SPECIAL REPAIR TO BLDG NO T-237, T-238, PATHWAY TO BLDG NO T-141 TO T-144 IN OTM, CERTAIN MINOR WORKS UNDER AGE B/R-II OF GE (N) MAMUN

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed.

All as per Item No1 but area exceeding 1.5 Sqm and n.exc 4 Sqm each

M&L for aluminium frame (powder coated) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

M&L for aluminium (powder coated) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, aluminum (powder coated) snap beading screws etc complete all as specified and directed.

M&L for aluminium (powder coated) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium (powder coated) snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F aluminium (powder coated) grill aperture n exc 50mm x50mm and size of wire not less than 08mm fixed to aluminium frame with zinc coating screws etc complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

M&L for stainless steel wire cloth 0.38 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or galvanized wire staples complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares size n.exc 0.5 sqm in each pane complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc) sheets /PGI sheets in roof coverings, rubbish off the premises complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thick of an approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as in roof complete all as specified and directed.

All as per item 11 but GI based plain steel sheet

M&L for False ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders (not less than 4mm dia GI wire) of standard galvanised sections in a grid size of 600x600mm of manufacturer including taking down existing ceiling board & grid work etc of any type/pattern, removal of rubbish complete all as specified and directed.

M&L for 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6), finished even and smooth without using extra cement, preparing surface, applying wall care putty to obtain even and somooth surface, applying two coats of Oil bound distemper over a coat of primer complete all as specified and directed

M&L for 15mm thick cement plaster (in two coats-1st coat 10mm thick, 2nd coat 5mm thick mixed with WPC as per manufacturer's instructions) on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement preparing surface and applying two coats of exterior emulsion weather coat (Appex) over a coat of primer complete all as specified and directed. (WPC shall be measured and paid sepaerately)

Supply only liquid water proofing compound complete all as specified and directed.

M&L for Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level), rubbish off the premises complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor etc set in neat cement slurry and pointed in coloured cement to match over screed bed or bedding layers of mortars 15 mm thick in CM 1:4 complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular) polished , area of each tiles not exceeding 0.36 sqm in skirting/dado/risers of steps etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match over bedding/backing layer of mortar 10mm thick in CM (1:4) including taking down old tiles on walls etc, rubbish off the premises complete all as specified and directed.

All as per item 19 but for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors including dismantling old tiles etc rubbish off the premises

All as per item 20 but for 7-8mm thick glazed ceramic coloured tiles in vertical surface of size 450x300x7mm thick.

M&L for 25 mm thick PCC 1:2:4 type B-1(using 20mm graded stone aggregate) in sub floor, flooring complete all as specified and directed.

M&L for broken brick hardcore of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to ture surfaces etc complete all as specified and directed.

M&L for Brick work with fly ash brick (nominal size) sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and directed.

M&L for Demolition of brickwork or stone boulder masonry, built in cement mortar including all quions, arches ,pillar etc but excluidng ashalr facing , dressed stone work and precast concrete articles etc, rubbish off the premises complete all as specified and directed.

M&L for Dismantling of existing framed trusses of span n.exc 10mtr, refixig of trusses on base plate anchore with holding down bolt/screws, painting truss with two coats of synthetic enamel paint after preparation of old painted steel surface complete all as specified and directed. (bolt/screws to measured and paid separately)

All as per item 26 but rolled mild steel as in tubular purlins, rafters etc

S&F steel works in tubular truss special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 GRADE st-240 withtwo coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F GI round flat washers for 16 mm dia complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 45cm long, 16 mm diameter of shank, complete all as specified and directed.

M&L for Rolled mild steel in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410-W(Gde-E-250 Quality -A) complete all as specified and directed.

S&F in repair Curtain rails, anodised aluminium alloy with bracket, end bulbs, fancy type, fixed in position as approved complete all as specified and directed.

M&L for 75mm thick PCC type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and pavings, laid in slope finished even and fair, making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed.

M&L for RCC 1:2:4 tye B-1 using 20 mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span and the like including demolition of reinforced cocnrete, removal of rubbish beyond premises complete all as specified and directed.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L for mild steel TMT bars 5 to 8mm dia cut to length, bent to shape required including crancking bending and hooping ends for stirrups with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required including crancking bending and hooping ends with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor Overall length of cover plate 150mm complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc. rubbish off the premises complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore complete all as specified and directed.

All as per item 41 but for 20mm bore pipe

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed.

All as per item 43 but for 20mm bore pipe

M&L for Refixing of old steel tubing 15 mm bore, medium grade galvanized ISI marked with all new fittings short pieces and fixed complete to walls, floor etc complete all as specified and directed.

All as per item 45 but for 20mm bore pipe

M&L for cutting chases pinning in brick mass and making good to facing where required, pointing in cement, making good in CM 1:3, cutting n.exc. 10 cm in girth complete all as specified and directed.

S&F Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe, 15mm bore dia, in reapirs complete all as specified and directed.

All as per item 48 but for 15mm bore dia Stop valve concealed type

S&F in repair Bib taps 15 mm bore dia, cast copper alloy fancy type chromium plated fixed in repairs complete all as specified and directed. of Make - Jaquar , Marc and Johnson

S&F in repair CP wall mixer fancy type with hot & cold tap for 15mm bore pipe etc complete all as specified and directed.

S&F in repair for CP central hole Wash basin Mixer with hot and cold mixing etc complete all as specified and directed.

S&F in repairs Vitreous china wash basin, white flat back, size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste coupling 32mm size full thread , complete all as specified and directed.

S&F in repair towel rail CP 600 mm long complete all as specified and directed.

S& F in repair CP Shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. .

S&F in repair PVC flushing cistern 10 ltr capacity including PVC connection inlet and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F Vitreous china wash down water closet pan pedestal pattern, white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), including making connections to trap, and to flush pipe including plastick seat and cover (As directed ) with stainless steel or aluminised hinging device and fixed in repair complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks of capacity 1000 litres two layerd (cylindrical vertical with closed top), ISI marked hoisted and fixed in position all as specified in SSR Part I, including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tank of any capacity complete all as specified and directed.

S&F in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed, cast copper alloy, chromium plated fancy type, ISI marked with crutch or butter fly handles screwed down screwed for iron pipe complete all as specified and directed.

S&F 20 mm size gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed, cast copper alloy, chromium plated fancy type, ISI marked with crutch or butter fly handles screwed down screwed for iron pipe complete all as specified and directed.

M&L for 20mm thick cement concrete tiles size 30cmx30cm, machine pressed, set jointed and pointed in neat cement slurry in floors, cut and polished with grey cement and pigment etc over 15mm thick screed bed in cement mortar 1:4 etc over 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggreegate ) sub base floors etc complete all as specified and directed.

M&L for 100mm thick plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggreegate ) as in sub base , sub floors etc complete all as specified and directed.

Excavation in trenches n. exc 1.50 m wide and n.exc 1.50m in depth for foundation and getting out in any type of soil, complete all as specified and directed.

Dismantling of Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) laid dry complete all as specified and directed.

Surfaces excavtion n exc 30cm deep, averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.

Removing excavated materials to a distance exc 250m but n exc 500m and deposited where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L for 75mm thick plain cement concrete type C2 1:3:6 (using 40mm graded stone aggregate) as in sub floors, sub bases, floors and pavings etc complete all as specified and directed.

M&L for Machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L for Sand, filling under floor for sand cushioning etc, spreading and levelling in layers as required complete all as specified and directed.

M&L for Providing cement concrete Type B-1 (1:2:4), 20 mm graded stone aggregate as in coping, benching etc including necessary form work complete all as specified and directed. .

M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars of bore 100 mm complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks, straight or curved on plan to any radius built in CM 1:4 in half brick thick walls, complete all as specified and directed.

M&L for Reinforcement cement concrete M-25 ( Design mix) as in beams, cantilever, bressummeres lintels over 1.50m spam complete all as specified and directed.

M&L for Reinforcement cement concrete M-25 ( Design mix) as in Slabs supported on walls, beams and columns in floors roofs, landings, balconies, canopies, deck slabs, in shelves and the like complete all as specified and directed.

M&L for Reinforcement cement concrete M-25 ( Design mix) as in Chajjas complete all as specified and directed

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, including flat rough finished surafaces of concrete complete all as specified and directed.

M&L for Formework to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar works, flat rough finished surafaces of concrete; not exceeding 200mm thick (horizontal or sloping) complete all as specified and directed.

M&L for Formwork to chullah hoods, chajjas, troughs & similar items including edges, rough finished surfaces of concrete ( flat ) complete all as specified and directed.

Returning filling in in any type of soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Spreading, levelling, watering as required and well ramming in layers not exceeding 25cm thick soft/loose soil complete all as specified and directed.

M&L for Hardcore of guage exc 63mm, Broken Stones or Boulders deposited, spread & leveled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

M&L for screed bed or bedding layers of mortar 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.

M&L for 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed

M&L for 5 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:4) as in ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for two coats of white wash on walls including preparation of new plastered surfaces complete all as specified and directed

M&L for Preparation of new plastered surface of wall and chajjas, making the surface smooth with sand paper, priming the surface with alkali resistance primer paint and applying two coats of cement base paint including curing complete all as specified and directed.

M&L for two coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing complete all as specified & directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified & directed.

S&F Butt hinges, medium weight, cold rolled mild steel, and fixed of size 100mm complete all as specified & directed.

S&F 375 mm Mild steel skeleton tower bolts with steel sheet pressed plate and staple stove enamelled black, and mild steel bright bolt and fixed complete all as specified & directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified & directed.

S&F 150 mm size Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, ISI marked complete all as specified & directed.

S&F stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for iron pipe 15mm bore dia complete all as specified and directed.

S&F 15 mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F aluminium tubular towel rail 600 mm long complete all as specified and directed.

S&F shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300 gms) complete all as specified.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F 100 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified & directed.

S&F Cast Iron Branch peices, single (equal or unequal) ordinary or inverted (spigot or socket type), or with parallel branches fitted with oval access doors of 100 mm bore dia complete , ISI Marked, fixed complete all as specified & directed.

Extra over cast iron pipes and fittings if lead joint is provided in lieu of cement joint for 100mm complete all as specified & directed.

S&F in 75 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints complete all as specified & directed.

S&F 75 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified & directed.

S&F Cast Iron Branch peices, single (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 75 mm bore dia complete , ISI Marked, fixed in repairs complete all as specified & directed.

S&F CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified & directed.

Extra over cast iron pipes and fittings if lead joint is provided in lieu of cement joint for 75 mm complete all as specified & directed.

S&F 50 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints complete all as specified & directed.

S&F cast iron cowl for 50 mm dia complete all as specified & directed.

M&L for Providing precast cement concrete in cover slabs type B-1,1:2:4 (20 mm graded stone aggregate) including necessary form work for manhole cover etc, shelves and similar articles with plain faces, set in cement mortar 1:6 complete all as specified and directed.

M&L for Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified & directed.

S&F Viterous china urinals, half stall type, including CP coupling, waste pipe and all necessary fittings, complete including providing and fixing plugs , bedding urinal against wall in CM 1:2 , securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap, PVC seat cover for pedestal pan complete all as specified and as directed.

S&F PVC flushing cistern 10 ltr capacity including PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.

S&F vitreous China ware wash hand basin white of size 550 x 400mm including 32 mm dia CP waste coupling and PVC waste pipe and MS steel brackets complete all as specified and directed.

M&L for RCC pipe NP2 diameter 150mm pipe laid and jointed complete with collars complete all as specified & directed.

S&F 15mm bore pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked complete all as specified and directed.

M&L for 3000 ltr capacity, factory made LLDPE septic tank designed to carry sewage and sullage water, necessary excavation and earth work in any type of soil (excavation, returning filling in and removal of surplus soil), 150mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate foundation bed, 300mm fine sand filling to all around the tank, making Vent shaft connection etc., complete all as specified & directed.

S&F Jet Spray (with 1.50 mtr tube) fixed to EWC and Angular Stop Cock complete all as specified and directed.

M&L for Soakage well of Size 1.20 mtr dia X 3.00 mtr depth including necessary excavation and earth work in any type of soil, PCC foundation, brickwork in cement mortar (Honey combed and Solid), RCC band, RCC cover slab, manhole, CI vent pipe, filling with brick bats, etc complete all as specified and as shown in drawing no CE/TD-1202/2003 sheet 1 to 2.

M&L for concrete bed to drain pipes including forming cradles in cement concrete 1:3:6 type C2 for 150 mm dia pipe complete all as specified & directed.

M&L for 10mm thick plaster in cement mortar 1:3 finished even and smooth without using extra cement mixed with water proofing compound as per manufacture's instructions complete all as specified & directed. Note: water proofing compound shall be measured and paid separately)

M&L for PCC 1:2:4 type B-1 (using 20mm graded aggr) as in surface channels & drains complete all as specified & directed.

Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/stop ends etc complete all as specified & directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified & directed.

M&L for Reinforcement cement concrete type B0 1:2:4 (using 12.5mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors roofs, landings, balconies, shelves and the like complete all as specified & directed.

M&L for two coats of oil emulsion distemper over a coat of primer including preparation of new plastered surfaces walls complete all as specified and directed

S&F 2nd class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc ( divided into squares with plain chamfered or rounded , mitred and rebated sash bars, any numbers), edges of framing plain chamfered or rounded fitted with cut and mitered beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of PCC 1:3:6 type C-0 (12.50 mm graded stone aggregate) back of chowkhats, applying two coats of synthentic enamel paint over a coat of primer complete all as specified & directed.

All as per item 135 but size 125x60mm

S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I) Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated complete all as specified & directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified & directed.

M&L for Brick work with fly ash bricks straight or curved on plan exc. 6 M mean radius bult in cement mortar 1:4 complete all as specified & directed.

M&L for flush pointing in CM1:4 complete all as specified and directed

M&L for Steel tubular work including special shaped structure (as per sample), washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, including welded MS base plate, angle iron/flat iron cleates etc complete all as specified and directed.

Excavating in post holes in any type of soil n. exc. 0.50 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n. exc. 50 m and making good surface complete all as specified & directed.

M&L PCC type B2 1:2:4 (40mm grade stone aggregate) as in foundation filing and mass concrete complete all as specified and directed.

M&L for prepration of new steel surface of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for PCC 1:3:6 Type C-2 (using 40mm graded stone aggregate) in foundation, fillings and mass concrete complete all as specified and directed.

M&L for steel iron base plate plugs, bolts, and screws of Fe 410-W(Gde-E-250 Quality -A) complete all as specified and directed.

M&L for 75 mm thk PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:2:4 type B- 2, (using 40mm graded stone aggregate) in subbase, subfloors, base, floors and paving etc finished even and smooth without using extra cement etc complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, lamp holders, regulators, light fitting etc. removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

S&F brass 4 levers mortice lock, vertical type, 100mm size for doors complete all as specified and directed.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F Sheet glass, ordinary quality, fixed with and including rubber gasket as in partition etc in square exc 0.5 sq. m in each pane complete all as specified and directed.

M & L for point wiring using 3 x 1.5 Sqmm FRLS PVC insulated unsheathed /multi stranded copper conductor cable(Phase, neutral and earth wire) drawn through and incl concealed PVC conduit heavy grade of dia not less than 20mm and 1.8mm thick and connected to common earth dolly of approved make sunken modular metal flush gang box and suitable support frame and cover plate (inner/outer) of required modules for mounting moular switch, sockets, regulators etc including making connection of cable with MCBs through proper size copper/brass thimbles for one light/fan/exhaust fan point controlled by one 1 way switch complete all as specified and directed.

All as per Srl item No 150 here-in-before but for one 5 pin 5 Amp socket outlet point on same board controlled by one switch SP, one way 5 Amp, 240Volts.

All as per Srl item No 150 here-in-before but for one 5 pin 5 Amp socket outlet point on inependent board controlled by one switch SP, one way 5 Amp, 240Volts.

All as per item No. 150 above but with 3 x 2.5 Sqmm for 15 Amps socket/power point

S&F modular socket 6 Amp, 2/3 Pin multipurpose, 2 module, complete all as specified and directed.

S&F modular switch one way 6 Amp one module, front operated complete all as specified and directed.

S&F modular switch piano type flush button single pole 16 Amp one module, front operated.

S&F modular socket 6 Amp/16 Amp, 2/3 Pin multipurpose, 2 module, complete all as specified and directed.

S & F Fan regulator modular step type suitable for 1200/1400mm sweep ceiling fan hum free, 120W- 2 module including necessary connections complete all as spd and directed.

S&F ceiling rose PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals.

Supply and fix LED 2x2 recess mounted Slim panel 36/40watt, 6000K CCT having powder coated extruded aluminium body with high quality diffuser , separate driver, efficacy 100Lm/W, CRI>80 with 5700+/-300K CCT complete suitable for grid ceiling complete all as specified and directed.

S&F 20W surface / wall mounted box type batten LED luminaire, extruded aluminium housing with PC diffuser and integrated electronic driver with high efficiency long life luminous efficacy > 100 lumens/Watt, CRI>80 with 5700+/-300K CCT operating and voltage 140V-240V incl fixing on PVC square block complete with all accessories internally prewired and including connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and directed.

S&F Energy saving, surface mounted, bulk head LED luminaire 10 W with PDC aluminium housing and polycarbonate diffuser complete including connecting up with three core twisted flexible copper conductor cable of suitable sizeall as specified and directed.

S&F Decorative 10Watt 2feet long LED mirror light with driver and wall mounting arrangment and all as specified and directed.

Supply and Fixing surface mounted Decorative, upright fancy light fitting including for 9 W LED lamp and with decorative diffuser and mounting clips and lamp holder , wall mounting arrangment and all as specified and directed. Make-Philips model No 58184/ Havells model code LHFOAID1TZ1I040

S&F sheet metal enclosures double door VTPN MCB DB 4 way 415 V AC, 50 Hz with 250Amps rated copper bus bar complete with IP 43, IK-09 protection suitable for flush mounting into the wall incl MCCB 63Amps, 4P, 16kA breaking capacity with fixed magnetic and thermal setting of same make as of DB and making connection with cable by menas of suitable size of Al thimbles incl makin good the disturbed surface and matching with the existing surface specification complete all as specified and directed.

S & F in replacement SPN MCB DB 4 way sheet metal enclosures double door 230 V AC, 50 Hz AC having copper bus bar of rating 200Amps complete all as specified and directed.

S & F in replacement SPN MCB DB 2 way sheet metal enclosures double door 230 V AC, 50 Hz AC having copper bus bar of rating 200Amps complete all as specified and directed.

S&F MCB SP 240V, 50Hz, 10 KA,of rating 6 to 32 Amp all as specified and directed.

S&F in replacement MCB SPN 240V, 50Hz, 10 KA,of rating 32Amp all as specified and directed.

Supply and Fixing single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 20Amps with breaking cap 10kA complete all as specified and directed.

M&L for sub Main Wiring with two single core PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x4 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 4 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit complete and making good to disturbed surface of wall/floor with cement mortar and finishes to match existing surface all as specified and directed.

M&L for Supplying and fixing 6 Sqmm, 2 core 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, complete all as specified and directed.

Supply and fixing BEE 5 star rated ceiling fan 230 volts (BLDC),single phase of 1200mm sweep double bearing type including down rod, canopy cover etc and connecting with 3core flexible copper conductor of 0.50 sq mm and including writing of MES No with black enamelled paint as specified and directed.

S&F in ventilating fan of 250m sweep with louvers 230Volts AC including making square opening of suitable size on the wall and fixing the fan by means of suitable size of nuts incl connecting with 3core flexible copper conductor of 0.50 sq mm complete all as specified.

M&L for earthing complete with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in the ground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground level connected to galvanized iron strip of 32x6mm as earth lead by means of bolts, nuts and washers of GI up to test point, GI light grade pipe 40mm bore as protection pipe, GI watering pipe 20mm bore light grade with funnel and wire mesh, charcoal and salt, 40mm thick pre-cast RCC (1:2:4) type B-0 (Nominal mix) cover reinforced with XPM (weighing n.less than 4 Kg/Sqm) with suitable steel handle, and angle iron 40X40X3mm frame and chamber of PCC (1:3:6) type C-0 (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m) and connecting, testing on completion, all as shown on electric plate No. 03 of SSR-2009 Part-I, complete all as specified and directed.

M&L for laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sq mm 3.5core. laid under ground, fixed along wall, through GI pipe under floor/Road including dismantling existing service cable of any size from electric pole to building, complete all as specified and directed.

All as per Srl item No 176 here in before but for size 16 Sqmm 4 Core.

All as per Srl item No 176 here in before but for size 6 Sqmm 2 Core.

M & L for sand filling in trenches dry and and clean sand unwashed including punning around cable for protection of under ground cable complete all as specified and directed.

M & L for well burned bricks , laind flat ( old size) sub class B designation 75 for cable protection copmplete all as specifed and directed.

M & L for tube , light grade galvanised of 50 mm bore with all fittings laid in trenches/through wall / under road/floor or pole by means of FI clamps, nuts bolts and washers complete all as specified and directed.

S&F Decorative gate/garden light made up of high grade unbreakable polycarbonate material with collar for retrofit Lamp B22 base and incl LED lamp of 12Watt incl GI tubing of size 40/50mm dia light grade of length 90cm above the ground level and 30cm below GL including painting black with synthetic enamel paint and connecting up with three core twisted flexible copper conductor cable of suitable size including taking down old unsv light fitting complete all as specified. Make: Havells Model Code LHDC10115099 or equivalent in Bajaj/Crompton/wipro.

M&L for cement concrete 1:2:4 type C1 ( using 20mm graded stone aggregate ) in coping of poles studs including form work etc complete all as specified.

S&F House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos 90 0 bends. M.S. hook and stay fixed on wall with suitable size of clamps nuts and bolts complete all as specified and directed.

S&F heavy duty exhaust fan AC single phase 230/240 Volts of size 300mm sweep with louvre of metallic body with grouting nut bolts and making the suitable hole for 300mm sweep exhaust fan by breaking the existing wall and making good the disturbed surface by plastering to match with existing specification complete all as specified and directed.

Deduct Total amount of SCHEDUL 'A' SECTION-II (SCH OF CREDIT) Rs 1,13,276.00 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.

dadwal engineers

M/s Rajeev Vashist

s k construction co

Mahajan Enterprises