Providing Furniture work at Avhalwadi Tal Haveli Dist Pune

Furniture Work

Providing and fixing ceiling of 6 mm thick acralik (white) false ceiling, with 24 gauge GI strips supported from roof, fixing main channels on the walls as per approved layout design. Providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanized in accordance with zinc coating 600 as per IS: 277 and consisting of angle cleats of size 25 mm wide X 15 mm thick with flanges of 22 mm and 37 mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastner 12.5 mm die X 40 mm long with 6 mm dia. Necessary cut outs to be made for fans, air-conditioners, lights etc.

Designing, Providing and fixing storage for cabin in 18mm in 100% gurjan plywood with finishing of laminate thickness 1.0 mm internally and externally side edge covered with PVC edge band on through feed edge bending machine and having provision for wire managements where ever necessary with all necessary hardware fittings ie. soft closing hinges, handles and channels with minimum 5 years of warranty . All complete as per drawing specification, direction, design, execution and supervision of the architect. plywood make centhury, suprem gold, sainik or equivalent

Designing, Providing and Panelling for cabin in 18mm in 100% gurjan commercial plywood with finishing of laminate thickness 1.0 mm internally and externally side edge covered with PVC edge band on through feed edge bending machine and having provision for wire managements where ever necessary with all necessary hardware fittings with minimum 5 years of warranty . All complete as per drawing specification, direction, design, execution and supervision of the architect.centhury, suprem gold, sainik or equivalent

Designing, Providing and fixing Table for cabin in 18mm in 100% gurjan plywood with finishing of laminate thickness 1.0 mm internally and externally side edge covered with PVC edge band on through feed edge bending and having provision for wire managements where ever necessary with all necessary hardware fittingsie. soft closing hinges, handles and channels with minimum 5 years of warranty . All complete as per drawing specification, direction, design, execution and supervision of the architect.

Designing, Providing and fixing Partition wall for cabin in 18mm in 50% gurjan commercial plywood with finishing of laminate thickness 1.0 mm internally and externally side edge covered with PVC edge band on through feed edge bending machine and having provision for wire managements where ever necessary with all necessary hardware fittings with minimum 5 years of warranty . All complete as per drawing specification, direction, design, execution and supervision of the architect.

Designing, providing and fixing full height glass partition with 12 mm clear glass (saintgobbain or modiguard and acid work or sand blasting work on it, as per our design) fixed with inter locking glazing profile (stainless steel brush finish) on both top and bottom. Bottom side of the profile should be fixed with floor with necessary ss screws and top side fixed with 75 mm X 40 mm X 1.20 mm thick medium-duty aluminium hollow tube (jindal or Banco) framing work. Aluminium hollow tube should also be fixed with proper frame work with all beams, soffit and ceiling with necessary brackets and cleats as required, including filling hardwood in the bottom level tube, which shall be connected to the glass partition (glazing profile).

Providing and applying the Asian Royal (water based) or approved equivalent grade paint. The surface to be painted shall be made free from any loose paint, dust, grease and any fungus, algae or moss, on it shall be removed thoroughly by vigorous wire brushing and cleaning with water. Then one coat of exterior grade wall primer be applied after which any surface imperfection such as holes, dents, fine cracks shall be corrected by filling with external wall putty. Thereafter second coat of exterior grade wall primer and again surface imperfection to be corrected. Thereafter Asian royal interior paint to be applied in two coats.

providing and fixing electrical light point as per shown in drawing one way light point in 1 sq.mm wairing make VIR polycap, finolex, haveles or approved equivalent grade waire. For coving used pipe make sandeep , modi, diamond or equivalent grade. used cliping to hold pipe.

providing and fixing electrical light point as per shown in drawing two way light point in 1 sq.mm wairing make VIR polycap, finolex, haveles or approved equivalent grade waire. For coving used pipe make sandeep , modi, diamond or equivalent grade. used cliping to hold pipe.

providing and fixing electrical light point as per shown in drawing 16amp power point in 2.5 sq.mm wairing make VIR polycap, finolex, haveles or approved equivalent grade waire. and 1 sq.mm wairing make VIR green colour earthing For coving used pipe make sandeep , modi, diamond or equivalent grade. used cliping to hold pipe.

providing and fixing electrical light point as per shown in drawing 32amp power point in 4 sq.mm wairing make VIR polycap, finolex, haveles or approved equivalent grade waire. and 1 sq.mm wairing make VIR green colour earthing For coving used pipe make sandeep , modi, diamond or equivalent grade. used cliping to hold pipe.

providing and fixing electrical light point as per shown in drawing light sub main in 1.5 sq.mm wairing make VIR polycap, finolex, haveles or approved equivalent grade waire. with insulated 1 sq.mm wairing make VIR green colour earthing For coving used pipe make sandeep , modi, diamond or equivalent grade. used cliping to hold pipe.

providing and fixing electrical light point as per shown in drawing light sub main in 2.5 sq.mm wairing make VIR polycap, finolex, haveles or approved equivalent grade waire. with insulated 1 sq.mm wairing make VIR green colour earthing For coving used pipe make sandeep , modi, diamond or equivalent grade. used cliping to hold pipe.

providing and fixing lan cableing as per shown in drawing light cat 6 wairing make VIR polycap, finolex, haveles or approved equivalent grade waire. For coving used pipe make sandeep , modi, diamond or equivalent grade. used cliping to hold pipe.

providing and fixing telephone epbax as per shown in drawing light 2 pair wairing make VIR polycap, finolex, haveles or approved equivalent grade waire. For coving used pipe make sandeep , modi, diamond or equivalent grade. used cliping to hold pipe.

providing and fixing iii phase as per shown in drawing 4sq.mm main wairing make VIR polycap, finolex, haveles or approved equivalent grade waire. With insulated 1 sq.mm green coloured earthing For coving used pipe make sandeep , modi, diamond or equivalent grade. used cliping to hold pipe.

providing and fixing electrical light fitting as per shown in drawing 2' x2' grid fitting make wipro, philips, haveles or approved equivalent grade fitting. with choke

providing and fixing electrical light fitting as per shown in drawing 6"x6" 15 watt pannel light fitting make wipro, philips, haveles or approved equivalent grade fitting. with choke

wall demolition work as per shown in drawing

6" thk wall in red brick recontraction work with both side plaster sanla finished as per shown in drawing