technical specification clause 503

Semi - Dense Bituminous Concrete (Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect. B(ii)with 60/70 or VG -30 grade bitumen for GradingII(10 mm nominal size)

Retro reflectorised Traffic sign: Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand) 80cmm x 60 cm rectangular

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications

Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.

Planting of Trees and their Maintenance for one Year Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year

(f) Tapeswara Khudrakuchi Road Scarifying the existing Bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4

By mix in Place Method Construction of granular sub-base by Providing well graded material, spreeding in uniform layers with by tractor with grading attachment on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density , complete as per Technical specification cl. 401 .

Water Bound Macadam Providing, laying, spreading and compacting stone aggregate of specific size toWBM specification including spreading in uniform thickness, hand packing rolling with three wheel 80-100kN static roller in stages to proper grade and camber applying and brooming, stone screening/bindingmaterials to fill up the inter slices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause. 3) Grading-III (A) By manual means

Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per technical specification Clause 1906.

Prime Coat ( I) Low porosity Providing and applying primmer coat with bitumin emultion (SS-1) on prepared surcafe of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per technical Clause

Tack Coat. (II) Providing and applying tack coat with bitumin emultion (CRS-1) using emultion distributor at the rate of 0.25-0.30 Kg/sqm on the prepared dry and hungry bituminius surface cleaned with hydraulic broom as per technical specification clause 503

Semi - Dense Bituminous Concrete (Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect. B(ii)with 60/70 or VG -30 grade bitumen for GradingII(10 mm nominal size)

Providing and laying Interlocking Concrete Block Pavement (ICBP) conforming to IS:15658-2006 including all lead and lift complete as per technical specification and as directed. (a) 80mm thick interlocking precast blocks having compressive strength of 40N/sq.mm.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (ii)60 cm equilateral triangle

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (iii)60 cm circular

(g) Khudrakuchi Bankubhanga Road By mix in Place Method Construction of granular sub-base by Providing well graded material, spreeding in uniform layers with by tractor with grading attachment on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density , complete as per Technical specification cl. 401 .

Water Bound Macadam Providing, laying, spreading and compacting stone aggregate of specific size toWBM specification including spreading in uniform thickness, hand packing rolling with three wheel 80-100kN static roller in stages to proper grade and camber applying and brooming, stone screening/bindingmaterials to fill up the inter slices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause. 3) Grading-III (A) By manual means

Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per technical specification Clause 1906.

Prime Coat ( I) Low porosity Providing and applying primmer coat with bitumin emultion (SS-1) on prepared surcafe of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per technical Clause

Tack Coat. (II) Providing and applying tack coat with bitumin emultion (CRS-1) using emultion distributor at the rate of 0.25-0.30 Kg/sqm on the prepared dry and hungry bituminius surface cleaned with hydraulic broom as per technical specification clause 503

Semi - Dense Bituminous Concrete (Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect. B(ii)with 60/70 or VG -30 grade bitumen for GradingII(10 mm nominal size)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (ii)60 cm equilateral triangle

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (iii)60 cm circular

Supplying fitting & fixing RCC guard post 150cm long erected 75cm above the ground and 75cm below the ground with M-15 grade concrete and required reinforcement tied in position with anneled black wire including cencering,moulding the top,curing including painting concrete surface in 23cm strips upto 0.75m from the top alternately in black and white and having 2nos reflective band of desired shade etc. complete as per design and as directed.

Painting two coats including primer coat with epoxy paint of approved brand on concrete/steel surfaces after through cleaning of surfce to give an even shade as per drawing and Technical specifiction clause 1701

(h) Khtakuchi Chakla Road Scarifying the existing Bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4

Water Bound Macadam Providing, laying, spreading and compacting stone aggregate of specific size toWBM specification including spreading in uniform thickness, hand packing rolling with three wheel 80-100kN static roller in stages to proper grade and camber applying and brooming, stone screening/bindingmaterials to fill up the inter slices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause. 3) Grading-III (A) By manual means

Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per technical specification Clause 1906.

Prime Coat ( I) Low porosity Providing and applying primmer coat with bitumin emultion (SS-1) on prepared surcafe of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per technical Clause

Tack Coat. (II) Providing and applying tack coat with bitumin emultion (CRS-1) using emultion distributor at the rate of 0.25-0.30 Kg/sqm on the prepared dry and hungry bituminius surface cleaned with hydraulic broom as per technical specification clause 503

Semi - Dense Bituminous Concrete (Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect. B(ii)with 60/70 or VG -30 grade bitumen for GradingII(10 mm nominal size)

Providing and laying Interlocking Concrete Block Pavement (ICBP) conforming to IS:15658-2006 including all lead and lift complete as per technical specification and as directed. (a) 80mm thick interlocking precast blocks having compressive strength of 40N/sq.mm.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (ii)60 cm equilateral triangle

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (iii)60 cm circular

(i) Khatartari Bonghugi Road Scarifying the existing Bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4

(A) By mix in Place Method Construction of granular sub-base by Providing well graded material, spreeding in uniform layers with by tractor with grading attachment on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density , complete as per Technical specification cl. 401 .

Water Bound Macadam Providing, laying, spreading and compacting stone aggregate of specific size toWBM specification including spreading in uniform thickness, hand packing rolling with three wheel 80-100kN static roller in stages to proper grade and camber applying and brooming, stone screening/bindingmaterials to fill up the inter slices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause. 3) Grading-III (A) By manual means

Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per technical specification Clause 1906.

Prime Coat ( I) Low porosity Providing and applying primmer coat with bitumin emultion (SS-1) on prepared surcafe of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per technical Clause

Tack Coat. (II) Providing and applying tack coat with bitumin emultion (CRS-1) using emultion distributor at the rate of 0.25-0.30 Kg/sqm on the prepared dry and hungry bituminius surface cleaned with hydraulic broom as per technical specification clause 503

Semi - Dense Bituminous Concrete (Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect. B(ii)with 60/70 or VG -30 grade bitumen for GradingII(10 mm nominal size)

Providing and laying Interlocking Concrete Block Pavement (ICBP) conforming to IS:15658-2006 including all lead and lift complete as per technical specification and as directed. (a) 80mm thick interlocking precast blocks having compressive strength of 40N/sq.mm.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (ii)60 cm equilateral triangle

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (iii)60 cm circular

KUSHAL KONWAR