Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹33.2 L+₹1.2 L (3.90%)Rejected-Finance | L2 | Rejected-Finance HIGHER | |
| 3 | L3₹34.8 L+₹2.9 L (9.15%)Rejected-Finance | L3 | Rejected-Finance HIGHER | |
| 4 | L4₹35.6 L+₹3.6 L (11.4%)Rejected-Finance RIDMALSAR PUROHITAN BIKANER RAJASTHAN 334022 | BIKANER | RAJASTHAN | 334022 | L4 | Rejected-Finance HIGHER | |
| 5 | L5₹35.9 L+₹4.0 L (12.4%)Rejected-Finance | L5 | Rejected-Finance HIGHER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
5 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Amritsar
GE Amritsar pin 143001
CERTAIN REPAIRS TO JOINERY UNDER AGE BR-II AT AMRITSAR CANTT
2023_MES_617743_1
GE/ASR-37/2023-24
Open Tender
Civil Works
Works
180 days
GE Amritsar
class D category a i
8 documents required · 8 mandatory
₹500
GE Amritsar
₹90,000
20 Sept 2024
8 Sept 2023
6 Oct 2023
8 Sept 2023
5 Oct 2023
22 Sept 2023
Amount
Taking down chowkhats or frames with shutter’s (without taking off shutter’s from frame) nxc 1.50 sqm each ; Complete all as specified and directed by Engineer-in-charge.
Taking down chowkhats or frames with shutter’s (without taking off shutter’s from frame) exc 1.50 Sqm & nxc 4.00 Sqm each (as in doors) ; Complete all as specified and directed by Engineer-in-charge.
Taking down shutters of any description exc 1 Sqm but nexc 2 Sqm each ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for welding in repairs exc 2.5cm but nexc 5cm in length ; with thickness of metal to be welded n.exc 6mm ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete FE -290 Gde E-165 ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 1.00 mm thick back sheet in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required; Complete all as specified and directed by Engineer-in-charge.
Supply and fixing factory made PVC Internal door frame of size 100 mm x 45 mm with a wall thickness of 5 mm (+0.25) , made out of extruded 5 mm (+0.25) thick PVC sheet manufactured by asn ISO - 9001-2008 certified company, and by joining 3 Nos heat bent PVC sheet sections. The inside section of size 90 x 30mm shall be made from plain colour PVC sheet of 5 mm (+0.25) thickness. The inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from 5 mm (+0.25) thick plain PVC sheet. The frame shall be mitre cut at two corners and oined with 4 Nos of 150 mm long brackets of 15 mm x 15 mm square tube . The two vertical door frames are to be reinforced with 40mm x 20mm MS tube of 19 guage through out the frame . The door frame whslla be fixed to the wall using 8/100 mm long MS Screws through thee frame by using anchor fasteners. A minimum of 4 Nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc as per manufacturer's specification, ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for Providing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER - WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles as well as top, bottoMaterial and Labourock rail. M.S frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick multichamber hollow PVC section of 1 mm wall thickness, bonded using solvent cement / eynoacrylate adhesive with 5mm (+0.25) thick moulded PVC sheet of Density 600 Kg/Cbm Manufactured by an ISO-9001-2015 certified company with 2, 4, 6 raised panel design in plain/prelam colours after routing the moulded design on one side of the inside panel, 5mm (+0.25) plain/prelam PVC sheet to be pasted using solvent cement / cynoacrylate adensive on other side of the Hollow PVC section. All the four edge of the panel to be sealed with lipping of 10mm thick & 20mm wide PVC sheet baton (Made by sticking 02 Nos. foam PVC sheets of 5mm (+0.25) thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain / prelam mouded PVC sheet of door. 20mm thick (5mm x 4 Nos) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos. stainless steel but hinges of size 100mm *25mm*2mm and 50mm longsteel screws drilled suitable to pass through both the walls of M.S tube. other hardwares should be fixed with 25mm*8mm size steel screws etc, complete as per direction of Engineer-in-Charge, manufacturer's specification and drawing.
Material and Labour 30mm thick Glazed and skeleton shutter of Second class hard wood , open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauge etc size of members of shutters as specified in SSR part-I Section 8 and clause 8.24(a) of second class hard wood ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for Box type steel window made of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame, comprises glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1020/08 Sh 1/3 to 3/3 dt 01 May 2008 ; Complete all as specified and directed by Engineer-in-charge..(a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window.(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf.(c) MS tower bolt 150mm long - 02 Nos/leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf.(e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf.(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf Note :- MS guard bars, sheet glass wire mesh and painting shall be measured and paid sperately
Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 ; Complete all as specified and directed by Engineer-in-charge.. NOTE : , Guard bar, Sheet glass and painting shall be measured and paid Separately.
Supply and Fixing 35 mm thick flush shutter, soild core construction, with block board core and plywood face panel commercial type on both sides ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing IInd class hard wood plain framed, panelled shutter 35 mm thick (any number of panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treate ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing framed work such as grill, framed guard bar and similer work conforming to FE 290, GDE E- 165 ; Complete all as specified and directed by Engineer-in-charge.
Supply and fixing aluminium chowkat powder coated of size as directed according to site requirement for door and windows ; Complete all as specified and directed by Engineer-in-charge.
Supply and fixing aluminium powder coated glazed shutter(for doors) with style and top rail of section 80 x 44mm, 16 Gauge thick and bottom rails of section 112 x 44mm of 14 Gauge thick, middle rail 150 x 44mm of 16 guage thick fixed on floor spring, both side opeining without sash bars but including 5mm thick glass pan with 5 micron thick black film and necessary jointing cleats, rubber beading, anodized aluminium snap beading, screws, aluminium anodized handle, locking arrangement(mortised) and aluminuium anodised tower bolt 200 mm Note :- Floor spring shall be measured and paid separately.; Complete all as specified and directed by Engineer-in-charge.
Supply and fixing aluminium powder coated shutter (for window and ventilator) with style, top and bottom rail of section 44 x 44mm of 14 Gauge thick side hung type, without sash bars including 5mm thick glass panes with 5 micronthick black sheet and necessary jointing cleats, rubber beading, aluminium anodized snap beading , scews, aluminium anodized fitting such as peg stay150mm long,butt hinges 100mm, tower bolt 100mm and handle etc ; Complete all as specified and directed by Engineer-in-charge.
Supply and fixing 5.5 mm thick sheet glass ordinary quality in squares exc 0.50 Sqm in each panes including rubber packing and aluminium beading with and including solar control film 25 Micron reflective type stuck to glass panes as per instruction of manufactures ; Complete all as specified and directed by Engineer-in-charge.
Supply and fixing aluminium door closer hydraulically regulated designation No 3 universal type suitable for door shutter of 861 to 1000 mm in width and of weight between 61 to 80 kg and fixed ; Complete all as specified and directed by Engineer-in-charge.
Supply and fixing double action floor spring hydraulically regulated made up of 1.25mm thick alluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of steel ; Complete all as specified and directed by Engineer-in-charge.
Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples ; Complete all as specified and directed by Engineer-in-charge.
Supply and fixing in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples ; Complete all as specified and directed by Engineer-in-charge.
Hacking out old broken glass any thickness, size, quality or description from wooden frames or metal frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads ; Complete all as specified and directed by Engineer-in-charge.
Supply and fixing 3mm thick ordinary sheet glass and glazing with oil putty or fixed with wooden beading, in squares not exc 0.50 Sqm in each panes ; Complete all as specified and directed by Engineer-in-charge.
Supply and fixing 3mm thich figured glass pin head type and glazing with oil putty in squares not exc 0.50sqm in each pane ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 150 mm aluminum , anodised, barrel tower bolts of extruded section ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing butt hinges 100mm size medium weight cold rolled mild steel, fixed with screws or welded to steel frame ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 150 mm aluminum Handle Cast type ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 250mm aluminum alloy, anodised , sliding door bolt with hasp and staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing M.S. 300mm ordinary rat tail rod pattern spring including roller and roller plate complete including necessary welding to door frame; Complete all as specified and directed by Engineer-in-charge.
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish off premises ; Complete all as specified and directed by Engineer-in-charge.
Supply and fixing Glazed cermic coloured tiles 450mm x 300mmx 7mm /300mmx300mmx7mm thick on vertical surfaces of walls such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 10 mm thick bedding layer of cement mortar 1:4 ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 75 mm aluminium 2 lever Mortice lock, vertical type ; Complete all as specified and directed by Engineer-in-charge.
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for brick work using sub class ‘B’ bricks, straight or corved on plan exc. 6 mean radius in CM 1:6 ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for brick work but except bricks (bricks obtained from the demolition shall be reused ) in CM 1:6 ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with CM (1:6) finished the surface for even and smooth without using extra cement ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for rendering 15mm thick on other than fair face of brick works or concrete surfaces of walls with CM (1:4) finished the surface for even and smooth or all as per manufacturing instruction ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for preparation of new steel surface and applying two coat of synthetic enamel paint over one coat of red oxide primer on new surface ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for preparation of new wood surface over 10 cm girth or width and apply two coat synthetic enamel paint over a coat of pink primer ; Complete all as specified and directed by Engineer-in-charge.
Material and labour for cup board shutter, frame made of angle iron 35x35x6mm, covered with 1.00mm thick MS sheet, welded to frame including suitable handle, lugs and locking arrangement ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing PVC sheet 5mm thick, in backside of kitchen cabinets for support ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing PVC board 18mm thick, in cupboard shelves and backside (for hanging) kitchen cabinet etc ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing solid PVC shutter 18mm thick with one side prelam of any shade plain colour as in cup board, kitchen cabinet shutter etc.; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 40mm long box type steel hinges spring action type ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 75-80mm long stainless steel handle ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for providing PCC 1:2:4 type B-1 ( using 20 mm graded stone aggregate ) for fixing of hold fast ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for preparation of new plastering surfaces of walls and applying two coat of cement base paint over a coat of primer etc.; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for two coat of oil bound distemper over a coat of primer on newly plastered surface of wall incl preparation of surface ; Complete all as specified and directed by Engineer-in-charge.
M/s. M Company
Saini Constructions
S S CONSTRUCTION COMPANY
ESS KAY BUILDER
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .