COMPREHENSIVE REPLACEMENT AND RENEWABLE OF UNSV WIRING AND INTERNAL ILLUMINATION FIXTURE IN BUILDING AND OTHER CONNECTED E/M WORKS IN MAP QTRS, W-WING, BHAGAT ENCLAVE AND ADJOINING AREA UNDER GE BABINA CANTT

Amount

Taking down carefully aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power ) complete,including fixture and fitting such as switches,ceiling roses,pendents,regulators,sockets,light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of walls, Floors, ceilings etc.

Taking down carefully existing wooden board , Main switch, MCB DB boxes, TPN boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.

Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.

M&L for point wiring one light point controlled by one switch with PVC insulated and unsheathed, flame retardant Low Smoke(FRL-SH) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with stranded copper conductor single core in and including rigid PVC surface conduit not less than 19 mm dia, clip, with suitable MS terminal boxes ( not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dolly with 3 mm thick plastic laminated sheet top cover of approved colours including 1.50 sqmm green stranded copper conductor as continuous earth wire with all accessories including lugs required, complete all as specified and as directed

All as per Srl item No 4 above but one fan / Exhaust fan point controlled by one switch & regulator.

All as per Srl item No.4 above but one 3 pin 10 Amp socket outlet point controlled by one switch on independent board .

All asper Srl item no 4 above but one 3 pin 10 Amp socket outlet point controlled by one switch on same board .

All as per Srl item No.4 above but one bell/buzzer point controlled by one switch .

All as per Srl item No 4 above but one light point controlled by two 2-way switch .

Description all as per item No 4 above but for power point using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke(FRL-SH) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

M&L for Modular PVC surface conduit point wiring one light controlled by one modular switch with PVC insulated and unsheathed, flame retardant Low Smoke(FRL-SH) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with stranded copper conductor single core in and including rigid PVC surface conduit not less than 19 mm dia, clip, with suitable MS terminal boxes ( not less than 1.6 mm thick) including earth dolly with modular frame plates with matching cover plates including 1.50 sqmm green stranded copper conductor as continuous earth wire with all accessories including lugs required, complete all as specified and as directed . Note : Modular matching cover frame pates of defferent sizes are shall be measured separately.

All as per Srl item No.11 above but one fan / Exhaust fan point controlled by one modular switch & modular regulator .

All as per Srl item No.11 above but one 3 pin 10 Amp socket outlet point controlled by one modular switch on independent board .

All as per Srl item No.11 above but one 3 pin 10 Amp socket outlet point controlled by one modular switch on same board .

All as per Srl item No.11 above but one bell/buzzer point controlled by one modular bell switch.

Description all as per item No 11 above but for power point using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke(FRL-SH) cable for 3/6 pin 15 Amp socket outlet controlled by one modular switch on independent board with and including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

M & L for Modular concealed point wiring one light controlled by one modular switch with PVC insulated and unsheathed flame retardant Low Smoke(FRL-SH) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with modular MS terminal boxes (not less than 1.6 mm thick) including earth dolly with modular frame plates with matching cover plates all modules including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed for the following. Note : Modular matching cover frame pates of defferent sizes are shall be measured separately.

All as per Srl item No.17 above but one fan / Exhaust fan point controlled by one modular switch & modular regulator.

All as per Srl item No.17 above but one 3 pin 10 Amp socket outlet point controlled by one modular switch on independent board.

All as per Srl item No.17 above but one 3 pin 10 Amp socket outlet point controlled by one modular switch on same board.

All as per Srl item No.17 above but one bell / buzzer point controlled by one modular bell switch

Description all as per item No 17 above but power point with modular MS Terminal Box (not less than 1.6mm thick) complete with PVC insulated and unsheathed flame retardant Low Smoke(FRL-SH) cable of 2.5 sqmm single core multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with for 3/6 pin 15 Amp modular socket outlet 2 module controlled by one modular switch on independent board with and including 1.50 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

M&L for Modular Casing Caping point wiring one light controlled by one modular switch with PVC insulated and unsheathed flame retardant Low Smoke(FRL-SH) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including PVC casing caping, with modular MS terminal boxes (not less than 1.6 mm thick) including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed . Note : Modular matching cover frame pates of defferent sizes are shall be measured separately.

All as per Srl item No.23 above but one fan / Exhaust fan point controlled by one modular switch .

All as per Srl item No.23 above but one 3 pin 10 Amp socket outlet point controlled by one modular switch on independent board.

All as per Srl item No.23 above but one 3 pin 10 Amp socket outlet point controlled by one modular switch on same board.

All as per Srl item No 23 above but one bell / buzzer point controlled by one modular bell switch

Description all as per item No 23 above but for power point using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed,flame retardant Low Smoke(FRL-SH)cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with PVC Casing Caping and including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

M&L PVC casing caping point wiring for one light controlled by one switch complete with PVC insulated and unsheathed flame retardant Low Smoke(FRL-SH) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including PVC casing caping, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dolly with 3mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed

All as per Srl item No.29 above but one fan / Exhaust fan point controlled by one switch .

All as per Srl item No.29 above but one 3 pin 10 Amp socket outlet point controlled by one switch on independent board.

All as per Srl item No.29 above but one 3 pin 10 Amp socket outlet point controlled by one switch on same board.

All as per Srl item No 29 above but one bell / buzzer point controlled by one bell switch

Description all as per item No 29 above but for power point using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke(FRL-SH) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with PVC Casing Caping and including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

M & L concealed point wiring for one light controlled by one switch complete with PVC insulated and unsheathed flame retardant Low Smoke(FRL-SH) ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dolly with 3 mm thick plastic laminated sheet in top cover including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed

All as per Srl item No 35 above but one fan / Exhaust fan point controlled by one switch

All as per Srl item No.35 above but one 3 pin 10 Amp socket outlet point controlled by one switch on independent board.

All as per Srl item No.35 above but one 3 pin 10 Amp socket outlet point controlled by one switch on same board

All as per Srl item No 35 above but one bell/buzzer point controlled by one switch

Description all as per item No 35 above but for concealed power point wiring with MS Terminal Box (Not less than 1.0 mm thick) complete with PVC insulated and unsheathed flame retardant Low Smoke(FRL-SH) cable of 2.5 sqmm single core multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.50 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

S&F switch piano ( PC ) flush button type 10 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 3 pin, 10 Amp ( PC )flush type complete all as specified and as directed.

S&F switch piano ( PC ) flush button type 20 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp and 20 Amp( PC ) flush type complete all as specified and as directed.

S&F switch piano ( PC ) flush button type 6 Amp single pole 2 way complete all as specified and as directed.

S & F delux Fan Regulator electronic rotary, socket type 240 Volt 50 Hz complete all as specified as directed.

S&F switch bell push ( PC ) button type 6 Amp single pole complete all as specified and as directed.

S&F Bell,DING DONG AC 230Volts,single pole type complete all as specified and as directed.

S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed.

S & F 9W LED lamp B22,CDL,Lumen output 850 Im, 3 Star rating 6500 K, 56 mm dia complete all as specified as directed.

S&F ceiling rose,surface bakelite 65 x50mm three terminals complete all as specified and as directed.

S & F modular switch one way 10 Amp,1 module complete all as specified and as directed .

S&F modular socket 10 Amp,2/3 pin combined 2 module complete all as specified and as directed.

S & F modular switch one way 20 Amp,1 module complete all as specified and as directed.

S & F modular socket 10 Amp,/20 Amp,2/3 pin combined 2 module complete all as specified and as directed.

S & F modular Fan Regulator fan socket type regulator,2 module complete all as specified as directed.

S&F modular bell push 10 Amp ,1 module complete all as specified and as directed.

S&F Modular matching cover frame plates for 1/2 modules complete all as specified and as directed.

S&F Modular matching cover frame plates for 3 modules complete all as specified and as directed.

S&F Modular matching cover frame plates for 4 modules complete all as specified and as directed.

S&F Modular matching cover frame plates for 6 modules complete all as specified and as directed.

S&F Modular matching cover frame plates for 8 modules complete all as specified and as directed.

S&F Modular matching cover frame plates for 12 modules complete all as specified and as directed.

S&F Modular matching blanker complete all as specified and as directed.

S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar 4 ways 240 V complete all as specified and as directed.

S&F sheet metal enclosure double door suitable for distribution boards when MCBs to be used having 100Amp rated bus bar SPN, 8 ways 240 V complete all as specified and as directed.

S&F sheet metal enclosure double door concealed suitable for distribution boards when MCB to be used having 100 Amp rated bus bar 12 ways 240 V complete all as specified and as directed .

S & F sheet metal enclosure single door concealed suitable for distribution boards for MCB single pole and neutral 240V 2 way without bus bar complete all as specified and as directed.

S&F MCB DP 40 Amp 240 V ,10KA ,'C' series,complete all as specified and as directed with copper lugs complete all as specified and directed .

S&F MCB DP 63 Amp 240 V ,10KA ,'C' series,complete all as specified and as directed with copper lugscomplete all as specified and directed .

S&F MCB single pole 6 to 32Amps 240 V,10KA, 'B' series,complete all as specified and as directed with copper lugs complete all as specified and directed .

S&F in replacement of LED security light fitting 1 X 36 W LED energy saving & environmental freindly long life versatile pressure die cast aluminium roadway luminaire with high power LEDs as light source and electronic driver suitable for existing pole 32 mm dia light grade tube including connection with 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole complete as specified and as directed.

S&F VTPN DB-DPX Box 4 way single door with provision for DPX MCCBs as out going no MCB's 8+12 complete all as specified and as directed.

S&F VTPN DB-DPX Box 4 way double door with provision for DPX MCCBs as out going no MCB's 8+12 complete all as specified and as directed.

S&F in replacement of MCCB 100 Amps,4 pole,415volts,3 phase,50HZ, having 16 KA rupturing capacity, 415 volts with electronic trip arrangment and setting screw upto 70- 100% including making connection with excisting cable with connection and materials like copper strips,lugs,nut & bolts etc. complete all as specified and as directed.

S & F 9W LED bulb yellow B22,CDL,Lumen output 850 Im, 3 Star rating 6500 K, 56 mm dia complete all as specified as directed.

S&F LED lights fitting 22 Watt, 220V, decorative ultra slim LED tube light polycarbonate body connecting up to from existing/ new ceiling rose complete all as specified and directed

S&F replacement of existing fault LED batten fitting 18/20 Watt,220V, decorative ultra polycarbonate body batten connecting up to existing celing rose of suitable size from ceiling rose complete all as specified and directed

S&F 36 W 2 feet X 2 feet LED Ultra mordern recess mounting luminaire suitable for armstrong/ grid ceiling in MS housing with high brightness LEDs incl wiring upto and terminating into existing / new ceiling rose complete all as specified and directed .

S & F 9 Watt LED GLAZE Wall mounted fixture in durable plastic body & designer mesh in gold finish with LED Bulb complete as specified and as directed.

S&F 10 W LED Polymer Bulkhead luminaire energy efficient suitable for wall , ennvironmental friendly,ulta modern ,energy saving, surface mounted LED luminaire complete all as specified and as directed.

S&F LED security/ street light fitting 1 X45 W LED energy saving & environmental freindly long life versatile pressure die cast aluminium roadway luminaire with high power LEDs as light source and electronic driver suitable for pole, light grade GI tube bracket, bend to shape 1.80 mtr length with two nos clamp of size 32mm x 3 mm with nut, bolts, washers etc including connection with 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole complete as specified and as directed.

S&F LED tube light fitting 1x20 Watt, 220V, decorative ultra slim LED tube light polycarbonate body connecting up to existing/new celing rose of suitable size from ceiling rose complete all as specified and directed

S&F LED tube light fitting 1x24 Watt, 220V, decorative surface and wall mounted LED batten with polycarbonate body, housing & integrated electronic driver connecting up to existing/new celing rose of suitable size from ceiling rose complete all as specified and directed

S & F decorative wall light fixture( FLORET ) type made of polycarbonate , including LED Bulb 10 Watts complete all as specified as directed .

S&F LED security/ street light fitting 1 X 35/36 W LED energy saving & environmental freindly long life versatile pressure die cast aluminium I roadway luminaire with high power LEDs as light source and electronic driver suitable for pole , 32 mm dia light grade tube bracket, bend to shape 1.80 mtr length with two nos clamp of size 32mm x 3 mm with nut, bolts, washers etc including connection with 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole complete as specified and as directed.

S & F sheet metal enclosure with two pin socket , chain plug cover with one MCB SP of 20 Amp capacity with alignment 10 KA ‘C’ series complete all as specified and as directed.

S&F for sub main wiring with PVC insulated, unsheathed 2 single core cable 1100 volts grade with copper conductor of size 10 sq mm (Nominal area) multi stranded drawn into conduit (Existing / new) with and including 6 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: New conduit and conduit accossories shall be measured separately.

S&F for sub main wiring with PVC insulated, unsheathed 2 single core cable 1100 volts grade with copper conductor of size 6 sq mm (Nominal area) multi stranded drawn into conduit (Existing / new) with and including 4 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: New conduit and conduit accossories shall be measured separately.

S&F for sub main wiring with PVC insulated, unsheathed 2 single core cable 1100 volts grade with copper conductor of size 6 sq mm (Nominal area) multi stranded drawn into conduit (Existing / new) with and including 2.5 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: New conduit and conduit accossories shall be measured separately.

S&F for sub main wiring with PVC insulated, unsheathed 2 single core cable 1100 volts grade with copper conductor of size 4 sq mm (Nominal area) multi stranded drawn into conduit (Existing / new) with and including 2.5 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: New conduit and conduit accossories shall be measured separately.

S & F Regid non-metallic PVC conduit not less than 32 mm dia (external) ISI marked (on surface) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etc complete all as specified and as directed

S & F Regid non-metallic PVC conduit not less than 20 mm dia (external) ISI marked (on surface) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etc complete all as specified and as directed

S&F in replacement sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar 4 ways 240 V complete all as specified and as directed.

S&F in replacement sheet metal enclosure double door suitable for distribution boards when MCBs to be used having 100Amp rated bus bar SPN, 8 ways 240 V complete all as specified and as directed.

Supply and fix in replacement/new, 1100 Volts grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape & overall PVC sheathed in service connection, one twin core cable flat or circular of size 16 Sq mm to be connected to existing MCB box / Main switches complete all as specified as dircted.

Supply and fix in replacement/new, 1100 Volts grade heavy duty cable PVC insulated standard aluminium conductor served with inner sheathing of PVC tape & overall PVC sheathed in service connection, one twin core cable flat or circular of size 10 Sq mm to be connected to existing MCB box / Main switches complete all as specified as directed.

Supply and fix in replacement/new, 1100 Volts grade heavy duty cable PVC insulated solid aluminium conductor served with inner sheathing of PVC tape & overall PVC sheathed in service connection, one twin core cable flat or circular of size 6 Sq mm to be connected to existing MCB box / Main switches complete all as specified as directed.

S & F AC Static Digital single phase Multi function KWH meter with meter cover box current rating 5 to 30 Amps, 2 wire 240 Volts, 50 Hz, , 240 Volt ,complete all as specified and as directed by Eng-in-Charge.

S&Fixing in replacement of LED security/ street light fitting 48/45 W LED energy saving & environmental freindly long life versatile pressure die cast aluminium roadway luminaire with high power LEDs as light source and electronic driver suitable for existing pole/light grade GI tube bracket including connection with 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole complete as specified and as directed.

S&F in Repair 20 W LED 3000 K Yellow tube light fitting with extruted polycarbonate, environmental friendly, energy efficient LED fitting incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed.

S&F decorative gate light 250 mm dia MOON (OPAL) made up of high grade unbreakable polycarbonate material suitable for retrofit bulb upto 20 W LED lamp complete all as specified and as directed.

S& F 9 Watt decorative wall light STYLO with LED lamp mounting type champange gold finish fixture with plastic body complete all as specified and as directed.

S& F 15 Watt LED SLEEK SQ LED Al-die-cast body,finish with drop down PC diffuser to deliver low glare illuminition with optimized heat sinkast body compact , recessed mounted square LED complete all as specified and as directed.

S&F decorative LED Post Top Lantern (CLEAR)35 Watt ,IP 65 energy saving,enviromental friendly,long life aesthetically desighned with symmentrical light distribution,spun alumnium lumiaire Clear Cover with high power LED fixture suitable for pole dia 32/40 mm complete all as specified and as directed.

S& F 15 Watt LED SLEEK SQ LED Al-die-cast body,finish with drop down PC diffuser to deliver low glare illuminition with optimized heat sinkast body compact , surface mounted round LED complete all as specified and as directed.

S&Fixing in building storage type water heater (Geyser), 230 Volt AC, 25 Ltrs capacity with minimum 5-star rating comprising inner tank, suitable heatng element, thermostate with adjustable temperature stting 0-90 C, indication lamps provision ofr inlet outlet and air vent connections & NRV, PVC connection 15 mm size, heavy duty with brass nuts, 450 mm long mounteted on wall surfaces including all fixing arrangement such s faster bolts, nuts washers etc complete including making good disturbed wall surfaces matching with the existing surfaces and finishing all as specified and as directed by Engr-in-charge

S&F in replacement of LED Ultra mordern recess mounting luminaire 34/36 W 2'X2' environmental friendly,new genration,aesthetically desighned fitting suitable for grid celing with high brightnes SMD LEDs incl wiring upto and terminating into existing ceiling rose complete all as specified and directed .

S&F 100 W LED 6000K exclusive innovative designed, long life versatile pressure dia-cast aluminium flood light luminaire with high power LED as light source. incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed.

S & F Athena 2 ( BIG SIZE PRISMATIC) post top lantern in soothing opal finish made of polycarbonate with LED lamp 25 W complete all as specified and as directed.

S&F NIMBUS decorative surface mounting fixture 20 W dome shaped pendant green and black finish incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 3.0 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of SSR PT 1, with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

M/S RAJ KUMAR SINGH

M/s Ravi Traders

M/S Kharya Associates

SHRI HARI CONSTRUCTION