Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.8 LAccepted-AOC 63E SASHAN KALITALA ROAD KOLKATA 700 008 | KOLKATA | WEST BENGAL | 700008 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹26.4 L+₹1.0 L (4.10%)Rejected-Finance AKASHGANGA SUKANTA MARG MONIRAMPORE BARRACKPORE WEST BENGAL 700120 | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L2 | Rejected-Finance Being higher bid value | |
| 3 | L3₹26.5 L+₹1.1 L (4.33%)Rejected-Finance | L3 | Rejected-Finance Being higher bid value | |
| 4 | L4₹26.7 L+₹1.3 L (5.11%)Rejected-Finance 139 B B SEN ROAD CHANDANNAGAR HOOGHLY WEST BENGAL 712136 | CHANDANNAGAR | HOOGHLY | WEST BENGAL | 712136 | L4 | Rejected-Finance Being higher bid value | |
| 5 | L5₹26.7 L+₹1.4 L (5.38%)Rejected-Finance | L5 | Rejected-Finance Being higher bid value |
Tender Value
₹24.3 L
EMD Value
₹48,500
Closing Date
22 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ALIPORE KOLKATA
NO 1 NATIONAL LIBRARY AVENUE, ALIPORE, KOLKATA 700027
SPL REPAIR TO BLDG P-20 AND P- 21 AT TURF VIEW UNDER GE ALIPORE KOLKATA
2023_MES_583550_1
GE/ALP (8171B) OF KOLKATA 2022-23
Open Tender
Civil Works
Item Rate
120 days
GE ALIPORE
Class E and category a (i)
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER ALIPORE
₹48,500
Yes
GE ALIPORE
27 Mar 2023
1 Mar 2023
23 Mar 2023
1 Mar 2023
22 Mar 2023
15 Mar 2023
1 Mar 2023 - 8 Mar 2023
9 Mar 2023
Amount
Dismantling asbestos sheet (corrugated, semi-corrugated) in roof covering including ridges etc
Dismantling mild steel work of any description not otherwise provided etc complete all as specified and directed.
Taking down roof trusses above 4Mtrs and upto 8Mtrs, coupled rafters or trussed beams etc any position
Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position
Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed.
Demolition of Brickwork quoins,arches,pillars etc but excluding ashlar facings,dressed all store work and precast concrete articles built in cement mortar.
Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc.complete all as specified and as directed by the Engr-in-Charge.
Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal .
Taking up or down 20 mm steel tubing and connections, including cleaning for re-fixing or removal .
Taking down door shutter exe 1 Sqm and n exe 2 Sqm each after resecuring or easing and adjusting including refixing in same opening
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as per specified and as directed.
M & L for Double charged Virified Ceramic tiles coloured for Flooring in rooms 8 to 9mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over 15mm thick screed bed in CM (1:6) etc complete all as specified and as directed by Engineer-in-charge.
Ditto all as per above item No 12 here in before but on vertical surface such as skirting, dado, riser over a backing coat of 10 mm thick plaster in CM 1:3 complete all as specified and directed
M&L for Non-skid coloured ceramic floor tiles 7 to 8 mm thick area of each tile exc .11 sqm but n exc 0.16 sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement to to match the shade of tilesincluding and over 15mm thick screed bed in CM (1:6) etc complete all as specified and as directed by Engineer-in-charge.
M&L Glazed ceramic coloured wall tiles of size 450X300X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including backing coat/Screed bed or bedding layer of mortar 10 mm thick in cement mortar (1:4) as in dado/skirting complete all as specified and as directed by Engineer-in-charge.
M&L for brick work with sub class 'B' bricks built in cement mortar (1:6) straight or curved on plan exceeding 6 mtr mean radius and all as directed.
All as per Item No 16 above but except brick.
M&L for Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4).
M&L for Rendering 15mm thick in CM (1:6) on fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
M&L for Rendering 15mm thick in CM (1:4) on fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
Materials and labour for preparation of new plastered surfaces of wall and applying two coats of acrylic washable distemper over a coat of primer including a layer of wall care puty etc complete all as specified and as directed by the Engr-in-Charge
Complete removal of existing treatment and applying two coats of acrylic washable distemper over a coat of primer including a layer of wall care puty etc complete all as specified and as directed by the Engr-in-Charge
Preparing of new surfaces of walls and applying two coats of weather coat paint over one coat of alkali resistant primer with a layer wall care putty incl preparation surfaces complete all as specified and as directed by Engr-in-Charge.
Complete removal of old existing treatment and applying two coats of weather coat paint over one coat of alkali resistant primer with a layer wall care putty incl preparation surfaces complete all as specified and as directed by Engr-in-Charge.
Preparing of old surfaces of walls and applying one coats of weather coat paint over old surfaces of wall incl preparation surfaces by filling depresions through puty etc complete all as specified and as directed by Engr-in-Charge.
M&L preparation of old treated/decorative surfaces of wall by washing, rubbing down and stopping old painted surface and applying One coat of cement base paint etc all as specificed and directed.
M&L for cutting chases, pinning, in making good to facing where required of of brick wall and pointing in cement motrar 1:3 to ends and cutting chases for concealed water tubing and concealed conduit wiring ete and making good surfaces complete all as spfd and directed.
S&F for CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor, etc. complete all as specified.
S&F for CPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor. etc complete all as specified.
supply and fixing in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and as directed by Engineer-in-charge..
Supply & fixing in repair wash down water closet (pedestal pattern), white including connection to drain (or outgoing pipe) and to flush pipe etc. and making good the damaged surfaces complete all as specified and as directed by the Engr-in-Charge.
supply and fixing in repair PVC white water closet seat cover heavy duty coloured closed pattern with flat bottom and cover and mild steel CP hinnging device complete.
supply and fixing in repairs Vitreous China wash basin ( white), flat back, size 580 mm x 450 mm including CP waste coupling 32mm dia excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and as directed by Engineer-in-Charge.
supply and fixing in repair CP hand shower (faucet) with one meter flexible tube with wall hook complete all as specified and directed.
S&F in repair 15mm bore Brass CP angular stop cock concealed type with crutch or butterfly handle complete all as specified and as directed .
Supply and fixing in repair for 15mm bore Chromium Plated pillar tap fancy type cast copper alloy, with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed by the Engr-in-Charge.
supply and fixing in repair 32mm dia flexible PVC waste pipe for basin etc complete all as specified and as directed by engineer-in-charge.
S&F as in repair 15mm bore Brass CP bibcock fancy type with crutch or butterfly handle complete all as specified and as directed by Engineer-in-Charge.
S&F as in repair PVC connection 15 mm size pipe with PTMT nut of Length 600mm complete all as specified and as directed by Engineer-in-Charge.
S&F in repair CI Nahani trap with steel grating of 100mm dia, including jointing to waste pipe fixed in cement concrete, (1:2:4) type B1 ( using 20 mm graded crushed stone aggregate). .complete all as specified and as directed by Engineer-in-charge.
Supply and fixing Solid PVC Moulded Door Frame of size 50mm x 47mm made out of 5mm Moulded/printed PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing complete all as specified and as directed by Engineer-in-charge.
Supply and fixing factory made solid panel PVC Moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face supply and fixing in frame. complete all as specified and as directed.
S & F for Flush shutters, 40mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides etc, complete all as specified and directed.
S&F for 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast al alloy all as specified and as directed.
S&F 125 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engineer-in-charge.
S&F 125 mm long Aluminium handles, cast type, anodised complete all as specified and as directed by Engineer-in-charge.
S&F for 100 mm long Butt hinges, stainless steel hinge pin, anodised and fixed, type C-21complete all as specified and as directed by Engineer-in-charge.
M&L for PCC (1:4:8) Type E2 (using 40mm graded crushed stone aggregate) as in floor complete all as specified and as directed by Engineer-in-charge.
M & L for Chequered cement concrete tiles area of not exceeding 0.16 Sqm and tile 22 to 25 thick set, jointed and pointed in neat cement with greay cement and no pigments complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6) type C-1 using 20 mm graded stone agg as in floors complete all as specified and as directed.
M&L backing coat/Screed bed or bedding layer of mortar 20mm thick in cement mortar (1:6) as in floors complete all as specified and as directed by Engineer-in-charge.
M&L Machine cut kota stone slab flooring 18-20mm thick over 20mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by the Engr-in-Charge.
M&L for Granite slab 16-18 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, walls, window- cills, cooking platforms over screed bed/plaster 15 mm thick in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
Material and labour for Machine pressed precast concrete coloured interlocking paver block of any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with gray cement and pigment complete all as specified and directed.
Material and labour 50mm thick sand filling under interlock tile flooring complete all as specified & as directed.
M&L for 75mm thick PCC (1:3:6) type 'C-2' using 40 mm graded crushed stone aggregate as in plinth protection complete all as specified and directed.
Taking down chowkhat with shutter ( without taking down shutters from the frame) exc 1.5 sqm all as specified and directed.
Taking down door shutter exe 1sqm and n.exe 2sqm each.
S&F for Powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 80mmX25mmX1.55mm and shutter of section 20mm X20mm X1.55mm incl ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including taking down old steel windows with necessary all fittings complete all as per manufacturer's instructions and all as specified and as directed by the Engr-in-Charge.
Supplying and fixing Mild Steel framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, railings and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engineer-in-charge.
Material & labour preparation of new steel and iron surfaces of any description area exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide and zinc chrome primer, complete all as specified and as directed by Engineer-in-charge.
Material & labour preparation of old painted steel surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-charge.
Material & labour preparation of new painted wooden surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-charge.
Material & labour preparation of old painted wooden surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-charge.
Supply and fixing as in repairs 3.0 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer-in-charge.
M&L PCC (1:2:4) Type B0 (using 12.5mm graded crushed stone aggregate) for fixing hold fasts, angle etc.complete all as specified and as directed by Engineer-in-charge.
S&F for 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast al alloy all as specified and as directed.
S&F for Roof trusses (framed), trussed, purlins, Rafter, crane gantries, rails and fastenings and heavy bracket framing Fe-410W (Gde E-250) quality 'B' (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.
S &F prepainted galvalume aluminium zinc coating corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed by Engr-In-Charge.
S&F prepainted galvalume aluminium zinc coating plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof ridges /cladding to wall, fixed with self tapping screws as specified and completed as directed be Eng-In-Charge.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.
Material and labour for false ceiling with 4 mm thick high pressure steam curd (HPSC) Gypsum boards fixed over GI poweder coating white or framed work GI grid consisting of main Tee section of size (15mm x 30mm), cross Tee section of size (15mm x 23mm), and powder coating GI wall angle of size (20mm x 20mm) suitable for mounting tiles of 595 x595 mm with 1.5 mm dia GI wire suspended including fabrication complete as per manufacturers instructions fixed with steel rawl plug with nut and bolts arrengement with gred size 60 x 120 cm complete all as specified and as directed. by Enginer in charge.
Material and Labour for Providing plain cement concrete type B1 (1:2:4) (using 20mm graded stone aggregate) as in coping and the like including weathering, slightly rounded or chamferred angles and throating as complete all as specified and as directed.
Supply and fixing for mild steel TMT bars, 10mm dia, cut to length, bent to shape as required including cranking, bending and binding with mild steel wire (annealed)not less than 0.90 mm dia complete all as specified and directed.
Taking down carefully copper/aluminium point wiring (light,fan,socket etc.) complete including fittings such as switch, ceiling rose, light fittings, regulators etc. and making good to the disturbed surface of walls, floors etc. all complete as specified and directed.
M & L for concealed point wiring including necessary chase cutting of wall for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way modular switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistranded conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit of suitable size with all accessories and sunk cast pressed steel terminal box made out of MS sheet 1.25mm thick for mounting of fittings like switch, socket and fan regulator complete all as specified and as directed by . Note: Proper Colour code should be maintained.
All as per item No 76 here-in-before but for 3 pin 6 Amps socket outlet on the same board with 1.5 sqmm cable complete as specified and directed.
All as per item No 76 here-in-before but for 5 pin 6 Amps switch socket combination on the independent board with 1.5 sqmm cable complete as specified and directed.
All as per item No 2 here-in-before but for one 5 pin 6/16 Amps switch socket combination on independent board with2.5 Sqmm PVC insulated unsheathed copper cable multistrand conductor 1100 volts grade and 2.5 sqmm copper conductor cable as earth continuity conductor complete as directed.
Supply and fixing switch piano type 6 amps 230 volt single pole one way complete all as specified and as directed by the Engr-in-Charge.
Supply and fix socket outlet 3 pin, 6A, 230 volt, flush type complete all as specified and as directed.
Supply and fix switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal complete all as specified and as directed.
Supply and fix ceiling rose surface bakelite three terminal 65 x 50mm complete all as specified and as directed by the Engr-in-Charge.
S & F eletronics fan regulator step type 120W-2 module AC 240 volt 50 Hz complete all as specified and directed by the Engr-in-Charge.
Taking down ceiling fan/exhaust fan, cable end,dismantling blades and removing fan and blades to store to keep it in safe custody for refixing/reparing.
Repair to Ceiling Fan by rewinding with synthetic enamel copper wire including insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished, replacement of Capacitor/ball bearing/ bush etc and complete all as specified and as directed.
Repair to Exhaust Fan by rewinding with synthetic enamel copper wire including insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished, replacement of Capacitor/ball bearing/ bush etc and complete all as specified and as directed.
M & L for Painting of ceiling fans/Ext fan complete, with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc of any type of fan incl replacement of canopy and flexible cord.
Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
Supply and fixing in repair MCB DB SPN 8 ways double door, IP43, including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge. (Make : HPL Cat no MDBECOTDD08 or equivalent as approved by the GE).
Supply and fixing in repair MCB DB SPN 4 ways double door, IP43, including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge. (Make : HPL Cat no MDBECOTDD08 or equivalent as approved by the GE).
Supply and fixing in repair MCB 40 Amps to 63 Amps, SPN, 240 Volt "B" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge. (Make : C&S /Legrand/ Havells/L&T.)
Supply and fixing in repair MCB 06 Amps to 32 Amps, single pole, 240 Volt "B" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge. (Make : C&S /Legrand/ Havells/L&T.)
Taking down unserviceable sub main wiring any size including conduit/ casing caping and making good to the disturbed surface complete all as specified and directed.
M&L for Sub main wiring 2 x 4 Sqmm multi-strand PVC insulated copper conductor unsheathed cable including concealed conduit and continuous earth wire of PVC insulated multi-strand copper conductor of size 4.0 sqmm complete all as specified and directed. Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.
Supply and fix sub-main wiring including casing capingl for main DB's to Sub DB's with PVC insulated & unsheathed two run of 6 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 6 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through PVC casing caping ofsuitable size after and including taking down existing one complete all as specified and as directed. Note :1. Two runs of 6 Sqmm and one run of 6 Sqmm cableand one un of casing caping shall measured as one lengthand proper colour coding also. 2. Proper Colour coding to be maintained.
Materials and labour for earthing as in repair complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 32 x 6mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50 mm thick precast RCC (1:2:4) cover slab (re-inforced with 8 mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed by the Engr-in-Charge.
S & F in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
SREE GURU CONSTRUCTION CO
R.R.ENTERPRISE
CHATTERJEE CONSTRUCTION
PUTUL CONSTRUCTION CO.
NUPUR CONSTRUCTION
SOVA ENTERPRISE
GAYATRI ENTERPRISE
RADHA ENTERPRISE
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .