CERTAIN BR REPAIR TO MAP PH II ACCN SAHEED BHAGAT SINGH ENCLAVE AND SUB AJIT SINGH ENCLAVE UNDER AGE BR II OF GE (WEST) FEROZEPUR CANTT

Amount

Taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:4 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5mm thick cement plaster on ceiling surfaces in cement mortar 1:3 finished fair and even without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of distemper oil emulsion over 2mm thick wall care putty of any shade on walls surfaces complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls etc. and applying three coats of colour wash complete all as specified and directed.

M&L preparation of new plastered surfaces of ceiling & applying three coats of white wash on ceiling surfaces complete all as specified and directed.

Supply only integral Liquid water proofing compound (WPC to be mixed @200ml per 50 Kg bag of cement) complete all as specified and directed.

M&L preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 2mm thick wall care putty complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each complete all as specified and directed.

All as per srl item No 11 above here-in-before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and directed.

Taking down Chowkats or frames not exc. 1.5 sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1.0 sqm but not exceeding 2 Sqm each and refixing in same opening complete all as specified and directed.

Resecuring, or easing & adjusting without taking down shutter of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

Taking down shutters only of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

M&L pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 125mm x 60 mm including one shop coat of red oxide primer complete all as specified and directed.

M&L pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 105mm x 60 mm including one shop coat of red oxide primer complete all as specified and directed.

M&L cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in fillings and mass concrete, filling backs of chowkats etc. complete all as specified and directed.

S&F of 35mm thick flush door shutter of solid core construction with particle board core and plywood face panels, commercial type on both sides one face is covered with decorative face veneer with lipping /frame to match complete all as specified and directed.

S&F for glazed and skeleton shutters 30 mm thick 2nd class hard wood open rebated and prepared to receive glass divided into squares rebated sash bars any numbers, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, sizes of memebres as specified in SSR Part-I section 8 clause 8.20 (a) (glass windows etc) complete all as specified and directed.

S&F 300mm long alluminium alloy anodised, sliding door bolt with hasp,staple (bolt type) and fix clips of sheet,cast of extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F alluminium anodised tower bolts 200 mm long fixed to doors complete all as specified and directed.

S&F alluminium anodised handles 150 mm long fixed to doors complete all as specified and directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and directed.

S&F 300 mm mild steel ordinary rat tail spring including roller and roller plate complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.10mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M&L preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a shop coat of primer complete all as specified and directed.

M&L preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a shop coat of redoxide priming complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC "C"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles & rails with suitable PVC sheet beading and jointed togeather with solvent cement complete all as specified and directed.

S&F PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT door handle, 150 mm long and fixed with steel screws complete all as specified and directed. Makes: Prayag/Polytuf

S&F in repairs18mm thick for medium density fibre board, exterior grade, fixed to framework timber with screws including 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F continous (piano) hinges of mild steel bright finish or electro galvanised with flap (when open) 30mm,fixed with steel screw complete all as specified and directed.

S&F 40mm dia, cupboard knobs with nut, screw & washer of brass, polished complete all as specified and directed.

S&F alluminium anodised handles 100 mm long fixed to windows complete all as specified and directed.

S&F alluminium anodised tower bolts 100 mm long fixed to windows complete all as specified and directed.

S&F in repairs 40mm dia, cupboard knobs with nut, screw & washer of brass, polished complete all as specified and directed.

S&F in repair 75mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified and directed.

S&F in repair 300mm long alluminium alloy anodised, sliding door bolt with hasp,staple (bolt type) and fix clips of sheet,cast of extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F in repair alluminium anodised handles 150 mm long fixed to doors complete all as specified and directed.

S&F in repair alluminium anodised tower bolts 200 mm long fixed to doors complete all as specified and directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring as fixed in repairs complete all as specified and directed.

S&F in repair butt hinges, 100mm long of mild steel, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples fixed in repairs complete all as specified and directed.

Hacking out old broken glass (any thickness,size quality or description ) fromfrom metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F 3 mm thick acrylic plastic sheet fixing with screws or oil putty/beading in square n. exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 4.80 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed.

All as per Ser item No 50 here-in-above but exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F anodised aluminium window, ventilator etc size 0.55 kg/Rm fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding aluminium frame of approved size, including necessary joining cleats, glazing clips, powder coated aluminium snap beading, screws, including necessary anodised aluminium fittings like handles etc complete all as fixed in reapairs all as specified as per manufacturers instructions complete all as specified and directed. Note: EPDM Rubber beading/gasket measured and paid for seperatley.

Supply only EPDM Rubber beading around glass in aluminium windows /ventilator shutters complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

M&L cement concrete 1:2:4, type B-1(using 20 mm graded stone aggregate) as in floor topping/ roof top 25mm thick, surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L 40mm thick cement concrete 1:2:4, type B-1(using 20 mm graded stone aggregate) as in floor topping, surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L 50 mm thick cement concrete 1:3:6, type C-2 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.

M&L cement concrete 1:4:8, type D-2 (using 40mm graded aggregate) in foundations/sunken filling and mass concrete complete all as specified and directed

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation complete all as specified and directed.

All as per item No 59 here-in-before but 20 mm bore tubing complete all as specified and directed.

S&F GI steel water tubing,15mm bore medium grade galvanized with all fittings and fixed to walls and celling or laid in floor complete all as specified and directed.

All as per item No 61 here-in-before but 20 mm bore tubing complete all as specified and directed.

S&F 15 mm bore Unplasticized PVC pipes of pressure rating 10 kgf/cm2 laid in trenches complete to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only, after cleaning old steel water tubing,15 mm bore and connections in new or old position using new fittings (pipes obtained from item 59 to be reused) complete all as specified and directed.

All as per item No 64 here-in-before but 20 mm bore (pipes obtained from item 60 to be reused) complete all as specified and directed.

S&F in repair bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair stop valves, fancy type, CP with long shank and cup (concealed type) screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed.

S&F in repair Stop valves 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair gunmetal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F in repair central hole basin mixer for wash hand basin including all fittings ie including connection pipe as per manufaturers specification complete all as specified and directed.

S&F in repair wall mixture 3 in-1 with provision of overhead shower complete with 115 mm long bend pipe on upper side,connecting legs and wall flange complete all as specified and directed.

S&F in repair bib taps, fancy type CP, long body (Sink), screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed.

M&L for taking down existing Bib tap and pillar taps/sink mixture/wash hand basin mixture of any type for replacing washer/ brass spindle etc. and refixing the same complete all as specified and directed.

M&L for taking down existing stop valve/angle cock 15 mm bore by replacing washer/spindle etc.And refixing the same complete all as specified and directed.

S&F in repair PVC waste pipe 32 mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks / WHBs complete all as specified and directed.

S&F in repair PVC Connection, Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450 mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and directed.

S&F in repair PVC Connection, Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 600 mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and directed.

S&F in repair 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repair PVC cover for tanks of capacity 500 to 1000 ltrs including taking out old broken covers with GI nuts and bolts 3/16" dia and 1" long bolts with washers (8 Nos with each cover and 2 Nos hing bolts and nuts 8 mm dia 50mm long complete all as specified and directed.

S&F in repairs 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank all as specified in SSR Part-I complete all as specified and directed.

S&F in repairs 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

M&L for Water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WC's etc shall be as under :- (i) Application of Two component Acrylic modified Cementitious coating (aa) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coatings and achieve a gripping profile that is clean, dry and free from laitance and any other form of surface contamination. The installation instructions in manufacturer's published literature should be strictly complied with including but not limited to the following:- (bb) Chipping out any visible cracks in "V-Groove" pattern as applicable. Special attention on this part Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/ Dr Fixit 302 SBR late Perma latex SBR / FOSROC Nitabond SBR latex / Asian Paints latex as required. Final cleaning surface with power grinder, wire brush, hair brush & vacuum pressure if required. (cc) Dampen all surfaces immediately ahead of application of Acrylic modified Cementitious coating Sika Top Seal - 107/ Brush Bond FOSROC/ Dr Fixit/ STP/CICO. (dd) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic mo Cementitious coating of Sika Top Seal - 107 / Brush Bond FOSROC/ Dr Fixit/ STP/CICO of vis as per manufacturer's instructions.

(ee) Apply Glass Fabric Sheet of Sika Fab 1/FOSROC/ Dr Fixit/ STP whilst the first coat is wet. (ff) Once touch dry, apply second coat of Acrylic modified Cementitious coating of Sika Top Sea /Brush Bond FOSROC/ Dr Fixit/ STP/CICO of viscosity as per manufacturer's instructions entire area. (gg) Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direct angle to the previous coat. (hh) The waterproofing coating should be taken to a height minimum 300 mm above the floor finish level on the vertical surface. (jj) It is essential to cure Acrylic modified Cementitious coating immediately after application 3-8 Hrs drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize (kk) A protection plaster (12-15mm thick) in CM 1:3 admixed with appropriate Integral water Compound has to be applied on the walls Admixture :- Sika plastocrete plus/FOSROC/Dr Fixit/STP/CICO confirming to IS 2645 Providing and applying a protection screed of 50 mm thick 1:4 cement sand mortar admixed with Sika plastocrtete over applied water proffing coating on horizontal surface. Admixture :- Sika plastocrete plus/FOSROC/Dr Fixit/STP/CICO confirming to IS 2645 (ii) All the corners and joints should be pretreated with elastic waterproffing sealing tape with a woven bonding on each surface an elastic expansions zone in the centre of make sika Tape S/FOROC/Dr Fixit/STP

(mm) The membrane has to be protected in accrodance with the manufacture's recommendance until placemnent of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accrodance with manufacturer's recommendations. (nn) Waterproofing treatement has to carried out through applicators authorisrd. (ii) All the joints of pipesand traps within sunken portion shall be sealed properly by Epoxy sealant. (iii) All CI traps in sunken slab to be enclased with PCC 1:1:5:3 ( Min 15 cm) all - round. (iv) the sunken portion shall be filled with PCC 1:5:10 type E-2 ( using 40 mm stone aggregate ) complete all as specified. (v) Providing drainage spout pipe GI 40 mm dia bore light grade upto outside of outer wall ( approx 450 mm to 600 mm long ) including cutting to existing wall and making good the distrubed surface complete all as specified and directed. (vi) Providing 25 mm thick cement concrete 1:2:4 type B-0 using 12.5 mm grade stone aggregate as in flooring for laying fllor finish all as specified. Note ;- Srl Item No 22 (iv) ,(v) & ( vi) shall only be measured and paid for seprately under respective items.

Refixing of vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F in repair Vitreous china squatting pan, Orissa pattern, size 580mmx440mm white/ coloured with integral foot rests including trap set in and including concrete and connection to trap, and to flushing pipe, anti-syphonage pipe, etc complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white/coloured including seat & cover, flush pipe, connection to drain and to flushing pipe, anti-syphonage pipe, etc complete all as specified and directed.

S&F in repairs PVC 10 ltr. Cap. valveless syphonic action type, flushing cictern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc complete all as specified and directed.

S&F in repairs vitreous china wash basin, white/ coloured, flat back, size 550mmx400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing and incl 450mm long PVC connection complete all as specified and directed.

S&F in repair Brass chromium plated bottle traps 32mm dia for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union , cap and fixing in repair complete all as specified and directed.

S&F in repairs PTMT grating doom 100mm dia with or without waste hole fixed complete all as specified and directed.

S&F in repairs 32mm dia waste coupling of PTMT fittings full or half threaded(minimum wt 32mm-45 gms for steel sinks/wash hand basin etc complete all as specified and directed.

S&F in repairs Seat Cover (White colour) for pedestal pattern as fixed complete all as specified and directed.

S&F in repairs corner glass shelves 300 mm radious,8mm thick as per sample radious for bath room, fixed on suitable support of brass chromium plated clips complete all as specified and directed.

S&F in repair 125 mm chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides & fixed to walls with steel screws and wooden/rawl plugs complete all as specified and directed.

S&F in repairs stainless steel soap dish (not less than 1mm thick) of type as directed,fixed to walls with chromium plated brass screws with wooden/rawl plugs,in repair complete all as specified and directed.

S&F in repairs toilet paper holder of brass, chromium plated or stainless steel fixed in repair to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F in repairs replacement of pressure JET for EWC including PVC connection and CP fitting as fixed in repairs complete all as specified and directed.

Taking down eaves gutters and rain water pipes( any size or pattern),including all fittings heads shoes bends swan-necks etc complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed to walls or laid in trenches complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm dia Junction single (Single or double T) equal or unequal complete all as specified and directed.

S&F 110mm dia Junction single (Single or double T) equal or unequal complete all as specified and directed.

Dismantling floor hearth or wall/stone tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and incl screed bed 15mm thick in cm(1:6) complete all as specified and directed.

M&L Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular), primium quality on vertical surfaces such as in skirting /dado etc area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 10 mm thick rendering in cement mortar (1:4), complete all as specified and directed.

M&L Glazed ceramic coloured (colour & shade as approved) tile 350mmx250mm/450mmx350mm and 7mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry over & including 10 mm thick rendering in cement mortar 1:4 and pointed in white/ coloured cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 10 mm thick plaster as in back coat cement mortar 1:4 complete including moulding at corners and polishing type complete all as specified and directed.

M&L for moulding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for welding in running for thickness of metal tio be welded not exceeding 6mm in repair complete all as specified and directed.

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gm) complete all as specified and directed.

S&F Grating round 140 mm size of PTMT. (Minimum weight 50gms) complete all as specified and directed.

S&F Grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed.

All as per Srl item No 116 here-in-before but with waste hole of PTMT. (Minimum weight 100gms) complete all as specified and directed.

S&F in repairs Stack clamps for 100 mm dia pipes , out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F stack clamps for 75 mm dia pipes out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore dia of outlet of pipe complete all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement and making good of disturbing gound with PCC 1:2:4 complete all as specified and directed.

S&F stainless steel plate rack of standard pattern & of size 900mm x 750mm x 250 mm.The thickness of stainless steel sheet shall be 1.00 mm & grade of sheet shall be 304 AISI including fixing to wall with 4 Nos 50mm screws & PVC rawl plugs complete all as specified and directed.

S&F in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, connecting union overall size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified and directed.

M&L for taking down existing low level flushing cistern and replacing the syphon, ball valve with washer and Flush handle complete all as specified and directed.

M&L in repairs for harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

M&L for 40 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F for snake guard/lizard guard of aluminum sheets with PVC/jute beading and resistant to corrosion and fixed with outdoor conditions and should be securely fastened to prevent gaps complete all as specified and directed.

S&F in repairs for health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Vee Vee Enterprises (BID ID -3342326)

M/s Sudarshan Enterprises (BID ID -3342541)

M/S Yashpaul Gulati (BID ID -3342600)

Kissan contractor and engg works (BID ID -3342482)

M/s Shri Krishna Enterprises (BID ID -3342396)

Manjeet Singh Contractor (BID ID -3342826)

M/s Bansi Lal (BID ID -3342494)