CA NO CWE/PAT/T-53/2022-23 SPECIAL REPAIR TO BLDG NO P 10 AT PATIALA MIL STN UNDER GE NORTH PATIALA

Amount

Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Rendering 15mm thick in cement mortar 1:4 including mixing of liquid water proofing compound of approved make as per manufacturer's instructions on fair faces of brick work or concrete surfaces or in chajjas / parapet walls etc finished even and fair without using extra cement complete all as specified and as directed. Note : WPC will be measured and paid separately.

Rendering 10mm thick in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Complete removal of existing treatment of any type / description from internal /external surface of wall with mechanical mesns/grinder including removal of material from site complete all as specified and as direrected .

Preparation of new plastered surfcace of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Preparation of new plastered surfcace of walls , and applying two coats of distemper oil emulsion over a coat of chalk whiting priming paint complete all as specified and as directed.

Complete removal of existing treatment of any type / description of ceiling with mechanical mesns/grinder including removal of material from site complete all as specified and as direrected .

Supply only Liquid water proofing compound complete all as specified and as directed.

Rendering 5mm thick in cement mortar 1:3 as on concrete surface in ceiling finished even and smooth without using extra cement complete all as specified and as directed.

Preparation of new plastered surface applying three coat of white wash on ceiling complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins , arches, pillar etc complete all as specified and as directed.

Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 compete all as specified and as directed.

Taking down chowkhats or frames ( without taking off shutters from the frame) not exc 1.5 sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and as directed.

Taking down chowkhats or frames ( without taking off shutters from the frame) exc 1.5 sqm and n. exc 4.00 sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and as directed.

Powder coated Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Powder coated Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc. of size 125 x 60mm incl cutting holes and making good required shape for hold fast block for new frame complete all as specified and as directed.

Plain Cement Concrete 1:3:6 type C-0 using 12.5 mm graded mechanically crushed stone aggregate as in back filling of pressed steel frame / hold fast block etc and similar compelete all as specified and as directed.

Supply & fixed 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified.

30mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass/guage etc size of members of shutter as specified in SSR-1 section 8 clause 8.24(a), kiln seasoned and chemically pressure treated all as specified and as directed.

Aluminium anodised barrel tower bolt 200 mm long extruded section and fixed complete all as specified and as directed.

Aluminium anodised barrel tower bolt 100 mm long extruded section and fixed complete all as specified and as directed.

Aluminium anodised sliding door bolt of size 250mm, with hasp and staple extruded with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts complete all as specified and as directed.

Extruded aluminum alloy handles 150mm size fabricated type, anodised complete all as specified and as directed.

Extruded aluminum alloy handles 100 mm size fabricated type, anodised complete all as specified and as directed.

Stainless Steel butt hinges of size 100 mm medium weight cold rolled fixed in repairs including all necessary welding etc complete all as specified and as directed.

Mild Steel, 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.

PPGI Windows and ventilators including frame and shutter with standard accessories, EPDM gasket, and fixing arrangements for glazing and wire cloth complete all as specified and as directed.

4mm thick sheet glass ordinary quality in square not exceeding 0.5 sqm in each pane complete all as specified and as directed. .

Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 of round/square bar of 10 mm all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail,Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube , fixed in opening as per specification and drawing complete all as specified and as directed.

S&F 100mm butt hinges, extrude aluminum alloy with galvanised mild steel hinge pin , anodised and fixed all as specified and as directed.

Preparing of new surface of wood and wood based material of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors/FF and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed..

Dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Coloured Ceramic tiles 7-8 mm thick area of each tile exceding 0.18 Sqm but not exceding 0.38 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed with polymer modified cement based tile adhesive of average thickness 6mm complete all as specified and as directed.

Coloured Ceramic tiles 7-8 mm thick area of each tile exceding 0.18 Sqm but not exceding 0.38 Sqm in vertical surfaces/skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick back coat in CM 1:4 complete all as specified and as directed.

Non skid ceramic (coloured tiles) of 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm screed bed in C M 1:4 complete all as specified and directed

Glazed ceramic tiles 200 x 300mm x 7mm thick coloured on vertical surfaces set and jointed in neat cement slurry and pointed in white cement to match including 10 mm thick rendering of CM 1:4 complete all as specified and as directed.

Health Faucet (ABS Body) with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F in repair Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and as directed.

Taking up or down steel tubing of size 15mm bore and removal to store complete all as specified and as directed.

Taking up or down steel tubing of size 20 mm bore and removal to store complete all as specified and as directed.

Supply and laying of 15mm outer dia CPVC pipes SDR11 & plain CPVC SDR 11 fitting fixed on wall / celling or laying in floor complete all as specified and as directed.

Supply and laying of 20mm outer dia CPVC pipes SDR11 & plain CPVC SDR 11 fitting fixed on wall / celling or laying in floor complete all as specified and as directed.

S&F in repair mild steel chromium plated 20mm curtain rod with fixing brackets, stops rollers complete including fixing brackets, stop etc all as specified and as directed .( Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered)

Dismanting of brick tiles or terracing tile single layer on roof complete all as specified and as directed.

Demolition of mud puska on roof any thickness and rubbish off the premises not exc. 50 mtr and deposting where directed at a level n. exc. 1.50m above the starting point complete all as specified and as directed.

Roughening surface of old concrete floor by picking , sweeping cleaning and washing down with water to remove dust etc complete all as specified and as directed..

PCC 1:2:4 type B-0 using 12.5mm graded stone aggretgate, as in padding roof maintaining the required slope and finished even and smooth on exposed concrete surface without using extra cement complete all as specified and as directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

Roof treatment with polymeric water proofing membrane to roof with the following courses as under complete all as specified :- (a) Cleaning surface by wire brushing,brooming, removing dust complete and make the surface even and smooth. (b) Applying a coat of bitumen primer conforming to IS-3384 - 1965 @ 0.40 lit/Sqm and allow to dry. (c) Applying one coat of hot blown bitumen grade 85/25 as per IS-702-1988 @ 1.20 Kg/Sqm of each coat applied over primer incl cleaning of surfaces . (d) Supply and laying 3mm thick polymeric water proofing membrane weight not less than 3.6 Kg/Sqm with nonwoven polyester fabric weight not less than 160 gms/sqm over area including overlapping of 100mm(min) as per manufacturers instruction.then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (Note :- (i) Laying APP bassed polymenic membrane shall be done torch on methed or as per manufacturer's instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer's instruction. NOTE: The complete work shall be done under strict supervision of manufacturers technical representative and as directed.

Factory made PCC tiles of size 250x250x20-22mm thick machine pressed set and jointed in neat cement slurry over roof surface cut and polished with grey cement and no pigment over 15mmm thick cement mortar 1:3 bedding and joints grout filled in cement mortar 1:3 mixed with integral water proofing compound complete all as specified and as directed.

Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and as directed.

S&F in repair PVC (SWR) rain water pipes 110 mm bore single socketed in any length with rubber ring joint fixed to the wall complete all as per specified including flat iron clamp 25x3mm and taking out old damaged AC rain water pipes complete all as specified and as directed.

S&F in repair PVC (SWR) bends of any radius with access door for 110mm dia rain water pipes with rubber ring joints complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks cylindercial vertical with closed top 500 lts capacity hoisted and fixed in position including 20 mm bore ball brass valve high pressurre with polythene float and fly nut complete including dismantling old tank of any description all as specified and as directed.

S&F in repair 50 mm brass chromium plate shower rose with arms complete all as specified and as directed. .

S&F in repair Bib tabs 15 mm dia pipe, cast coper alloy cromium plated with capstain head screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repair Pillar taps 15 mm Bore dia cast copper alloy with capstan heads cromium plated screwed down high pressure with or without lettered 'HOT' or COLD with long screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair Stop valves, fancy type, CP with long shank and cup ( concealed typee ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete all as specified and as directed.

S & F in repair Stop cock cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore pipe complete all as specified and as directed.

S&F in repair 15 mm dia Stop cock cast copper alloy fancy type CP with long shank and cup (concealed type) , screw down high pressure, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.

S&F 450 mm long PVC connections with brass nuts on both ends for 15m bore pipes of approved quality complete all as specified and as directed.

S&Fin repair Vitreous china wash hand basin, white, flat black, size 450 x 300mm, including PVC waste pipe 32mm bore and mild steel brackets, incl. cutting for or pinning in brackts complete all as specified and as directed.

S&F in repairs tubular towel rail CP 20mm dia 60 mm long between flanges complete all as specified and as directed.

S&F in repair Stainless steel sink with drainage board1.00 mm thick for kitchen with plugs washers and waste pipe of 40mm dia PVC west pipe incl new fittings upto floor trap,CP waste fitting and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460 mm with bowl size 410mm x 330mm x 160mm including making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and as directed.

S&F in repairs low level flushing cistern of 10 litres capacity, including 45cm long PVC connection with brass nut at both ends, 15 dia stop cock cast copper alloy, screwed both ends , high pressure (wt. not less than as specified in SSR ), PVC flush pipe 32 mm bore complete all as specified and as directed.

S&F in repair viterous china ware wash down water closet Orrisa pattern size 580x440mm white with integral foot rest including connection to traps and to flushing pipe, anti syphonage pipe complete all as specified and as directed.

S&F in repair viterous china wash down water closet pan ( pedestal pattern ) white including white plastic seat cover with mild steel CP hinging device, jointing connection and making good the distrubed surface complete all as specified and as directed.

Cement concrete 1:3:6, type C-2 (using 40 mm graded aggregate) 50 mm thick as in path, plinth protection finished the surface even and smooth without using extra cement complete all as specified and as directed.

Demolition of reinforced cement concrete of any description (reinforecement cut as required to facilitate demolition ) complete all as specified and as directed.

M&L Precast reinforced cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM (1:4) in cover slabs for manholes etc.duly embossed MES MONTH & YEAR of casting including necessary formwork complete all as specified and as directed.

TMT bars 6 -8 mm dia and over mild steel as in reinforcement , cut to length bend to shape required including cracking and bending with MS wire ( anealed ) not less than 0.9 mm dia or securing with clips all as specified and as directed.

Marble work 18 to 20 mm thick (of any type ) work (table rubbed and polished ) in steps , jambs, pillars, window-cill , cooking platforms and like in white cement with admixture of pigment to match with shade including grinding and polishing, laid over 15 mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and as directed.

Machine cut kota stone slab as in flooring 20 mm (+2) mm thick laid over and incl. 20 mm thick screed bed or bedding layers in CM 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and polishing complete all as specified and as directed.

M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggretgate, as in base for PVC tanks complete all as specified and directed.

M&L for 100mm thick cement concrete work 1:4:8 type D-2 in sub-case to flooring etc complete all as specified and as directed.

S&F in replacement cast iron pipe sand cast waste and vent pipe in any length with or without ears with cement joint laid in trenches or in floor of 100mm bore with sand cast paper all as specified and as directed.

S&F in replacement cast iron pipe sand cast waste and vent pipe in any length with or without ears with cement joint laid in trenches or in floor of 75mm bore with sand cast paper all as specified and as directed.

S&F in replacement CI cowl of 100mm dia complete all as specified and as directed

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay) and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L cast iron nahani/floor/multifloor trap 100 mm dia including jointing with solvent cement in repair fixed in cement concrete (1:2:4) type B1 complete all as specified and as directed.

S&F in replacement 100 mm bore cast iron bends ( any radius ), diminishing pieces or tapers (larger bore measured ) complete all as specified and as directed.

S&F in replacement Cast Iron 100 mm branch pieces, double/cross, T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branch complete all as specified and as directed.

Salt glazed stone-ware gully traps,Centrifugal type 150 x 150mm size , square or roundmouthed, type 'P' or 'S' incl CI grating fixed in repair complete all as specified and as directed.

S&F in repair 18 mm thick with minimum density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets as per manufacturer’s specifications complete all as specified and as directed.

S &F in repair 18 mm thick with minimum density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminated of approved colour and other side plain white colour fixed with screws and solvent cement/ adhesive to make kitchen cabinet shutter and shelves complete as per manufacturer’s specifications complete all as specified and as directed.

S&F Auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respected and fixed in position all as specified and as directed.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified and as directed.

S&F tower bolts 150mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished fixed in position complete all as specified and as directed.

S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required size fixed in position complete all as specified.

S&F Stainless Steel 304 grade basket cutlery of size 370x485 mm permium quality complete fixed in position complete all as specified.

S&F wardrobe tube/hanging rod for CB of size dia 18mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturer's instructions all as specified.

Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.

Plain cement concrete 1:7:12 mix, type E-2 (using 40mm graded Brick aggregate) as in filling of sunken portion complete all as specified and as directed.

Rendering 15 mm thick in cement mortar 1:3 , mixed with water proofing compound, on brick or concrete surfaces of wall of sunken portion, trowelled to even and fair finish without using extra cement mixed with WPC complete all as specified and as directed. Note : WPC will be measured and paid separately.

Applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as manufacturer,s instruction and providing 200 micron thick polythee flim over 85/25 grade bitumen layer @ 0.5 kg /sqm all as specified and as directed.

Gun metal globe or gate valves of 25 mm dia with iron wheel head screwed both ends for iron and fixed in repair complete all as specified and as directed.

Gun metal globe or gate valves of 20 mm dia with iron wheel head screwed both ends for iron and fixed in repair complete all as specified and as directed.

Stainless steel grating 150x150mm size square shaped with cockroach trap for floor trap fixed in position in repair complete all as specified and as directed.

M&L for machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS : 15658-2006 of 60 mm thickness, M-35 grade with 6mm top layer of anti abrasive material, including filling of interstices with fine sand laid over and including 25 mm thick (compacted) fine sieved sand cushioning complete all as specified and as directed.

Taking down carefully existing points wiring on surface conduit/concealed conduit for light/ fan/socket /power/ bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, light fittings, peace of wires,gutties, conduit, wooden boards etc and making good the disturbed portion of all floor, ceiling etc complete all as specified and as directed.

M & L for point wiring with 1.5 sqmm copper conductor cable (multistrand) FRLS single core PVC insulated cable for one light / fan point in existing conduit terminated in sunken / pressed metal flush box with and including modular cover plate with frame for mounting of switches / sockets / fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light / fan / sockets point all as specified and as directed. (Note : (i) Eye / bottle thimbles shall be used for connection in switches / sockets and MCB's in DB's without any extra cost. (ii) Electric rewiring should be done in proper colour coding i.e Red for phase, Black for neutral and Green for Earth. (iii) Necessary cutting chasing including replacement of defective concealed conduit wherever required and making good the disturbed surface shall be part of job at no extra cost.

All as per Sl item No 107 here in before but for light point controlled by two 2 way switch complete all as specified and as directed.

All as per Sl item No 107 here in before but for one 5Amp socket point on independet board complete all as specified and as directed.

All as per Sl item No 107 here in before but for one 5pin 5Amp socket point on same board but with other switches complete all as specified and as directed.

All as per Sl item No 107 here in before but for one 15 Amp Socket outlet independent with 2.50 Sqmm (Nominal cross sectional area) FRLSH PVC insulated and unsheathed 1100 volts grade multi stranded copper conductor single core cable for phase, neutral and earth complete all as specified and as directed.

S&F in replacement Sub Main Wiring with two run of 6.0 Sqmm (Nominal cross sectional area) FRLSH PVC insulated and unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through existing conduit complete including one run of FRLSH PVC insulated and unsheathed single core multistranded copper conductor cable of size 6.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly for main DB to Sub DB and for AC complete all as specified and as directed. Note : Two run of main cable and one run of earth wire shall be measured as one unit i.e 01 Running Metre for Payment Purpose.

Modular Switch 1 way 6A 1module type complete all as specified and as directed.

Modular Switch type, 6 Amp, 240 Volts, 2 way complete all as specified and as directed.

Modular switch type, 16 Amp, 240 Volts, 1 way complete all as specified and as directed.

Socket outlet modular type, 5 Pin, 6 Amp, 2 module complete all as specified and as directed.

Socket outlet modular type, 5 Pin, 6 & 16 Amp, 2 Module complete all as specified and as directed.

Modular Bell switch 1 way , 6 amps , 1 module complete all as specified and as directed.

Fan regulator 120 W modular type 2 module complete all as specified and as directed.

Ceiling rose surface bakelite surface 65x50 mm 3 treminals all as specified and as directed.

Un reinforced pre cast concrete cable covers conforming to IS-5820-1970, class LV, type 1 flat of size 250mm x 140mm x 40mm laid in trenches as protection to cables complete all as specified and as directed.

Supply & fix in replacement surface mounted LED Bulk head off white luminaire of cap 10 W with ABS body & polycarbonate diffuser, IP54 INC. connection, with flexible wire 0.5 sqmm copper cable all as specified and as directed. Make : Cat Part No HEXAFT10WLED857SSYMBOPC of Havells or equaivalent in makes as per Appendix 'B'.

Supply & fix in replacement lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting with and including LED bulb 9 W 230 volt retrofit type complete all as specified and as directed.

S&F in replacement bell ding dong operating on AC 230 V single pahse complete all as specified and as directed.

S & F New generation energy saving and environmental friendly long life LED building security light 1 x 25Watt made up of pressure diecast aluminium housing with high power LED as light source and lense embeddd PC cover having top opening separate driver compartment with IP 65 protection and impact resistance of IK07 with all accessories and suitable bracket with 32mm bore light grade GI pipe bend to shape with necessary clamps of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and as directed.

S&F MCCB 4 pole, 63A, 16kA for fixing in DB including proper thimble connection, thermal and magnetic release protection complete all as specified and as directed .

S&F MCB TPN 40 Amp, 16kA, 415 Volt complete all as specified and as directed .

S&F MCB SPN 32-40 Amp 240 Volt, 'B' curve, 10 KA complete all as specified and as directed .

MCB, SP, 240 V, 6-32 Amp 'B' curve for fixing in DBs including proper thimble connection complete all as specified and as directed.

Supply and laying XLPE/PVC insulated armoured and sheathed LT 1100 volts grade with aluminium conductor of size 25 Sqmm 3½ core complete including taking out old unserviceable cable complete all as specified and as directed.

Supply and laying XLPE/PVC insulated armoured and sheathed LT 1100 volts grade with aluminium conductor of size 10 Sqmm 4 core complete including taking out old unserviceable cable complete all as specified and as directed.

Excavation in trenches n exc. 1.5 m wide and n. exc. 1.5 m in depth getting out in soft / loose soil complete all as specified and as directed.

Returning filling in including spreading , levelling, and well ramming in layer n exc. 25 cm each layer of any kind of soil complete all as specified and as directed.

Removing surplus excavated material from site n. exc. 50 m from starting point and deposting where directed at level not exc. 1.5 m avobe the starting point complete all as specified and as directed.

Sand cushioning (dry sand) to underground cable for cable protection 23 cm thick in two layers (8 cm thick before laying of cables and 15 cm thick after laying the cable and punning down the sand to 18 cm thickness complete all as specified and as directed. (Note:- Only punned thickness 18 cm of sand shall be measured for payment purpos).

S&F epoxy power coated MCCB distribution box double door VTPN 4 way vertical type AC 415 V with IP54 protection for MCBs alongwith provision of MCCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted/flush to wall, complete all as specified by Engineer-in-charge. Note . (i) MCCB will be measured and paid under separate item (ii) Cost of Eye/bottle thimbles used for connection MCBs in DB shall deemed o be included in the quoted rates (iii) Electric wiring colour code norms to follow strictly (iv) Connection of MCCBs/MCBs with cable shall be made through appropriate size pin/bottle type thimble-properly crimped. All the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly with digre of protection IP-54 & PU gasket of mechanical perfect IKO9

Material and labour in replacement of GI tubing light grade 40 mm bore for passing through cables under the foor , along the wall or along the pole complete all as specified and as directed.

M&L earthing with galvanised steel plate earth electrode 60cmx60cmx6mm thick, burried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of earth plate not less than 1.5 Mtr below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolt, nut check nuts and washer of galvanised iron or steel with protection of GI, medium grade 15mm bore upto adequate length watering pipe 20mm bore GI common solt 15cm thick all as per electrical plate No 5SSR Part-I and connected to earthing test point and testing on completion including PCC 1:3:6 type C-2 using 40mm graded stone aggregate CI cover and frame including all excavation earth work etc and taking out serviceable materials from old earthings complete all as specified and as directed.

Supply and fix Sheet Metal enclosure DB TPN 4 ways double door 415 volts with 200 Amps standard bus bar of suitable size and common neutral link flush mounting type, drilling holes for incoming and outgoing cables complete all as specified and as directed.

Supply and fix Sheet Metal enclosure 8 ways double door for DBs when MCBs are to be used 240V including 200 Amps standard bus bar of suitable size and common neutral link flush mounting type, drilling holes for incoming and outgoing cables with IP43 protection complete all as specified and as directed.

Supply and fix Tube light fittings Self ballasted LED batten, extruded thermoplastic body with PC diffuser in square LED battern 20W 6500K of capacity ,4 feet long incl 3 core flexible wire 0.5sqmm copper cable complete all as specified and as directed.

Supply and fix Tube light fittings Self ballasted LED batten, extruded thermoplastic body with PC diffuser in square LED battern 10W 6500K of capacity ,2 feet long incl 3 core flexible wire 0.5sqmm copper cable complete all as specified and as directed.

Cutting of hardstanding in floor for laying of cable including matching with surface by using cement concrete 1:2:4, type B1 complete all as specified and as directed.

Taking down ceiling fan, Exhaust fan & geysers and refixinng after necessary overhauling, cleaning, painting and making serial number complete all as specified and as directed. Note : Taking down items will be deposited to MES storeyard and make proper record prior to refixing

S&F ceiling fan complete with all accessories 230 V, 1200mm sweep complete all as specified and directed.

HG construction

DELTA CONSTRUCTION CO

M/S RAJ KUMAR GUPTA

FAVOURITE ENGINEERS