Enerzation of Hand Pump at village Samthyari in GP Kandhar in Tehsil Arki District Solan HP SH Supply and Errection of Pumping set with allied accessories Providing Laying Jointing of PPR pipe 32mm dia providing laying jointing 32mm dia GI Pipe lig

Amount

Providing and installing submersible pump of Crompton / KSB make confirming to ISI- 9034-1976 along with a directly coupled submersible type squirrel case electric induction motor suitable fr operation on 230 V, single phase 50 CPS, AC supply with water lubricated bearing, provided with pivoted segment type thrust bearings to with stand vertical pressure with minimum wear and terar and with device to take up the expansion of water with heating of motor complete in all respects.( 1 Set of 2 HP) Total Head :- 130 Mtr DIischarge : 0.9 LPS R / Main 32mm dia (L) 210 Rmt

Supp;ying and fixing rope wire 6mm2 dia suitable to wear the weight of submersible motor pumps set and GI Pipe etc. including all leads and lifts complete in all respects.

Supp;ying and fixing submersible cable 4mm2 3 core of L&T /Havell make complete in all respects.

Supplying and fixing 3 phase panal board of BS / L & T / Havells / BS make with Ampears meter, volt meter Over load relay kit kat indicator set MCCB etc. including carriage of material up to all leads and lifts complete in all respects.

Supply and fixing of supporting clamps to submersible pump set of required size complete in all respects.

Providing laying & jointing testing and lowering in bore 32mm dia pipe PPR column PN 16 SDR 7.4 as standard ISI make including carriage of materials upto all leads and lifts complete in all respects.

Providing and fixing Gun metal wheel valve of superior quality ISI marked 32mm dia including carriage of materials upto all leads and lifts complete in all respects.

Lifting of Hand Pump and Lowering of submersible motor and pump in the bore well and to the entire satisfaction of the Engineer -in-charge.

Earthing with GI earth plate 600mm x600mmx6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt complete as required. Extra for using charcoal and slat for GI or copper plate earth electorde as required.

Providing and fixing GI Wire with GI Pipe fencing arroud the Bore well 6m2 withgate welding and Locking arrengement at site complete in all respects.

Providing and fixing PVC pipe 20mm dia for laying of PVC submersible cable from control panel to hand pump and to the entire satisfaction of the Engineer-in -charge.

Excavation in drain & channels etc. in earth work including drerssing of side and bed and disposing of excavated earth upto a lead of 20 meters and lift upto 1.50 meters disposed earth to be levelled and neatly dressed in pick jumper work including all leads and lifts complete in all respects as per direction of Engineer- in Charge.

Laying & jointing 32mm dia G.I pipe ( Light class) screwed & socketed in rising main (Earth work in trenches to be measured & paid for sepertally including carriage of materials upto all leads and lifts complete in all respects.

Excavation in foundation, trenches etc. earth work in all type of soil such as pick work, jumper work, blasting work kankar,mooram singles including decomposed soft and hard rock etc. upto all heights stacking the excavated earth not more than 3 metres clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths and sides of foundation etc.consolidating each deposited layer by raming and watering and then disposing of all surplus excavated earth upto all leads and lifts as directed by the Engineer in charge complete in all respects.

Providing and laying cement concrete 1:3:6(1 Cement :3 Sand : 6 graded stone aggregate 40mm nominal size)and curing complete excluding the cost of form work in foundation and plinth including all carriage of materials upto all leads and lifts complete in all respects.

Providing and laying cement concrete 1:1½:3 (1 cement: 1½ sand: 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in.

Foundations , footings bases of column and the like and mass concrete i/c all leads & lifts etc. complete in all respects.

Walls any thickness (but not less than 0.10meter thickness including attached pilasters,buttresses plinth and string courses etc. from top of foundationlevel upto floor two level including all leads and lifts etc.complete in all respects

Providing form work with mild steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu reinforced concrete work and plain concrete work in :-

Flat surfaces such as soffits of suspended floors, roofs , landing and the like ,i/c all leads and lifts, complete in all respects.

Vertical surfaces such as walls(any thickness )partition and the like including attached pillasters, buttresses plinth and string courses and like including all leads and lifts etc. complete in all respects.

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level including cost of binding wires and carriage of materials upto all leads and lifts complete in all respects.

Providing and laying cement concrete work 1:2:4(1 Cement :2 Sand: 4 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work & reinforcement for reinforced concrete work in :-

Suspended floor, roofs landings shelves and their supports, balconies, beams, girders, bressumers and cantilevers up to floor two level including carriage of materials with in all leads and lifts, complete in all respects.

Manufacturing, supplying & fixing of M.S frame 35x35x5mm with M.S sheet man hole cover 1.66mm thick made of M.S Angle 25x25x5mm with locking arrangement with lock and painting with red oxide complete in all respects as per drawing & design with in all leads & lifts complete & as per the direction of the Engineer-in Charge.

Laying and Jointing GMS tube (Light class) for scour , over flow, outlet , inlet , ventilating pipe including all carriage of materials upto all leads and lifts complete in all respects.

50mkkm dia.

Providing and fixing gun metal wheel valve of superior quality heavy duty ISI marked including carriage of materials upto all leads and fifts complete in all respects.

50mm dia

Laying and jointing in trenches GMS pipe (Light class) tube fittings & commissiong testing at site (earth work in trenches to be measured and paid for separately) including all carriage of materials up to all leads and lifts complete in all respects.

15mm dia.

25mm dia.

32mm dia.

Providing & fixing Gun metal gate valve of superior quality heavy dduty ISI marked various dia including carriage of materials upto all leads and lifts complete in all respects.

15mm dia.

25mm dia.

32mm dia.

Joginder Kumar

NEEM CHAND

ROYAL ENGINEERING WORKS

Ravinder Singh Patial