REPAIRS TO INTERNAL WATER SUPPLY LINES CLEANING OF WATER TANK AND PROVIDING PVC TANK AND COVER REPAIRS TO STAIR CASE PLINTH PROTECTION PLOOR TILES WALL TILES IN TOILES PLUMBING SANITARY FITTINGS ROOF SHEETING FALSE CEILING WALL PANELLING INTERNAL ELE

Amount

Disconnecting existing tanks, setting aside (or lowering if required) for repairs , cleaning etc and hoisting if required reconnecting and refixing in position for the following capacity :-

Capacity not exceeding 250 litres.

Capacity exceeding 250 litres but not exceeding 500 litres.

Capacity exceeding 500 litres but not exceeding 1000 litres.

Capacity exceeding 1000 litres but not exceeding 2000 litres.

Cleaning & removing all scale & dirt etc from existing tanks and mouths of circulating pipes of any description & washing down in the manner as specified for the following capacity :-

Capacity not exceeding 250 litres.

Capacity exceeding 250 litres but not exceeding 500 litres.

Capacity exceeding 500 litres but not exceeding 1000 litres.

Capacity exceeding 1000 litres but not exceeding 2000 litres.

All as per item No 2 above but from RCC tank of Capacity exceeding 1000 litres but not exceeding 2000 litres.

All as per item No 2 above but from RCC tank of capacity exc 10000 and n exc 20000 ltrs.

Supply and fix in repairs threaded type PVC tank covers with all fixing accessories for PVC tanks for capacity 250/500/1000 Ltrs fixed with screws complete all as specified and as directed by Engr-in-charge.

Taking up or down steel tubing and connections of 15 mm dia complete all as specified and directed.

Taking up or down steel tubing and connections of 20 mm dia complete all as specified and directed.

Taking up or down steel tubing and connections of 25 mm dia complete all as specified and directed.

Taking up or down steel tubing and connections of 50 mm dia complete all as specified and directed.

S&F tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 15mm bore including cutting /chasing in walls etc.

S&F tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 20mm bore including cutting /chasing in walls etc.

S&F tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 25mm bore including cutting /chasing in walls etc.

S&F tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 50mm bore including cutting /chasing in walls etc.

S&F 20mm dia UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with all fittings complete all as specified and as directed by Engr-in-charge.

S&F 25mm dia UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with all fittings complete all as specified and as directed by Engr-in-charge.

S&F in repair 500 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position incl dismantling existing tanks complete all as specified in SSR Pt-I

S&F in repair 1000 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position incl dismantling existing tanks complete all as specified in SSR Pt-I

S&F in repair of rotational moulded polyethylene water storage tanks of capacity 225 ltrs (Rectangle shaped with closed top and fixed in loft portion of the kitchen ) hoisted and fixed in position all as specified in SSR Pt-I

S&F in repair Gun-metal, globe or gate valves 15mm dia with iron wheel head screwed both ends for iron pipe and fixed etc... complete all as specified and directed by the EIC .

S&F in repair Gun-metal, globe or gate valves 20mm dia with iron wheel head screwed both ends for iron pipe and fixed etc... complete all as specified and directed by the EIC .

S&F in repair Gun-metal, globe or gate valves 25mm dia with iron wheel head screwed both ends for iron pipe and fixed etc... complete all as specified and directed by the EIC .

S&F in repair Gun-metal, globe or gate valves 50mm dia with iron wheel head screwed both ends for iron pipe and fixed etc... complete all as specified and directed by the EIC .

S&F in PVC ball valve 15mm dia with epoxy coated aluminium rod and high density ball (minium weight 142 gms) complete as directed by Engr-in-charge. Make- Prayag/Polytuff.

S&F in PVC ball valve 20mm dia with epoxy coated aluminium rod and high density ball (minium weight 210 gms) complete as directed by Engr-in-charge. Make- Prayag/Polytuff.

S&F in PVC ball valve 25mm dia with epoxy coated aluminium rod and high density ball (minium weight 455 gms) complete as directed by Engr-in-charge. Make- Prayag/Polytuff.

S&F in repair PVC ball valve 15mm dia with epoxy coated aluminium rod and high density ball (minium weight 142 gms) complete as directed by Engr-in-charge. Make- Prayag/Polytuff.

S&F in repair PVC ball valve 20mm dia with epoxy coated aluminium rod and high density ball (minium weight 210 gms) complete as directed by Engr-in-charge. Make- Prayag/Polytuff.

S&F in repair PVC ball valve 25mm dia with epoxy coated aluminium rod and high density ball (minium weight 455 gms) complete as directed by Engr-in-charge. Make- Prayag/Polytuff.

S&F in repair PVC ball valve 50mm dia with epoxy coated aluminium rod and high density ball (minium weight 1240 gms) complete as directed by Engr-in-charge. Make- Prayag/Polytuff.

S&F in repair bib tap 15mm chromium plated long body with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed by the EIC .

S&F in repairs Stop / angle cock 15mm chromium plate screw down screwed for iron pipe of brass ferrule etc complete all as specified and directed by EIC

S&F in repairs 15mm pillar tap cost copper alloy with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed by the EIC.

S&F in repairs 15 mm dia concealed type stop valve fancy type chromium plated etc complete all as specified and directed by EIC .

Demolition of cement concrete of any description and in any position not otherwise specifically provided for as in sunken floor and removal & rubbish of premises exc 500 m but n exc 1.5 km complete all as specified

M&L for applying high performance two component flexible acrylic Polymer cementitious waterproofing coating by two coats using 2kg/sqm in two coats having elongation of 150% after cleaning of surface and treating all surface cracks filled with cementitious non shrink grout at all surface patchwork defects with high early strength high performance rapid setting concrete, sealing bore packing joint with cementitious non shrink Grout all complete as per manufacturers specifications.

M&L for 15 mm thick rendering on concrete surfaces in CM 1:4 with WPC @ 3% by weight of cement (Note: Water Proofing compound will be measured and paid separately ) as in sunken floor, including finished even and smooth without using extra cement

Supply only integral water proofing liquid all as specified

M&L PCC 1:5:10 type , E2 (using 40 mm graded stone aggregate) as in sunken floor filling all as specified.

S&F in repair PVC valveless, syphonic action type, flushing cistern,10 ltr capacity low level, white, with inlet, ball valve, float and handle including brackets & flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern.Make:PRAYAG/Parryware or equivqlent.

S&F in repair of syphone single flush for flushing cistern,10 ltr capacity low level as per existing make as per site requirement.

M&L in repair Vitreous china wash hand basin, white, flat back of size 630 x 450mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, as in repairs, complete all as specified and as directed by Engineer-in-Charge.'

S&F in repair water closet white Vitreous China, semi-pedestal pattern (Anglo-Indian Type) with integral foot rest ‘P’ or ‘S’ trap 100 mm bore front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern and flushing pipe 32 mm dia MS chromium plated) complete all as specified and as directed by Engr-in-charge.

S&F in repair Vitreous China Urinal, Half stall type, white white (minimum), with grating and union for discharge pipe (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap,flush pipe and waste pipe)

S&F in repair Vitreous china urinal partition white of size 310x700 mm terminating about 40cm above floor line

S&F Glass shelf assembly for soap tray embedded in the wall complete all as specified.

S&F in repair Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges etc. With pair of brackets complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair coloured vitreous china wash down water closet pan (pedestal pattern) including Vitreous China valveless,syphonic action type, coloured flushing cistern, 10 litre capacity, low level with inlet, ball valve,float and handle including bracket, flush pipe of polyethylene of low or high density of PVC 32 mm dia,for low level cisterns and Plastic water closet seat,black,closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device including jet spray complete all as specified.

PVC connections 15mm size with PTMT nuts of length 600mm

PVC connections 15mm size with PTMT nuts of length 450mm

S & F of 32mm dia Flexible Waste hose for WHB / Sink / urnial etc…complete all as specified.

Taking down rain water pipes (any size or pattern ) including all fittings heads, shoes etc including removal

S&F 75 mm bore PVC (SWR) pipes single socket in any length with rubber ring jointed to fixed to wall complete all as specified

All as per item no.53 above but 110 mm bore

S & F 75 mm PVC (SWR) bends any radius complete all as specified

All as per item no.55 above but 110 mm bore

S&F 75 mm PVC (SWR) junction single (Single T) equal or unequal all as specified

All as per item no.57 but (Double T)

S&F 110 mm PVC (SWR) junction double (Double T) equal or unequal all as specified

S&F 75 mm PVC (SWR) branch piece single (single Y) equal or unequal all as specified

All as per item no.60 above but 110 mm bore

S&F 110mm PVC (SWR) vent cowl

S&F 75mm PVC (SWR) vent cowl

Taking down cement plaster or concrete etc including racking out joints hacking for key scrubbing down with water etc complete all as specified

M&L 15 mm thick rendering into two layers consisting 10 mm thick in CM 1:4 followed by 5 mm thick in CM 1:4 with WPC on fair faces of brick work or concrete surface including finished even and fair all as specified. (Note WPC shall be measured and paid separately) Note : Ht upto G+5 storey bldg, rate incl. of necessary Formwork, scaffoldin and safety arrangements

M&L 10 mm thick rendering on other than fair faces of brick work or concrete surface in CM 1:6 including finishing even and smooth without extra cement all as specified

M&L two coat cement of base paint over a coat of chalk whitening primer on new plasterd of walls including preparation of surfaces complete all as specified

M&L for two coat of oil bound distemper over a coat of chalk whitening primer on new plasterd of walls including preparation of surfaces complete all as specified

S&F PVC (SWR) floor trap Plain with grating including jointing with solvent cement 75 mm

S&F PVC (SWR) multi floor trap Plain with grating including jointing with solvent cement 75 mm

Petty repairs to leakage of bib taps, pillar cock stopcock PVC connection waste pipes float valves, angle valve, concealed valve GI union joints of GI pipe Re-fixing of bottle trap etc by changing the PVC washers/Sheet washers or any other minor accessories etc complete all as specified and directed .

Petty repair to high or low level flushing cistern by adjusting the float valve leaking of PVC connection, PVC bend including replacing of rubber washer check nuts plunger etc any type of flush complete all as directed.

Renewing glazed / ceramic tiles in patches area not exceeding 4 Sqm including removing and cleaning old tiles preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed.

Renewing plastering in patches area not exceeding 4 Sqm including removing and cleaning old plaster and applying two coats of white/colour wash on newly plastered surface as per site requirement complete all as specified and directed.

S&F in repair 32mm waste fittings brass chromimum plated for sinks and basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

S&F In repairs 15mm PVC two way bib tap long body with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed by the EIC.

S&F In repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete all as specified and directed.

S&F in repairs Brass CP shower rose 125mm dia size with or without swivel joint for fixing with 15mm pipe complete all as specified and directed.

S&F in repair CP Shower arm 300mm long 15 mm dia complete in all respect as specified complete all as specified and directed.

S & F in repair PVC Urinal waste pipe of size (31/32x800 mm dia) pipe.

S & F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (minimum weight 60gms).

Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. all as specified and as directed.

Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor wire drawn into existing concealed conduit including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following point wiring :- Make of cable : Plaza/Polycab/Finolex/ Havells.

One light/ fan/ exhaust fan/ 3 pin socket independent board/ buzzer point controlled by one switch.

One 3 pin socket outlet 5 Amps,same board with cables 1.5 Sqmm size.

One light point controlled by two 2- way switches, with cable 1.5 Sqmm size.

All as per item ser no-83 above here in before but one 3 pin socket outlet 5/15 Amps, independent board with cables 4.0 Sqmm size.Make :- Polycab/Finolex/Plaza

Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor drawn into including PVC casing & caping/fixed on wall/roof/ceiling etc of size not less than 20 mm dia including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following :- Make for PVC casing & caping: SUDHAKAR / AVON PLAST /PLAZA , Make for Copper cable: Finolex/Polycab / Plaza/ Havells.

One light point controlled by one switch.

One 3 pin socket outlet 5 Amps, independent board with cables 1.5 Sqmm size.

All as per item ser no-85 above here in before but one 3 pin socket outlet 5/15 Amps, independent board with cables 4.0 Sqmm size. Make :- Polycab/Finolex/Plaza/ Havells.

M&L for sub main wiring for phase and neutral with PVC FRLS insulated unsheathed multi stranded along with earth wire FRLS PVC insulted copper conductor, single core cable in and including surface/concealed /PVC conduit of appropriate size as specified for the following sizes. Note:- : 1. Cutting chases for concealed wiring shall be measured and paid seperately. 2. Rates are including taking down old unserviceable. Make for Copper cables: Finolex/ Polycab / Plaza/ Havells. Make of PVC Conduit: SUDHAKAR/FINOLEX/AVON PLAST.

2x 4.0 sqmm and 1x 4.0 sqmm as earth wire

2x 6.0 sqmm and 1x 6.0 sqmm as earth wire

S&F for switch piano, flush type single pole , one way 5 amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F for switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F for bell push flush type, 5 Amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F for switch piano, flush type single pole , two way 15 amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F for switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F for ceiling rose three terminals/ PVC/ polycarbonate, isolated body complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F for Lamp holder angular/batten type, PVC/ polycarbonate type with back plate complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc and including taking down old all as specified and as directed by Engr-in-Charge . Make: Anchor/Cona/Leader/Lisha.

Taking down existing rusted switch board sunken box from site including removing fixtures and fittings such as switch, socket fan regulator complete, removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces necessary plaster, white wash matches with existing colour of wall, floors, etc. all as specified and as directed.

Supply and fixing in repair of GI metal flush box suitable for mounting moduler plate of following modules:-

1 (or) 2 module

3 Module

6 Module

Supply and fixing in repair of combined both frame and cover plates fixing on mounting boxes for following modules:-

Cover plate with frame,1 module

Cover plate with frame,3 Module

Cover plate with frame,6 Module

Supply and fixing in repair of modular switch one way 5/6 A white Active one module all as specified and as directed by the Engineer-in-Charge.Make: Havells(Crabtree)/Legrand/Plaza, Anchor.

Supply and fixing in repair of modular switch socket combination 16 A, 6 pin 3 module flush type Active white two module complete all as specified and as directed by the Engineer-in-Charge .Make: Havells(Crabtree)/Legrand/Plaza, Anchor.

Supply and fixing in repair of socket 2M 6A-2/3 pin combined Active white all as specified and as directed by the Engineer-in-Charge.Make: Havells(Crabtree)/Legrand/Plaza, Anchor.

Supply and fixing in repair of modular fan step regulator,120 W-2 module all as specified and as directed by the Engineer-in-Charge.Make: Havells(Crabtree)/Legrand/Plaza, Anchor.

Supply and fixing in repair modular bell push 6 A one modulecomplete all as specified and as directed. Make: Havells(Crabtree)/Legrand/Plaza, Anchor.

Supply and fix Eco compact wall mounted LED batten for T8 LED tube CAT CROMPTON DIJB12LT8-20 with ULTRON high efficency LED polycarbonate tube with in built driver and metal heat sink 18 watt icluding taking down old unserviceable fittings all as specified and as directed by Engr-in-Charge.Make : Crompton LT8-20-865(2) /philips/wipro/Havells, Surya.

Supply and fix high efficiency wall mounted LED batten type not less than 9W 2 ft LED light fitting and including taking down old unserviceable fittings all as specified and as directed by Engr-in-Charge .Make : Crompton Cat ref CCS-103-10-65--SL-DP--NWH 10W/Philips/wipro/Havells, Surya.

Supply and fix Energy saving not less than 25 Watts LED light fitting ,IP65 powder coated pressure die cast aluminium high power street light with heatresisant toughened glass with lens by providing GI pipe medium grade 25 mm dia 1.5 Mtr in length with suitable size MS Clamp two nos made out of 25x3 mm FI incl two coat of synthetic enamel paint over a coat of red oxide primer, prewired and including connecting up with 3 core flexible copper conductor cable of 1.5 Sqmm from ceiling rose to fitting and including taking down old u/s damaged all as specified. Note:- Make :SURYA Cat part no:SLE UL 25W IP66 LXN or equivalent model of Philips/wipro/Havells.

Supply and fix ceiling fan 230 V, 1200mm smart saver-50 of Orient or equivalent of Crompton/Bajaj/Usha

Supply and fix Exhaust fan 300 mm Sweep and frame and louvers, 230 volts,50Hz. Make:- Khaitan/Crompton/Bajaj/Usha

S&F for Rigid PVC junction box three way 25 mm surface mounted four hole type for 5 Amp independent board complete with screw not and bolt all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader/plaza/AKG

S&F for Rigid PVC junction box three way 32mm surface mounted four hole type for 15 Amp independent board complete with screw not and bolt all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader/plaza/AKG

M&L for cutting chases on brick walls concrete surfaces not exc 10 cm girth and making good in cement mortar (1:3) the existing surface after carryiing out the concealed wiring including necessary finishes all as directed by Engr in charge.

VKR ENTERPRISES (BID ID -3067864)