REPAIR AND PAINTING TO CERTAIN STEEL AND WOODEN FURNITURE INCLUDING OP WKS SHELTER FURNITURE AT PMS UNDER GE PANAGARH

Amount

Bed Hard MAP (FD-FD/E6/MAP/08 (R)/Sketch 'W' Job No- 3051/2983/ 3449/3450)

Removing the existing unserviceable Ply wood from Hard Bed and making the frame to its original position by tightening etc and Supply & fixing with new ply wood 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.

Removing the existing unserviceable Foot Board from Hard Bed and making the frame to its original position by tightening etc and Supply & fixing with new Pre Laminated Particale Board 18mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.

Removing the existing unserviceable Head Board from Hard Bed and making the frame to its original position by tightening etc and Supply & fixing with new Pre Laminated Particale Board 18mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.

Removing the worn out paint from internal/external surface of almirah steel large by scraping. Necessary preparation of surface for painting duly dented/pitted and smoothen the surface by putty and painting the internal and external surface with two coat of synthetic enemalled paint over a coat of primer Metal to bring the surface to a glossy shine as directed by Engr-in-Charge.

Repair/Re-canning of chair Easy Remove of existing unserviceable under mentioned members and providing the new one made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg. (FD-229 / Sketch 'PQ' Job No- 3051/34530)

Front Legs

Front rail of seat frame

Side Rail

Back Rail

Arm Rest

Removing the existing unserviceable canning and supply and weave with 2 mm thick new white plastic cane oval shape Godrej pattern and beading with 4mm thick new white plastic cane make Ajay /premier as approval by GE and providing new hard rubber shoes on legs below of chair Easy.

Preparation of surface by Remove of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge .

Repair of Chair Dinning (FD/MAP/II/05 /Sketch 'Y' Job No- 3049/3448/3588/3611)

Removing the existing unserviceable/broken PVC seat from chair dinning and supply & fixing the new PVC seat 4mm existing size in its original position all as shown on drg and directed by Engr-in-Charge.

Removing of existing unserviceable under mentioned members and providing the new one made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drawing.

(i) Front Legs

(ii) Rear Legs

(iii) Front rail of seat frame

(iv) Side Rail

(v) Back Rail

(vi) Short stiffener

(vii) Back rest batten

(viii) Preparation of surface by Remove of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge here-in-before but for Chair Dining

Repair/Re-canning of Chair Writing Removing of existing unserviceable under mentioned members and providing the new one made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg. (FD-280 / Sketch 'X' Job No- 3051/3453/3454/3583/3923)

Front Legs

Rear Legs

Front rail of seat frame

Side Rail

Long Stiffener

Back rest batten

Arm rest

Removing the existing canning and supply and weave with 2mm thick new white plastic cane oval shape godrej patern and beading with 4mm thick new white plastic cane make : Ajay/Premium as apporeved by GE and providing new hard rubber/PVC shoes at the bottom of the chair.

Preparation of surface by Remove of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge here-in-before but for chair writing.

Chair Auditorium (TP)

Removing of existing unsv upholstry Seat of Chair Auditorium and S&F new upholstry. The colour of fabric as approved by GE.

Removing of existing unsv upholstry Back of Chair Auditorium and S&F new upholstry. The colour of fabric as approved by GE.

Removing of existing unsv Arm rest of Chair Auditorium and S&F new arm rest of Make- Zuari, Model No ZAC-102 and making functional.

Tightening of loosen side pannel by the help of removing old fastener and inserting new fastener of required size and tighten them.

Tightning of loosen back of chair Auditorium by inserting new Nut, bolt & washer of size 6 mm dia, 65 mm long.

Double Sleeping Bunk (Sketch 'X' Job No- 3208/3451)

Removing the existing unserviceable Ply wood from Double Bunk and making the frame to its original position by tightening etc and Supply & fixing with new ply wood 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.

Removing the existing unserviceable Ladder from Double Bunk and making the frame to its original position by tightening etc and Supply & fixing with new MS Pipe 20 mm dia of existing shape & size and as directed by Engr-in-Charge.

Removing the worn out paint from internal/external surface of Double Bunk by scraping. Necessary preparation of surface for painting duly dented/pitted and smoothen the surface by putty and painting the internal and external surface with two coat of synthetic enemalled paint over a coat of primer Metal to bring the surface to a glossy shine as directed by Engr-in-Charge.

Locker Steel (Size 1200 x 900 x 430 mm) (FD-1029/ Sketch 'W' Job No- 3208/3449/3450/3609)

Removing of existing U/S top of locker steel and S&F new top made out of MS sheet 1.00 mm thick of existing size & shape

Removing of existing U/S bottom of locker steel and S&F new bottom made out of MS sheet 1.00 mm thick of existing size & shape

Taking out of broken door shutter from Locker Steel and re-fixing with new door shutter of existing size 1 mm thick . All as directed by Engineer-in-Charge and shown on drawing

Removing old broken damaged hasp of locker steel and S/F new hasp & staples of size 150 mm long chromium plated to the shutters of locker steel.

Removing old broken handle of locker steel and S/F new handle of size 100 mm long 'D' Type chromium plated to the shutters of locker steel.

Removing old broken hanging rod of locker steel and S/F new hanging rod made out of 20mm dia chromium plated pipe 500mm long of locker steel.

Removing the worn out paint from internal/external surface of Locker Steel Size 1200 x 900 x 430 mm by scraping. Necessary preparation of surface for painting duly dented/pitted and smoothen the surface by putty and painting the internal and external surface with two coat of synthetic enemalled paint over a coat of primer Metal to bring the surface to a glossy shine as directed by Engr-in-Charge.

Repair to Peg Table (FD-277/ Sketch 'Y' Job No- 3209/3453/3454/3583/ 3923)

Removing the old unserviceable leg and providing the new leg made out of 1st class teak Wood seasoned of size 30x50x362mm high and fixing the same in its original position as per drg.

Removing old broken top rail and providing the new top rail made out of 1st class hardwood teak of size 20mm x 40mm x380mm and fixing the same in its original position as per drg.

Removing the old top and providing the new top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing the same on peg table in its original position as per drawing and providing new hard rubber/PVC/Nylon shoes to the bottom of legs. Size of particle board shall be 450mm x 300 mm.

Preparation of surface by Remove of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge here-in-before but for Peg Table.

Chair Revolving (TP /Sketch 'W' Job No- 3252/3455/3614/3601)

Removing the old unsv back frame and S & F with Dimensions as shown on drngs. Back shall be of 18/19mm thick hot presed ply wood upholstered with fabric/ latherite cover and moulded polyurethane foam. The back frame shall be designed with contour lumber supports for extra conform with PVC lapping all arounds complete all as specified and directed.

Removing the old unsv seat frame and S&F Seat frame of size 510x470x60. seat shall be of 18/19mm thick hot presed ply wood upholstered with fabric/ latherite cover and moulded polyurethane foam complete all as specified and directed.

Removing the old unsv Hand Rest and S&F Hand Rest with Black intergral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant complete all as specified and directed

Removing the old unsv Pedestal assy and S&F Pedestal assy injection moulded in black 30% glass filled nylon. A 10.5mm dia forged bright sinc plated MS castor pin is of press fitted into each prong for holding the castor. It is 600mm pitch centre dia complete all as specified and directed.

Removing the existing unserviceable/broken Hydraulic from chair Revolving and supply & fixing the new Hydraulic existing size in its original position all as shown on drg and directed by Engr-in-Charge.

All as per item No 9.05 mentioned here-in-above but for tilt locking machanism assy.

Shoe Rack (Shelter) / Tray steel 3/4 spaces (FD-97(M)/1023 Sketch 'W2' Job No- 3912)

Removing of old unsv fillowing parts of Rack Shoe Steel & fixing new parts of following:

Replacement of unsv leg angle iron 25x25x750x5mm

Replacement of unsv Shelf 1mm MS Sheet fixing with nut bolt

Removing the worn out paint from internal/external surface of Shoe Rack by scraping. Necessary preparation of surface for painting duly dented/pitted and smoothen the surface by putty and painting the internal and external surface with two coat of synthetic enemalled paint over a coat of primer Metal to bring the surface to a glossy shine as directed by Engr-in-Charge.

Almirah Steel Size 1260 x 760 x 420 mm FD-1031/ Sketch 'X' Job No- 3053)

Removing of existing U/S top of Almirah Steel and S&F new top of made out MS sheet 1.00 mm thick of existing size & shape

Removing of existing U/S bottom of Almirah Steel and S&F new bottom of made out MS sheet 1.00 mm thick of existing size & shape

Taking out of broken door shutter from Almirah Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing

Removing the worn out u/s handle from the Almirah Steel and providing/fixing of new handle chromium plated heavy duty as approved by Engr-in-Charge/GE.

Removing the worn out u/s lock from Almirah Steel and providing/fixing with new lock 6 lever with deuplicate key ISI marked Link/Bharat of MS key plate as approved by Engr-in-Charge/GE duly fixed as per drawing.

Removing the worn out u/s 3 way locking device and providing/fixing the new one in its original postion as per drg.

Removing the worn out u/s leg and providing / fixing the new leg made out of MS sheet 1.00mm thick in its original position duly welded as per drg.

Taking out of u/s worn out shelf and providing the new one of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg.

Removing the worn out paint from internal/external surface of Almirah Steel large by scraping. Necessary preparation of surface for painting duly dented/pitted and smoothen the surface by putty and painting the internal and external surface with two coat of synthetic enemalled paint over a coat of primer Metal to bring the surface to a glossy shine as directed by Engr-in-Charge.

Locker Steel/ Cabinet (3000x1200x800mm) (Sketch 'W' Job No 3208)

Taking out of broken door shutter from Locker Steel and re-fixing with new door shutter of existing size 1 mm thick . All as directed by Engineer-in-Charge and shown on drawing.

Taking out of u/s worn out drawer and providing the new one of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg.

Removing old broken damaged hasp & stapples of locker steel and S/F new hasp & stappples of size 150 mm long chromium plated to the shutters of locker steel.

Removing old broken handle of locker steel and S/F new handle of size 100 mm long 'D' Type chromium plated to the shutters of locker steel.

Removing old broken hanging rod of locker steel and S/F new hanging rod made out of 20mm dia chromium plated pipe 500mm long of locker steel.

Removing the worn out paint from internal/external surface of Locker steel Cabinet by scraping. Necessary preparation of surface for painting duly dented/pitted and smoothen the surface by putty and painting the internal and external surface with two coat of synthetic enemalled paint over a coat of primer Metal to bring the surface to a glossy shine as directed by Engr-in-Charge.

Storage Rack steel 4 tier 1800 x 600x 2000mm (Sketch 'Y' Job No 3454)

Removing of unsv shelves of rack steel and S & F new shelves made of 1.25 mm thick MS Sheet in its originnal position as per drg & making functional

Removing of unsv MS angle iron from rack steel and S & F new MS angle iron to rack steel oprnrd type in its originzl position as per drg & making functional

Removing the worn out paint from internal/external surface of Locker steel Cabinet by scraping. Necessary preparation of surface for painting duly dented/pitted and smoothen the surface by putty and painting the internal and external surface with two coat of synthetic enemalled paint over a coat of primer Metal to bring the surface to a glossy shine as directed by Engr-in-Charge.

Table dining ORs / Table dining (Size 1800x900x750mm) FD-165(M)/ Sketch 'X'/PR Job No- 3049/3919

Removing the unsv top and fixing new 19Mm Thick Particle Board Bonded with phenol formaldehyde/19mm MD Fiber board exterior grade BWP type with 1.5 mm thick decorative laminate fixed on one side shall be used (rose wood of formica shade or sungloss shade) or equivalent.

Removing the existing unsv steel long rail from Table Dining ORs and S & F new steel long rail of size : 25mm x 25mm x 1.6mm thick, 1575mm long. All as shown on drg and directed by Engineer-in-Charge.

Removing the existing unsv MS legs from Table Dining ORs and S & F new leg made out of 25mm x 25mm x MS tube 1.6mm well thickness. All as directed by Engineer-in-Charge and as shown on drg.

Removing the existing unsv stiffner bottom and S & F new stiffner bottom made out of 25mm x 25mm, MS tube of 1.6mm well thickness. All as directed by Engineer-in-Charge and shown on drg.

Removing the existing unsv stiffner Top and S & F new stiffner top made out of 25mm x 25mm, MS tube of 1.6mm well thickness. All as directed by Engineer-in-Charge and shown on drg.

Removing the existing unserviceable shoes from Table Dining OR's and and S & F new PVC Shoes suitable for 25x2mm MS tube. All as directed by Engineer-in-Charge and shown on drg.

Painting (Removing the existing worn out paint from Table Dining OR's and applying one coat of synthetic enamell paint black over a coat of primer. All as directed by Engineer-in-Charge and shown on drg.

Table office/ Steel Table Type II (Size 780mmx1800x920) (Sketch 'B' Job No- 3445)

Removing old broken damaged top of Table office Steel and S/F new top made out of 18/19mm thick prelaminated particle board one side teak veneered with 19x4mm teak wood beading duly french polished all around the top.

Removing old u/s internal cupboard/drawer locks from Table office Steel and S/F new internal locks 40mm 4 lever with duplicate keys of approved quality.

Taking out of u/s worn out drawer and providing the new one of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg.

Repair of Drawer and worn out welding drawer in its original position existing size and shape. All as shown on drg.

Removing old broken u/s rubber shoes of Table office Steel and S/F new hard rubber shoes of approved quality & tightly fitted at the bottom of legs of Table Writing Steel

Painting (Removing the existing worn out paint from Table office steel and applying one coat of synthetic enamell paint black over a coat of primer. All as directed by Engineer-in-Charge and shown on drg.

Chair Visitor (FD/E6/MAP/12 / Sketch 'PP' /CJob No- 3053/3455)

S&F Back frame with Dimensions as shown on drngs. Back shall be of 18/19mm thick hot presed ply wood upholstered with fabric and moulded polyurethane foam. The back frame shall be designed with contour lumber supports for extra comfort with PVC lapping all arounds complete all as specified and directed.

S&F Seat frame of size 510x470x60. seat shall be of 18/19mm thick hot presed ply wood upholstered with fabric and moulded polyurethane foam complete all as specified and directed.

S&F Hand Rest with Black intergral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant complete all as specified and directed

Removing the worn out paint by scraping from the steel surface, necessary preparation of surface for painting and welding wherever required, two coat of spray painting with synthetic enamelled paint black over a coat of Metal primer after dent/bent portion.

Table Writing Steel (Size 900x600x760mm) (FD-1004 / Sketch 'X',C Job No- 3053/3455)

Removing old broken damaged top of Table Writing Steel and S/F new top made out of 18/19mm thick prelaminated particle board one side teak veneered with 19x4mm teak wood beading duly french polished all around the top.

Removing old u/s internal cupboard/drawer locks from Table Writing Steel and S/F new internal locks 40mm 4 lever with duplicate keys of approved quality.

Taking out of u/s worn out drawer and providing the new one of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg.

Repair of Drawer and worn out welding drawer in its original position existing size and shape. All as shown on drg.

Removing old broken u/s rubber shoes of Table Writing Steel and S/F new hard rubber shoes of approved quality & tightly fitted at the bottom of legs of Table Writing Steel

Painting (Removing the existing worn out paint from Table Writing Steel and applying one coat of synthetic enamell paint black over a coat of primer. All as directed by Engineer-in-Charge and shown on drg.

Board Notice/ Writing Board (1500x200mm) (FD-99(M))

Removing of unsv/broken existing door glass from board notice and S&F new door glass of 4 mm thick of existing shape and size and making functional

Removing of unsv/broken existing door shutter 2 way from board notice and S&F new door shutter of existing shape and size and making functional

Removing of unsv/torn out existing baize green cloth from board notice and S&F baize green cloth of existing shape and size and making functional

Removing of unsv existing soft wood board from board notice and S&F new soft wood board 19 mm thick of existing shape and size and making functional

Removing of unsv existing wooden frame of board notice and S&F new wooden frame of hard seasoned teak wood of existing shape and size and making functional

Preparation of surface by removal of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge.

M/S ACE BUILDERS

M/S Rana Enterprise

M/S Ali Trading Co